Jay
Harmless
Posts: 5
Registered: 13-7-2013
Member Is Offline
Mood: No Mood
|
|
Obtaining beginning glassware?
Hello fellow mad scientists!
I've been reading this forum for quite a while, (over the course of about two years) and I now have some questions of my own. I experiment all the time, having stockpiled some very sexy chemicals. However, my
hardware is limited to jam jars, candy thermometers, plastic cups, *slightly* damaged test tubes had from school, and many improvised apparatus.
In order to move on to more advanced/corrosive things, I'd like to obtain some basic glassware. I'm thinking flasks, beakers, graduated cyl, maybe a
sep funnel? Also would be nice to have a good quality mortar and pestle and most basic ring stand with few clamps. Right now I only do inorganic
chems, but I'd like to move on to organics once I get some serious experience. Could anyone reccomend a good supplier of glassware, perhaps a kit for
beginners? Cheaper, btw, is better. Money is a factor in this.
|
|
|
subsecret
Hazard to Others
Posts: 424
Registered: 8-6-2013
Location: NW SC, USA
Member Is Offline
Mood: Human Sadness - Julian Casablancas & the Voidz
|
|
E-Bay is a good source for cheap glassware. A lot of it is used, so be sure to clean it really well before using it. (It's hard to know what people
used it for, so cleaning is very important). E-Bay also offers lots of new glassware. Depending on the size of your hometown, you may be able to find
a science/education store. My local education store has loads of new Pyrex "Vista" glassware at really low prices (Beakers and such).
I recommend looking for an education supply store. What sort of inorganic experiments are you looking to do?
|
|
|
Jay
Harmless
Posts: 5
Registered: 13-7-2013
Member Is Offline
Mood: No Mood
|
|
I'll use eBay, but only as a last resort. The idea of hot acid bubbling in questionable glass is a bit unnerving. A ''local education store'' sounds
PERFECT! No shipping costs, things breaking, or waiting a week for your stuff. Orlando is pretty big. Do you remember any names, something to give me
a lead? As for experiments, I'd do just about anything. Grow cu sulphate crystals, prepare various chlorides, make halogens (I made iodine without any
glass, 10 grams), make chloroform, just for shits and giggles cuz I have no use for it right now. Eventually I'd like to distill and prepare acids,
make silver nitrate, fuck around with alkalis other than lithium. Endless fun to be had, things to learn.
|
|
|
skeletal-clown
Harmless
Posts: 30
Registered: 29-5-2013
Location: Australia
Member Is Offline
Mood: No Mood
|
|
If you don't mind ordering from overseas, I'd highly recommend Laboy. http://www.laboyglass.com/ They're really well priced, have $15 flat rate shipping worldwide, are decent quality and have really good customer
service. I ordered quite a lot of glass from them recently and it arrived in just over a week (Australia). The only thing that was damaged was my
Graham condenser which they replaced free of charge, let me keep the broken one and gave me a $10 discount on my next purchase. They've also got some
really nice looking sets. All in all, they're a pretty great company if you don't mind buying internationally.
|
|
|
Jay
Harmless
Posts: 5
Registered: 13-7-2013
Member Is Offline
Mood: No Mood
|
|
Thanks, I'll definitely be ordering some glass from laboy. I do have a few concerns however. Is it 15$ no matter how much crap you order, or is that
the base price that increases? I also couldn't find any beakers? I'll surely need them...
|
|
|
ElizabethGreene
Hazard to Others
Posts: 141
Registered: 15-10-2012
Member Is Offline
Mood: No Mood
|
|
I heartily recommend SM's Dr. Bob and Laboy. I've purchased from both and was quite happy.
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Doc Bob was able to set me up mightily well, and I owe my eternal thanks to him. Very, very cheap prices, and usually has what you need.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
skeletal-clown
Harmless
Posts: 30
Registered: 29-5-2013
Location: Australia
Member Is Offline
Mood: No Mood
|
|
@jay, The $15 shipping is flat rate. Whether you buy one flask or one hundred, it stays the same. Seeing as shipping to Australia is normally so much,
that's half of why I bought from them ;D You're right though, they don't have a lot of the simple things like beakers, erlenmeyers, test tubes etc.
They mainly stock more complex items. As for the simple things, I usually get mine from an Australian company due to shipping costs, but if you're in
America, as everyone else has said, I've heard great things about Dr. Bob. Good luck!!
|
|
|
Vargouille
Hazard to Others
Posts: 380
Registered: 16-4-2012
Member Is Offline
Mood: No Mood
|
|
I've gotta give some love to Alchemy Lab Supply. They're a Canadian company, so shipping is a bit of a bother (not too bad to Florida), but the glassware is good and
inexpensive. I've got a Liebig from them, and it's held pretty well between water distillations and nitric acid distillations.
|
|
|
Manifest
Script Kiddie Asshole
Posts: 229
Registered: 7-12-2012
Member Is Offline
Mood: No Mood
|
|
You could extract caffeine with your chloroform
|
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
about chloroform
http://youtu.be/FDIx_TyPeeU?t=2m49s
this part seems very interesting to me, and i suppose i have decided i want to create a bit of high conce. NaClO to make some chloroform
very surprised and yet mad over how blind ive been when chlorines oxidative powers have been mentioned, now have the most beatiful red brown solution
of iodine standing 
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Jay,
I don;t have as much varety of glassware left now, but I do still have lots of basic glassware and some organic stuff, so if you are interested, send
me a message (click on my name and pick u2u) with let me know what you are looking for, or go to the finding a home for glassware thread and look at
the spreadsheet and photos there. I still have lots of erlenmeyers, grad cylinders, filtration flasks and funnels, and much more. Shipping within
the US is not too bad, and I charge real postage costs, so the overall shipping is still reasonable.
|
|
|
Jay
Harmless
Posts: 5
Registered: 13-7-2013
Member Is Offline
Mood: No Mood
|
|
I'm about to place an order with laboy, but I just have one more question.
Do these erlenmyers have ground glass joints, or are they the shitty smooth ones?
http://www.laboyglass.com/flask/single-neck-flask/flask-erle...
Okay, three questions. How do you heat a round bottom flask without a mantle?
Do sandbaths work for larger ones, like 500&1000 ml RBF's?
|
|
|
Blue Matter
Hazard to Others
Posts: 107
Registered: 20-6-2013
Location: US
Member Is Offline
Mood: Optimus
|
|
You can heat a round bottom flask easily and pretty well with a few different methods you have oil baths for med temp heat water baths for low temp
heat sand and steel bead baths for higher temp heating.
I did this a while ago but I went to Walmart and bought 3 cans of steal bbs and washed them very thoroughly and put them in a aluminum pot, this
method works almost the best in my opinion sand is also good but its kind of messy.
I know a lot of people praise laboy and they do have some nice things at low prices but I personally would rather spend some time on ebay and look for
pyrex or kimax brand items if you get lucky and look in the right places you can get them around the price of laboy if not better.
|
|
|
skeletal-clown
Harmless
Posts: 30
Registered: 29-5-2013
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Yep, those Erlenmeyers are ground glass jointed as far as I know. At the least, they have standard taper joints, which should be good enough for
almost any application. As far as the heating of large RBFs goes, I usually use a sand bath on a portable hot plate (In don't have a proper laboratory
hot plate/stirrer yet), but yeah, I've heard good things about oil baths, water baths are great for low-temperature heating (ethers and alcohols), and
I've heard of many people using steel ball baths (although, if you can get them, copper seem much better).
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
