| Pages:
1
2
3
4 |
Axt
National Hazard
Posts: 795
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
PLX type explosives
NM = 6210m/s in 15/16" glass tube (PATR 2700)
NM = 6350m/s (LLNL handbook)
PLX = 6165m/s in 15/16" glass tube (PATR 2700)
MEN-II = 5490m/s (LLNL Handbook)
PLX =
95% nitromethane
5% ethylenediamine
MEN-II =
72.2% nitromethane
23.4% methanol
4.4% ethylenediamine
No one knows the VOD of APAN/MEKPAN, but their explosive effect is considerably less then NM.
A lot of things sensitise NM, I wouldnt bother making ethylenediamine to form true PLX unless you need to know the exact properties of the explosive.
For a bang, try using 30% of 70% HNO3, never fails.
Edit by Chemoleo: Removed useless posts.
[Edited on 25-8-2006 by chemoleo]
|
|
|
Hideki Matsumoto
Banned
Posts: 32
Registered: 16-12-2004
Member Is Offline
Mood: No Mood
|
|
thnx
I was thinking about using Ethylene glycol and HCl to make Ethylene chloride then making a diamine that way... hmm, just curious...
|
|
|
Axt
National Hazard
Posts: 795
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
Im attaching a pdf on the mechanism for which amines sensitise nitromethane.
Attachment: Amine Sensitization in Shocked Nitromethane.pdf (161kB)
This file has been downloaded 3943 times
|
|
|
Macgyver
Harmless
Posts: 16
Registered: 3-8-2004
Location: Northern Territories
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Hideki Matsumoto
i am wondering how one makes ethylenediamine?
I am curious as to what it's det vol is in comparison to MEKPAN 9.1 or APAN.... |
It must not be ethylendiamine, works just as good with Tertiaryamines like what I believe is used as hardener in some two component epoxy glues....
|
|
|
Hideki Matsumoto
Banned
Posts: 32
Registered: 16-12-2004
Member Is Offline
Mood: No Mood
|
|
About MEKPAN and APAN
APAN has about 4500-5000m/s, I am not sure on this exactly.. I think this number can vary depending on what isomer is used. ...
Don't quote me on this but I think the Anhydrous Trimeric MEKP has more energy ( most of all MEKPs). Dvol is 6800-7000 m/s ballpark, but harder
to set off in compairison to AP .. APAN .. .etc..
MEKPAN III is about 6500-6700 m/s...
right now I have abandoned MEKP synthesis and am working on DPPP which defently is the target peroxide everyone is after.. dvol for this is up around
the 9000m/s mark... or so the patent says.. I beleive this though due to tests I have done..
[Edited on 21-12-2004 by Hideki Matsumoto]
|
|
|
searat
Harmless
Posts: 33
Registered: 13-12-2004
Member Is Offline
Mood: No Mood
|
|
Try rogue science ftp, it has the syn
|
|
|
franklyn
International Hazard
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Axt
PLX =
95% nitromethane
5% ethylenediamine
MEN-II =
72.2% nitromethane
23.4% methanol
4.4% ethylenediamine
|
The presence of 5% of Ethylenediamine sensitizes the detonable balance
of 95% of nitromethane.
Ethylenediamine by itself is also detonable providing it is stressed,
by nitomethane or in concentration of as little as 3% with Methylene chloride.
There's a small mention of that here _
http://www.aps.anl.gov/Safety_and_Training/User_Safety/chems...
__________________________________________
I always believed P L X comprised a stoichiometric neutral acid base 1/3 ED , and 2/3 NM
like this _
CLICK FOR FULL SIZE
this yeilds 13 moles 4CO + 2N2 + 7H2
_______________________________
Material Safety research indicates that detonating NM may
require nothing more exotic than the inclusion of air bubbles
or voids in the liquid itsself, and that these render it
shock sensitized. See _
http://72.14.209.104/search?q=cache:fIhytYmTKuQJ:ecb.jrc.it/...
[Edited on 31-7-2006 by franklyn]
|
|
|
mfilip62
pierced by a crossbow under a bridge while eating Billy goats
Posts: 140
Registered: 25-8-2006
Member Is Offline
Mood: I like turtles!
|
|
PLX Perfect explosive or what?
Hello,
Can anybody tell me something more about PLX?
PLX or Picatinny Liquid Explosive, is a liquid binary explosive, a mixture of 95% nitromethane and 5% ethylene diamine. It is a slightly yellowish
liquid. It was developed at Picatinny Arsenal during World War II for cleaning of minefields. It was to be mixed just before use.
I think it is perfect explosive for Shaped Charge(SC) and Explosively Formed Penetrator(EFP)!
Where cann i obtain chemicals?
Sensitivity(Primary or Secundary)?
VOD(I dont belive that it is actually around 9000 m/s!)?
denisty,risks....
|
|
|
Marsh
Hazard to Self
Posts: 79
Registered: 28-7-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by mfilip62
Hello,
Can anybody tell me something more about PLX?
PLX or Picatinny Liquid Explosive, is a liquid binary explosive, a mixture of 95% nitromethane and 5% ethylene diamine. It is a slightly yellowish
liquid. It was developed at Picatinny Arsenal during World War II for cleaning of minefields. It was to be mixed just before use.
I think it is perfect explosive for Shaped Charge(SC) and Explosively Formed Penetrator(EFP)!
Where cann i obtain chemicals?
Sensitivity(Primary or Secundary)?
VOD(I dont belive that it is actually around 9000 m/s!)?
denisty,risks.... |
What makes you make these "perfect" assumptions? I recommend you hang around and search, as it would appear most of this info is readily available.
Where the heck are you getting 9000m/s for PLX?
It is surely a secondary explosive, and I don't know why you didn't have the patience to get through the reading of post #1, but Vod's are already
listed!
As for obtaining chemicals, no one here is going to willingly offer their chem suppliers to you with such weak efforts demonstrated.
[Edited on 26-8-2006 by Marsh]
|
|
|
mfilip62
pierced by a crossbow under a bridge while eating Billy goats
Posts: 140
Registered: 25-8-2006
Member Is Offline
Mood: I like turtles!
|
|
Sorry,
I just readed from some crapy source!
I know ith was nonsense,but...nothing my mistake.
I dont want you to tell me who is your supplier,becouse you are probably from USA and it does not use me,youst I want to know
is where is ethylene diamine used for!
|
|
|
Deceitful_Frank
Hazard to Self
Posts: 82
Registered: 5-11-2005
Member Is Offline
Mood: Pensive
|
|
Nitromethane based liquid explosives
Hey guys!
I havent had a great deal of spare time of late with work and family commitments but I think my next practical will probably involve two steel strips
37cmX29mm and 7.5mm thick.
Two plastic 140ml bottles, one filled with a balanced for CO2 and H2O mix of NM and 70% HNO3 (70:30 by mass?) at density of 1.21g/cc.
The other filled with a balanced for CO and H2O mix of NM and EGDN (62:38 by mass) at density 1.26g/cc.
The former charge would have a slightly lower mass but a greater heat output due to balance for CO2, however it is around 9% water by mass overall
which would obviously sap some heat from the explosion.
The latter charge is of a slightly higher density and mass but a lower heat output due to balance for CO, However it would contain little or no water
and give a "drier" detonation!
Both charges to be affixed to the steel plates and fired with my extremely powerful 0.8 gram 3500psi pressed ETN in 5/16 brass tube caps. All filmed
on my new cheap and cheerful nv-gs27 DV cam!
Care to speculate on which charge would deform the metal the most or add further comments or suggestions?
Peace!
EDIT:
It would appear that I may have a problem with the validity of any results I may gain from this experiment.
The 70:30 mix of NM and 70% HNO3 I wanted to use for one of the charges does not appear to be balanced for CO2... or indeed CO for that matter! Its
the ratio that Axt used in some of his shaped charges and I naively just assumed it was balanced for maximum energy output or brisance. Maybe it was
formulated for sensitivity or a trade off between power and reliability. Maybe they were just random figures that seemed "about right".
Can anyone shed some light on this?
To balance for CO:
5CH3NO2 + HNO3 -----> 3N2 + 5CO + 8H2O
When using 70% HNO3 this equates to approx 77% NM and 23% acid. Obviously this minimizes water content but the density is disappointing at less than
1.2g/cc.
To balance for CO2:
5CH3NO2 + 3HNO3 ------> 4N2 + 5CO2 + 9H2O
When using 70% HNO3 this equates to approx 53% NM and 47% acid. This gives a better 1.26g/cc density, in fact on paper it is identical in this respect
to the EGDN/NM charge but 14% water by mass and only just over half NM... would it even fire from 0.8 grams pressed ETN and if it did, how detrimental
would that water be, not to mention whether the ingredients would even be miscible with that proportion of water!
There are just so many variables and I feel rather lost. Obviously with these 170-180 gram charges, either way I've got two very big bangs in the
pipeline and the potential for some cracking video but I also want to learn soimething new from this experiment.
Whatever happens there will be one approx 180 gram EGDN/NM charge in one of the 140ml bottles balanced for CO and of density 1.26g/cc firing on a
7.5mm steel plate. The other is open to suggestions so if anyone can make sence of my dilema and put forward a suitable ratio of NM and 70% HNO3 that
gives good density, power and a worthwhile test... please help!
[Edited on 3-10-2006 by Deceitful_Frank]
[Edited on 3-10-2006 by Deceitful_Frank]
[Edited on 3-10-2006 by Deceitful_Frank]
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Your witness plate is likely way overmatched by that
large of a charge , and probably a 30-50 ml charge would
give better indication .
You should try picric acid in nitromethane too , as unlike
the other mixtures , it should be perfectly stable and
relatively safe , a liquid that may be ~ 75% of dissolved picric acid IIRC , and should have cap sensitivity as
well as metal cutting brisance .
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Has the solution of picric acid in nitromethane been tried? Do you have any data on the solubility of ammonium picrate in nitromethane?
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Yeah , according to the US Army it has been tested .
35ml of ~ 50:50 mixture blows a 7" diameter hole
through 1/2" steel plate .
The patent says that at room temperature a solution
containing 87.5% picric acid in nitromethane is possible .
It is very likely that such a solution would result in a
cap sensitive mixture when soaked into dried NH4NO3
or NH4ClO4 .
Attachment: US5140908 nitromethane and picric acid liquid explosive.pdf (159kB)
This file has been downloaded 1953 times
|
|
|
nitro-genes
International Hazard
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
| Quote: | Originally posted by Rosco Bodine
It is very likely that such a solution would result in a
cap sensitive mixture when soaked into dried NH4NO3
or NH4ClO4 . |
What would be the benefit of doing so, instead of using plain NM?! 
ANNM in itself is sensitive enough and fires reliably from a #6 cap. The only value of the added picric acid to the NM is to increase the brisance,
since PLX formulations are not very brisant alone. But if you just want to add it to alot of AP or AN the increased detonation pressure added by the
TNP will be hardly noticed IMHO.
The mixture in the patent just looks like a PLX formulation with an added "bite". Other than that the acidity of the TNP might sensitize the mixture
some more it looks to me that adding 50% of either PETN, ETN or TNT will have exactly the same effect. Not sure about their solubility in NM though...
[Edited on 5-10-2006 by nitro-genes]
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Mainly the benefit is the stability of the mixture , increased density , and a way to get a whole lot of picric acid liquified at relatively low
temperature . It would have most value in my estimation as a means of introducing picric acid as a very fine dispersion in
a powdered explosive oxidizer , or possibly into some
melts , or water gels . And it does add some power and density to nitromethane . This is just a bit of information
which could be useful when consideration of mixtures
involving nitromethane is relevant .
|
|
|
Chris The Great
Hazard to Others
Posts: 463
Registered: 29-10-2004
Location: Canada
Member Is Offline
Mood: No Mood
|
|
For some people nitromethane might be a real pain to get, and adding picric acid to it not only increases the power a decent amount and makes it
safer, but they also find it cheaper and easier to make picric than distill nitromethane from model car fuel.
|
|
|
nitro-genes
International Hazard
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
The mixture of TNP with NM does look vey powerfull, estimated detonation pressures in the same range of cast TNT, but with all the benefits of a
liquid explosive. My point was mainly that if you would make a highly brisant mixture like this, it would be such a waste to just pour it over some
AN...
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Picric acid is much more sensitive to initiation than is NM
and it is likely to produce mixtures of increased sensitivity
and brisance , and increased density , as well as lowered
volatility over mixtures using NM alone or NM with xylene
for example as an extender . The combination of NM and picric acid in high proportion could be used for the sensitizing component for NH4NO3 or
NH4ClO4 . When
heated slightly , an even more concentrated solution
of picric acid in NM may be possible than the 87.5% possible at room temperatrure , so the NM may be thought of as almost a " melting aid " for picric
acid ,
in producing a mixture from which will crystallize some
of the picric acid during cooling . This could be useful
in creating mixtures with explosive oxidizers which are
blended warm , because when cooled there will be
dispersed crystals of picric acid trapped in the spaces
between the crystals of oxidizer , along with liquid which
is also a sensitizer . This system should be a more
sensitive and brisant mixture than usual kinepak type
mixtures where NM alone or NM plus xylene is used ,
possibly having substantially higher performance .
|
|
|
quicksilver
International Hazard
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
IIRC NM is hygroscopic. Would this have any effect on the stablity and / or proformance of the mix? Seeing as how the length of time required to
obtain water from the air would also introduce an element of evaporation I suppose the point is moot; but still I am wondering if such a thing is an
issue. With the KinePac material the NM is a sealed pouch, opened at the point of usage. This would seemingly demand the same proceedure and thus a
Hell of a lot of mixing, no?
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
It would probably not really require mixing at all .
Simply tap down the container to settle the crystals of the NH4NO3 or NH4ClO4 , and pour the liquid onto the material , where after sitting idle for a
few minutes the effect would be like pouring water on a sponge .
In a one quart motor oil bottle or a gallon antifreeze jug ,
this composition would probably also be a reactive target . And it would very likely be storage stable in
a sealed container .
|
|
|
Deceitful_Frank
Hazard to Self
Posts: 82
Registered: 5-11-2005
Member Is Offline
Mood: Pensive
|
|
Yes, though with kinepak type compositions the partical size of the AN should be small enough to hold on to the liquid sensitizer but be large enough
to allow a half decent density.
Sure, repeated activation and microscopic particle sizes do promote homogenuity but try getting this material over 1g/cc in the charge container by
hand...
Ive found that by using purely AN and NM (no xylene) in a 4:1 ratio by mass (slightly O2+), and if the AN is baked just twice and ground well in a
pestle, it just about holds onto the NM and in the following test I was easily able to acheive a dry, sensitive charge of 1.1g/cc density.
Its not the experiment I had planned as I couldnt lay my hands on the bottle of nitric acid but I think its an entertaining video all the same.
Strangely, the Kinepak blew the 7.5mm thick witness plate into THREE peices... should have listened to Rosco! oh, and you also get to see my second
ever failed detonation!
Enjoy:
http://media.putfile.com/Please-work-17
Its a 22 meg file that takes a few minutes to load so you will need to be patient :
[Edited on 7-10-2006 by Deceitful_Frank]
[Edited on 7-10-2006 by Deceitful_Frank]
|
|
|
MephistosMinion
Harmless
Posts: 24
Registered: 16-1-2005
Member Is Offline
|
|
Part B of 2 part epoxy works... Works well...
|
|
|
grndpndr
National Hazard
Posts: 508
Registered: 9-7-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by nitro-genes
The mixture of TNP with NM does look vey powerfull, estimated detonation pressures in the same range of cast TNT, but with all the benefits of a
liquid explosive. My point was mainly that if you would make a highly brisant mixture like this, it would be such a waste to just pour it over some
AN... |
I looked over the patent several times and I coudnt see any improvement using a mixture of TNP/NM up to the maximum NM content over a similar charge
of TNP?As NM IS so difficult for most of us to obtain I failed to see the advntage in the witness plates and mix ratios over plain TNP?"estimated
detonation pressures in the sAme range of cast TNT"? TNP has a higher VOD than TNT alone
[Edited on 29-6-2008 by grndpndr]
|
|
|
497
National Hazard
Posts: 778
Registered: 6-10-2007
Member Is Offline
Mood: HSbF6
|
|
Another possible high powered explosive solvent for picric acid is methyl nitrate. I don't know anything about the solubility, but MN is substantially
more powerful and brisant than nitromethane and also easier to make than it is to get nitromethane for most of us. I know MN is a bit unstable, maybe
the picric acid would help, or maybe the addition of a third compound to help the solubility and/or stability? It would surely have ungodly brisance.
And before anyone brings up MEKP, no TNP is not soluble in it, I've tried it. In fact a roughly 100g charge of about 1:2 MEKP/AP:TNP failed to
detonate the TNP, simply covered the surrounding snow in yellow dust. It was only ignited by a fuse though.
Someone really needs to figure out an OTC synthesis of nitromethane...
Edit: Nitromethane can be synthesized with at least 60% yield from sodium nitrite and bicarbonate reacted for a few hours with excess methyl chloride
(bromide, iodide). Doesn't look too hard, methyl halides shouldn't be too hard to synthesis and sodium nitrite is OTC. Methyl iodide boils at 42*C so
the process could possibly be done near 1 atm. Nitromethane is supposedly not soluble in methyl halides so separation is simple. I'm thinking a
pressure cooker could work well as a reaction vessel.
I doubt it Zinc. MEKP seems to be a very bad solvent for almost anything.
[Edited on 2-7-2008 by 497]
|
|
|
| Pages:
1
2
3
4 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
