Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Foul smellers: tert-Butyl isocyanide?
testimento
Hazard to Others
***




Posts: 351
Registered: 10-6-2013
Member Is Offline

Mood: No Mood

[*] posted on 7-2-2014 at 02:30
Foul smellers: tert-Butyl isocyanide?


Does anyone have the synthesis of this substance? On itself the molecule doesn't look complex, but the synthesis seems to be. Wiki cites one route from butylamine:

Me3CNH2 + CHCl3 + 3 NaOH → Me3CNC + 3 NaCl + 3 H2O

This synthesis contains two problematics. One is the benzyltriethylammonium chloride, and the second is, tert-butylamine. Could the PTC be replaced with something else, and are there any feasible routes for t-butylamine, for ex. from butyl rubber?

On the topic, what are the nastiest (isocyanides) in terms of malodor?
View user's profile View All Posts By User
BromicAcid
International Hazard
*****




Posts: 3247
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline

Mood: Rock n' Roll

[*] posted on 7-2-2014 at 04:41


Make your t-butylamine into an N-substitued formamide, dehydrate with phosphorous oxychloride or phosgene in the presence of triethylamine (TEA).

Me<sub>3</sub>CNHC(O)H + COCl<sub>2</sub> ----> Me<sub>3</sub>CNC + CO<sub>2</sub> + 2 HCl (Mopped up by TEA)

Of course who wants to work with phosgene or phosphorus oxychloride? I have heard of the chloroform method several times and that it is acceptable for lab-scale preparations. I am sure you could experiment with different phase transfer catalysts that you have more available that may help your cause. Sometimes the development is half the fun.

As for the stench... I have posted several times on this forum about the stench of these creatures (having made most of the simple isonitriles at the kilo scale). It's bad... really really bad.... and when it stops being bad, then it's even worse for those around you. Sometimes the smell will linger on your clothes for days. Early work on many of these compounds was abandoned on the basis of odor alone, and that was back when people were not deterred very easily. If you are making quantities of this, cover your skin, cover your nose. Suit up so you can remove the suit and not bring the stink with you. Quench with hydrochloric acid / methanol solution. Drink orange juice to get rid of the taste in the back of your throat.

The "Things I Will Not Work With" blog lists butyl isocyanide as the nastiest of the bunch. It's horrible but at that level.... it's a crap shoot.




Shamelessly plugging my attempts at writing fiction: http://www.robvincent.org
View user's profile Visit user's homepage View All Posts By User
testimento
Hazard to Others
***




Posts: 351
Registered: 10-6-2013
Member Is Offline

Mood: No Mood

[*] posted on 7-2-2014 at 07:39


Aww, that one seems to turn out really nasty route. A bunch of impossible-to-get chemicals, or then 10 steps from OTC stuff. Yeah, I've got to admit I'd looked for something like from butyl alcohol and so on. :D

I have understood that these are really nasty ones, so if I find synth that is within my limits, I have a remote place several miles away from any human existence and proper gear (chem suits and full resp masks) where I would attempt to synthetize it. I'm pretty interested in these nasties and saw that phenylisonitrile could be made quite more easily from aniline and chloroform. How "bad" would you compare phenyl- and t-butyl isonitriles in terms of stench?
View user's profile View All Posts By User

  Go To Top