| Pages:
1
2 |
Electra
Hazard to Others
Posts: 179
Registered: 11-12-2013
Member Is Offline
Mood: No Mood
|
|
Where can I get relatively pure ethanol?
While I know it will be hard to get 100% due to moisture absorption, but is there any way to get clean ethanol in the USA? I have some reactions I
want to run and denatured alcohol with methanol and whatever else they add into it will provide some very undesirable contaminants to my product that
won't simply evaporate away. I would rather not have to distill anything.
Water in the ethanol is not an issue. I figured I could go down to the liquor store and pick up the highest concentration I can find, but do they even
make alcohol without flavorings in it? My state doesn't sell Everclear to my knowledge.
I know for like $300 I could get a licenses to produce ethanol "fuel", but I am not sure if such a license is required for its purchase. Any
suggestions?
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
What volume of alcohol do you anticipate requiring?
|
|
|
PeeWee2000
Hazard to Self
Posts: 58
Registered: 2-7-2013
Location: Michigan
Member Is Offline
Mood: No Mood
|
|
They usually have stuff that isnt purposley denatured, but often has trace chemicals to obtain the purity desired on ebay so still not good for any
sort of food use but is quite pure.
http://www.ebay.com/itm/Spectrum-Ethyl-alcohol-Ethanol-absol...
“Everything is relative in this world, where change alone endures.”
― Leon Trotsky
|
|
|
numos
Hazard to Others
Posts: 269
Registered: 22-2-2014
Location: Pasadena
Member Is Offline
Mood: No Mood
|
|
Try the pharmacy, you can usually buy 70% pure ethanol labeled as "ethyl alcohol" diluted with water
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
What reactions are you running? If it's just a solvent, isopropanol is often a good substitute.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Electra
Hazard to Others
Posts: 179
Registered: 11-12-2013
Member Is Offline
Mood: No Mood
|
|
Quantities under 1000ml to start, but could be more if I need it later. I do not need it just as a solvent. Additives such as Acetone, Isopropyl
Alcohol, Methanol, or any other alcohols or carbonyls will hurt the purity of my final product.
Water content of the alcohol wouldn't matter since the final products easily separate from water, so my best bet may just be trying to find the
highest grade I can get at the liquor store.
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
I guess you should get vodka with the highest repetition of distillations on the bottle. I've seen five times distilled go for $17 at some places,
since it was purchased in bulk from non-Russian countries.
Edit- that was earlier this year, too, in a US market. I'm assuming your geography is analogous.
[Edited on 30-3-2014 by Chemosynthesis]
|
|
|
essbee
Harmless
Posts: 14
Registered: 5-1-2014
Member Is Offline
Mood: optimistic
|
|
Ethanol
Don't you guys have E85 bio gasoline? 85% dry ethanol and 15% gas. A good chemist could distil off the low bp 15% without causing a serious fire and
be left with ~100% ethanol.
|
|
|
copperastic
Hazard to Others
Posts: 158
Registered: 15-3-2014
Location: In your basement
Member Is Offline
Mood: Good
|
|
If your over 21 you can buy some Ever clear . Its 95 percent ethanol.
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by essbee  | | Don't you guys have E85 bio gasoline? 85% dry ethanol and 15% gas. A good chemist could distil off the low bp 15% without causing a serious fire and
be left with ~100% ethanol. |
I doubt that would be as simple as that. Gas is so complex of a mixture I am pretty sure you will have azeotropes that would need to be broken with
clever vacuum work, or liquid phase column chromatography.
|
|
|
Texium
Administrator
Posts: 4581
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
| Quote: Originally posted by numos | | Try the pharmacy, you can usually buy 70% pure ethanol labeled as "ethyl alcohol" diluted with water |
I almost bought some of this 70% ethanol from Walgreens, but then I looked up the ingredients and found that along with being diluted with water, it
had a ton of other stuff in it, making it not a viable option for any sort of lab use.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
Maybe you saw this useful thread recently:
https://www.sciencemadness.org/whisper/viewthread.php?tid=29...
Mixing this product here:
http://www.homedepot.com/p/Klean-Strip-1-Qt-M-E-K-Substitute...
with this product there:
http://www.lowes.com/pd_486650-331-HD-CRY-DO_0__?productId=4...
gives a useful mess of sodium acetate and ethanol. The ethanol can be simply distilled right out of the can according to
the method described in this video:
http://www.youtube.com/watch?v=DT35x-2aR6g
It does involve a distillation, albeit a simple one. A couple feet of refrigerator tubing pressed into the cap, with the can heated
gently in a warm water bath, might give the desired results.
My 2 cents....
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
In California the liquor stores sell Everclear as a 75% alcohol/water mixture; in North Carolina (when I used to live there) Everclear was 95%. I
don't know about other states. I've distilled the California Everclear to get a higher concentration. It's not super cheap, you pay a lot in taxes.
I have also distilled cheap wine to get alcohol. You could also brew your own.
Any other SF Bay chemists?
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
You definitely need a license to buy ethanol for "fuel" that is not pre-mixed with gasoline or other nasties. If you only want small amounts, most
liquor stores sell smaller bottles of relatively pure ethanol for flavor extractions and other uses, already taxed, but quite strong without
flavoring. I have used such in the past, and know that some states allow that. Otherwise you will have to make your own, you could distill any of
many sources, or even make your own starting material with sugar and yeast, it is easy to find directions on the internet for bioethanol, but it is
not trivial to distill it, even to 95% purity. If it needs to be anhydrous, then it will be hard to get without work, or using denatured sources and
purifying it, unless you can find an ATF license holder to buy it that way. That is a major pain as it is a government agency with little sense of
humor or home science interest.
|
|
|
copperastic
Hazard to Others
Posts: 158
Registered: 15-3-2014
Location: In your basement
Member Is Offline
Mood: Good
|
|
Wisconsin has 95 percent.
|
|
|
numos
Hazard to Others
Posts: 269
Registered: 22-2-2014
Location: Pasadena
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by zts16 | | Quote: Originally posted by numos | | Try the pharmacy, you can usually buy 70% pure ethanol labeled as "ethyl alcohol" diluted with water |
I almost bought some of this 70% ethanol from Walgreens, but then I looked up the ingredients and found that along with being diluted with water, it
had a ton of other stuff in it, making it not a viable option for any sort of lab use. |
You're right, it does include some other ingredients :/ looks like I need a new source for ethanol. Although for cleaning it works great!
|
|
|
Steam
Hazard to Others
Posts: 238
Registered: 25-3-2014
Location: Minnesota
Member Is Offline
Mood: Triple Point
|
|
Try buying a bottle of 95% everclear, you could dry it using standard methods for alcohols.
Maybe you could distill it over sodium?
DISCLAIMER: The information in this post is provided for general informational purposes only and may not reflect the current law in your jurisdiction.
No information contained in this post should be construed as legal advice from the individual author, nor is it intended to be a substitute for legal
counsel on any subject matter. No reader of this post should act or refrain from acting on the basis of any information included in, or accessible
through, this post without seeking the appropriate legal or other professional advice on the particular facts and circumstances at issue from a lawyer
licensed in the recipient’s state, country or other appropriate licensing jurisdiction.
|
|
|
Zephyr
Hazard to Others
Posts: 341
Registered: 30-8-2013
Location: Seattle, WA
Member Is Offline
|
|
If you do not have access to Everclear and desire purity higher than 70%, I have bought 90% ethanol at a local hardware store. This is in Washington,
but I think that if you want to purify it further, it is worth it to go the extra mile to get the 90% stuff as opposed to the 70% ethanol solution.
A method of drying simpler and safer than distillation over sodium would be to mix the alcohol with anhydrous magnesium sulfate.
|
|
|
essbee
Harmless
Posts: 14
Registered: 5-1-2014
Member Is Offline
Mood: optimistic
|
|
| Quote: Originally posted by Chemosynthesis | | Quote: Originally posted by essbee | | Don't you guys have E85 bio gasoline? 85% dry ethanol and 15% gas. A good chemist could distil off the low bp 15% without causing a serious fire and
be left with ~100% ethanol. |
I doubt that would be as simple as that. Gas is so complex of a mixture I am pretty sure you will have azeotropes that would need to be broken with
clever vacuum work, or liquid phase column chromatography. |
Well it worked fine for me, double distilling got rid of a very slight 'oily' smell and then I used the 'pure' ethanol for extractions and synthesis
with no problems at all.....'pretty sure' there were no azotropic issues.
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by essbee |
Well it worked fine for me, double distilling got rid of a very slight 'oily' smell and then I used the 'pure' ethanol for extractions and synthesis
with no problems at all.....'pretty sure' there were no azotropic issues.
|
That is impressive. I would be slightly leery to distill gasoline without vacuum, preferably inert atmosphere. I'm glad that worked for your
purposes, but unless you have spectra available (preferably clean NMR), I am extremely skeptical that your ethanol was what I would consider pure,
especially if you only re-distilled once. I know I've had to rotovap, and sometimes flash chromatograph multiple times to get clean spectra from
single reactions stages. The complexity of gasoline, if the OP seems concerned about denatured or possibly absolute alcohol, is what I consider
extreme. Other alcohols in particular, which the OP is concerned about, can be present in at least a few percent in gasoline; for this reason alone,
compounded by the addition of alkenes and lack of knowledge of the specific reaction(s) intended, I would be reluctant to suggest it without
additional data indicating a grade or standard of extraction purity. The variation of gasoline compositions between states, seasons, and sometimes
counties doesn't even ensure repeatable sampling.
http://www.afdc.energy.gov/fuels/ethanol_e85_specs.html
http://www.us.edu.pl/uniwersytet/jednostki/wydzialy/chemia/a...
http://www.atsdr.cdc.gov/toxprofiles/tp72-c3.pdf
edit meant re-distill, not distilled once.
[Edited on 31-3-2014 by Chemosynthesis]
|
|
|
Steam
Hazard to Others
Posts: 238
Registered: 25-3-2014
Location: Minnesota
Member Is Offline
Mood: Triple Point
|
|
If you can't go buy your own ethanol, you could just make your own!
Just look up "how to make moonshine"! 
DISCLAIMER: The information in this post is provided for general informational purposes only and may not reflect the current law in your jurisdiction.
No information contained in this post should be construed as legal advice from the individual author, nor is it intended to be a substitute for legal
counsel on any subject matter. No reader of this post should act or refrain from acting on the basis of any information included in, or accessible
through, this post without seeking the appropriate legal or other professional advice on the particular facts and circumstances at issue from a lawyer
licensed in the recipient’s state, country or other appropriate licensing jurisdiction.
|
|
|
zed
International Hazard
Posts: 2283
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
I have the impression that 190 proof (95%) ethanol is sold in Oregon State Liquor stores. I also have the impression, that it costs about 60 bucks a
gallon. Used to be the federal tax was about 30 bucks a gallon. AND, the feds really do want their tax money. They are deadly serious about it.
http://www.oregonliquorsearch.com/servlet/FrontController?vi...
[Edited on 9-4-2014 by zed]
|
|
|
Texium
Administrator
Posts: 4581
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Texas has the 95% stuff. I don't understand why anybody would want to consume it, but I'm glad that they sell it, for the sake of chemistry.
|
|
|
Loptr
International Hazard
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
VA does not sell Everclear.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
A quote from an article about a Wisconsin lawmaker trying to ban Everclear:
"States that currently ban the sale of Everclear include California, Florida, Maine, Massachusetts, Hawaii, Iowa, Michigan, New York, Nevada, Ohio,
Washington, North Carolina, New Hampshire and Minnesota."
If you live in one of the above states (except Hawaii) just take a field trip to an adjacent state that sells it. Field trips to obtain reagents are
one of the exciting aspects of this hobby.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
