dorkwad
Harmless
Posts: 17
Registered: 23-1-2014
Member Is Offline
Mood: No Mood
|
|
Universal Joint Connecting?
Hi, just wondering if there's any already made way of connecting, say a 24/40 and another size of joint together, or if I could use something
unreactive to make a snug fit?
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
These are called enlarging or reducing adapters in glass suppliers catalogs.
|
|
|
bfesser
|
Thread Moved
6-2-2014 at 05:10 |
Dr.Bob
International Hazard
Posts: 2736
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Yes, they make adapters for almost every conceivable joint size to each other, even from taper to spherical joints. Do you have a specific joint
size in mind?
|
|
|
dorkwad
Harmless
Posts: 17
Registered: 23-1-2014
Member Is Offline
Mood: No Mood
|
|
No i'm misunderstood, im looking for a more DIY kind of application, like for say if the connectors arent measured out to any standard, im thinking of
almost a kind of "gluey" substance that could fill the gaps at the joint connection.
If something like this hasnt been made, could anyone suggest a substance that could be used for this that wouldnt react with any organic or inorganic
reactions?
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
What temperatures and materials are involved?
[Edited on 6-2-2014 by Mailinmypocket]
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by dorkwad  | | Could anyone suggest a substance that could be used for this that wouldnt react with any organic or inorganic reactions? |
No, because that's impossible. Depending on your aplication, you may want to consider trying <a
href="viewthread.php?tid=13257">Sugru</a>.
|
|
|
dorkwad
Harmless
Posts: 17
Registered: 23-1-2014
Member Is Offline
Mood: No Mood
|
|
Well i guess everything, im making a chemistry set by myself through glassblowing, im just afraid that my molds, even though they will be measured as
well as possible, may have some tiny inaccuracies that I'd need to fill in order to keep boiling chemicals from spurting out and such
|
|
|
PeeWee2000
Hazard to Self
Posts: 58
Registered: 2-7-2013
Location: Michigan
Member Is Offline
Mood: No Mood
|
|
For female joints you could try using some rubber stoppers (I have them easily avalible at my hardware store from tiny to giant) and use a stopper
borer then you can connect your glassware with glass tubing in the bored holes and they have premade glassware that goes into bored holes like I'm
referring to
http://www.ebay.com/itm/400mm-Graham-condenser-24-40-top-joi...
But the applications with rubber are pretty limited, basically nothing that involves strong organic solvents or strong acids\bases. To seal and keep
things from freezing up I usually use petroleum jelly, or you could try some high vacuum grease if that suits your application better.
As for an improvised way to connect a male joint I dont know any decent ways off the top of my head.
The only "gluey" substance I can think of that might be any use is Silicone, not the best for structure but its got decent chemical resistance and
thermal stability and its supposed to adhere to glass decently.
And if youre making your own glassware I believe they sell pre made tapered joints that you can fuse to your glassware, I don't know much about it
though youd have to do some more research on it.
Just google your preferred joint size + "glass blowing" and you should find stuff like this.
http://www.ebay.com/itm/JOINTS-24-40-Inner-Extended-Drip-LOT...
[Edited on 7-2-2014 by PeeWee2000]
“Everything is relative in this world, where change alone endures.”
― Leon Trotsky
|
|
|
zenosx
Hazard to Others
Posts: 188
Registered: 7-7-2012
Location: East TN / Near Oak Ridge
Member Is Offline
Mood: Awaiting Results....
|
|
If blowing your own glass I have seen std joints on the end of glass tubing and even plain stopcocks. If you plan to distill acids and such I would
look into these. Blow your own containers and attach the joints, anneal then use.
A question that sometimes drives me hazy: am I or are the others crazy?
Albert Einstein
|
|
|
dorkwad
Harmless
Posts: 17
Registered: 23-1-2014
Member Is Offline
Mood: No Mood
|
|
Thanks so much PeeWee2000, i had looked a lot for these ebay listings but couldnt find them myself, this is the best possible thing for me to use,
really appreciate that!
Also thanks zenosx that's the plan, thanks everybody for helping me figure out this issue!
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
