| Pages:
1
2
3
..
5 |
SAACS
Harmless
Posts: 1
Registered: 6-2-2014
Member Is Offline
Mood: No Mood
|
|
I want to hear your favorite chemistry demonstrations
Every year our university chem club goes to a children's museum and conducts some interesting demonstrations for the age range of roughly K-5. Some
examples are: gummy bear + KClO3, elephant toothpaste, and a ball pit explosion using a bottle filled with LN2 in a trash can. We bring plenty of LN2
and have access to a lab and other ways of getting any necessary materials. The only caveat is that while we can work inside or outside, we have no
fume hoods at the children's museum.
What demonstrations do you like the most?
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
chemical chameleon is nice
all above information is intellectual property of Pyro.  |
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Water-initiated flash powder.
Chloric acid (from KClO3+H2SO4) and sugar.
Aluminium and iodine plus a few drops of water.
About .5 gram NH3, nice iodine vapor, initiated with feather.
Sodium peroxide + sugar and add drop of water to get going.
[Edited on 6-2-2014 by Zyklonb]
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
Tossing a small scooop of KMnO4 into a tall beaker with a small layer of 35% H2O2 in the bottom makes an impressive
little mushroom cloud poof out. Be careful though, it is like elephants toothpaste but can spit a little if you use too much peroxide or the container
is too small. You can also submerge a glowing splint into the beaker to demonstrate O2.
|
|
|
Brain&Force
Hazard to Lanthanides
Posts: 1302
Registered: 13-11-2013
Location: UW-Madison
Member Is Offline
Mood: Incommensurately modulated
|
|
Fluorescence of pyranine (found in highlighters)
Tollen's reagent
Bismuth diamagnetism
Coordination chemistry of Ni2+ and Cu2+ with ethylenediamine, ammonia and chloride
Burning magnesium and spraying water on it
Gummy bear in chlorate
Flame tests in methanol/ethanol
Fake blood (iron thiocyanate)
Heating iodine
Reaction of aluminum with iodine
Ammonium chloride smoke
Aluminum with copper chloride/HCl
Alkali metals in water
Precipitation of unusually colored precipitates (cobalt hydroxide, lead iodide)
Dichromate redox
Iodine clock
I could go on forever...
[Edited on 6-2-2014 by Brain&Force]
At the end of the day, simulating atoms doesn't beat working with the real things...
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
What do you mean ''Burning magnesium in water''? Do you mean spray water on a burning Mg ribbon, or what?
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
Burning Magnesium in Water
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I actually do a science stage show for the same target audience. We go to local elementary schools and do a 45 minute show to get the kids interested
in STEM (Science, Technology, Engineering, and Math) career fields. We have videos and a couple experiment descriptions on our website, www.sciencebrothers.org .
My favorite demonstration of our show is the Barking Dog. Thanks to woelen here on this site, I use a much safer version that produces a green flame
instead of the usual blue*. Elephant Toothpaste is probably the most popular with the kids. The chemical traffic light is also pretty good and simple,
and by using the same chemicals with a different dye you can change it up and perform the Blue Bottle demo.
I really enjoy doing the show. It's a great feeling to see kids get so excited about science. Good luck with yours!
*Edit: To clarify: it's safer because it replaces carbon disulfide with methanol with a little boric acid dissolved in it. The standard barking dog
produces sulfur and sulfur dioxide as products, which make cleaning the tube annoying and produces sore throats, respectively. Using methanol/boric
acid instead results in harmless byproducts (boron trioxide, most likely) and the tube cleans out easily with a water rinse.
[Edited on 2-7-2014 by MrHomeScientist]
|
|
|
confused
Hazard to Others
Posts: 244
Registered: 17-3-2013
Location: Singapore
Member Is Offline
Mood: tired
|
|
i like the iodine clock reaction, never fails to amaze people
|
|
|
sargent1015
Hazard to Others
Posts: 315
Registered: 30-4-2012
Location: WI
Member Is Offline
Mood: Relaxed
|
|
By far my favorite demos are:
1) Hydrogen Balloons
2) Metal salts in a flame
3) Whoosh Jug (Ethanol in a large office water jug, vaporized, and ignited)
-Sarge
|
|
|
Ascaridole
Hazard to Self
Posts: 67
Registered: 11-9-2013
Location: Hawaii, USA
Member Is Offline
Mood: Searching for glass....
|
|
1) Oxidation states of Vanadium using amalgamated zinc and Cerium (IV) to re-oxidize it back to its so so yellow: Kinda advanced but shows some nice
analytical technique with beautiful color changes especially the 3+ blue… mmmm….ok maybe not for K-5 but hey it hooked me on chemistry….
2) Liquid oxygens paramagnetism and blue color: Nice way to talk about spin and free electrons and the color blue… also good for showing big flames
at the end.
3) Thermal decomposition of Iron oxalate to pyrophoric Iron: Fire is always nice, fire is even more fun when all you need is air…. nice way to show
how a nail can catch fire if you can smash it up enough. Oh and you can even drop the pyrophoric iron into the liquid oxygen for a big kicks!
Ascaridole, the masked bandit of chemistry!
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
On a related note to 'Burning Magnesium in Water', Al can also react with water in an even more spectacular way than the Mg in the video. Make an
un-stoichiometric 'flash powder', by mixing about 1 gram of KClO3 for every 4.5-6 grams of Al.*
Light it with a fuse and then wait for it to stop burning, then most of the Al will not have burned, but it will still be glowing red hot.
Take a syringe (or pipette) full of water and spray a lot of water on the pile of glowing Al. It will instantly burst into a bright white flames as
the Al reduces the water to H2 , and on top of the pile the H2 will react with more oxygen in the air and give off a nice blue
flame, very pretty.
*The reaction looks much better in larger quantities than 1g KClO3 and ~5g Al. For best results try 3g KClO3 with ~15g Al. If a
lot of water is sprayed on that, it will likely Fizz for a couple seconds then erupt into bright white flames, shooting burning Al in all directions!
(looks a lot like fireworks).
Be very carful with this and if you show the reaction to kids, absolutely do not do it inside! Also try it a few times yourself before showing to
anyone, just to get the hang of it. And wear all necessary protective clothing, if the reaction goes well, it is worth the effort.
[Edited on 8-2-2014 by Zyklonb]
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
I'll answer
this : http://www.youtube.com/watch?v=2udiRj6vYag
and this : http://www.youtube.com/watch?v=h4pNXAtPJp8
The first one is way too toxic to be performed without fume hood with kids, but it is so great The seconth one might be doable outside.
Also, simply "dissolving" styrofoam into acetone can be rather impressive and this one is totally safe! http://youtu.be/6S4zfMdjQxY?t=1m11s
[Edited on 8-2-2014 by alexleyenda]
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Wow! That first video was badass, I've seen both of those reactions, but not at the same time.
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
Yup both at the same time is really awesome, it looks like the doors of hell opening :p
|
|
|
Chemosynthetic
Harmless
Posts: 19
Registered: 12-11-2013
Member Is Offline
Mood: No Mood
|
|
I'm really glad to hear people are still involved in their communities with science outreach. I always liked iodine clock and oscillatory reactions
since they really made me see equilibrium in a different manner than prior.
|
|
|
sasan
Hazard to Self
Posts: 92
Registered: 22-2-2014
Location: TEHRAN / IRAN
Member Is Offline
Mood: Radiative
|
|
Try a drop of CS2 and let it avaporate in a measuring cylender and ingest N2O with a syrenge into the cylender.there will be very bright blue light
and a strange sound,barking dog!!!!
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
This isn't the coolest or my favorite but I did find it original, that's for sure. Blue bottle demo, edible style.
http://www.stevespanglerscience.com/color-changing-powerade
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
That's astonishing. Great find!
The standard blue bottle requires dextrose, sodium hydroxide, and methylene blue. In his version, the dextrose would be from the Sweet N Low and I
imagine the dye is in the Powerade. But tonic water is acidic, so there must be something in the cinnamon Altoid, and only the cinnamon variety, that
basifies the solution. Very very interesting. I wonder how he discovered something like that; seems like a pretty random combination.
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by sasan  | Try a drop of CS2 and let it avaporate in a measuring cylender and ingest N2O with a syrenge into the cylender.there will be very
bright blue light and a strange sound,barking dog!!!!
|
Please note- the word you want is "inject". To ingest something means to eat or drink it. (And I think the barking dog uses NO, not N2O.)
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I routinely perform the barking dog with nitrous oxide, N2O, and it works great. And you need a source of ignition to get the reaction to
start - just mixing CS2 and N2O in a flask doesn't do anything.
|
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
Would helium affect the pitch of the bark?
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by MrHomeScientist | | I routinely perform the barking dog with nitrous oxide, N2O, and it works great. And you need a source of ignition to get the reaction to
start - just mixing CS2 and N2O in a flask doesn't do anything. |
Okay. I do know that it *does* work with NO- I was shown how to do it, generating NO from copper/nitric acid (and scrubbing the gas well with water
to remove NO2, which would have detonated).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
NedsHead
Hazard to Others
Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline
Mood: No Mood
|
|
I tried to perform the elephant toothpaste reaction many times today without very impressive results,
I first tried 50ml of 50% H2O2, 5g potassium iodide solution, 25ml kitchen detergent (poor result) followed by the same amounts
but replacing the kitchen detergent with sugar soap ( a little better this time)
Then I tried the same amounts of H2O2 and potassium iodide with a much smaller, unmeasured amount of sugar soap but still didn't
achieve the impressive expansion of foam expected with this novelty reaction.
I thought it could be an issue with the 2 different bottles of H2O2 I tried and have had in storage for a long time so I bought
a fresh bottle at the local hydroponic store but still had the same results.
Any ideas what might be going wrong?
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Three things:
- How concentrated is your "potassium iodide solution"?
- You're using a ton of soap, which I'm sure is diluting and slowing the reaction.
- You can easily check the concentration of your peroxide to make sure it hasn't degraded by measuring the density, and using this calculator.
Our version of elephant toothpaste uses 125mL of 35% H<sub>2</sub>O<sub>2</sub> with maybe < 10mL liquid dish soap, just
enough to lightly color the solution and produce bubbles. To this we quickly add a solution of 12g KI in 10mL water (so, a saturated KI solution).
This is done in a 1000mL plastic graduated cylinder, and shoots a column of foam out the top several feet in the air.
One time the manufacturer accidentally filled one of our 35% bottles with 50% peroxide, and using the same conditions as above blasted the foam out
instantaneously, spraying hot foam onto the presenters. Scary situation. Now we test each new bottle of peroxide before use. Be careful with that
strength of peroxide.
|
|
|
| Pages:
1
2
3
..
5 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
