Chill
Harmless
Posts: 34
Registered: 1-7-2013
Member Is Offline
Mood: No Mood
|
|
Sodium and Potassium Hydroxide
I know that NaOH and KOH are sometimes interchangeable in reactions, but are there any reasons why I would need one or the other (or both)?
I ask because I'm about to purchase some, and I'm wondering if I should just get NaOH because it's a tad bit cheaper, or shell out extra to get both.
I figure, if I can use NaOH in place of KOH for many situations, I should be fine with just NaOH.
Anyways, do you guys know of any reactions in which you would want KOH exclusively, or is NaOH so interchangeable that I will be fine for most (let's
say 9 out of 10) reactions. Any other opinions regarding the subject are also welcome.
Thank you
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
The only reactions in which you would specifically want KOH are reactions where you need a K+ ion - perhaps, like in the case of KNO3, it
is much less soluble than its Na+ equivalent.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
9 out of 10 times they are interchangeable. The sitatuations in which it makes a difference that I quickly think of:
1) Flame color (sodium imparts a very intense yellow color to flames that tends to overwhelm other colors)
2) Solubility, like elementcollector1 says, some sodium- and potassium salts have very different solubilities. For example potassium perchlorate is
only sparingly soluble (16.8 g/l at 20 deg C) in water whereas sodium perchlorate is very soluble (2000 g/l)
3) Hygroscopicity. Some sodium salts are very hygroscopic whereas the equivalent potassium salt is not (potassium and sodium perchlorate are again a
good example). I don't know of any examples of the reverse situation, but perhaps it occurs as well. It is not only a matter of convenience for
storage. It makes a difference, for example, when you try to accurately weigh an amount or in pyrotechnic mixtures, where moisture absorbtion is
undesirable.
4) In biological experiments (living cells and certain enzymes handle sodium and potassium very differently)
[Edited on 8-10-2013 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Another place where there is a difference is in situations where hydroxide is dissolved in methanol or ethanol instead of water. KOH can more easily
be dissolved than NaOH in these solvents. For certain organic experiments, hence KOH is preferred above NaOH.
If you confine yourself to aqueous chemistry, then in nearly all cases the two can be used equally well. If you are on a tight budget, then I would
say, first buy some NaOH and if at a later time you really need KOH for a specific experiment, then buy that at that time.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
