| Pages:
1
2 |
I Like Dots
Hazard to Self
Posts: 69
Registered: 10-4-2013
Member Is Offline
Mood: frisky
|
|
3D print lab supplies?
I have access to a nice 3D printer, Im wondering if anyone has 3D models of keck clips.
I checked the few databases, and nothing turned up. I have solidworks but it may take awhile to learn.
If anybody had a model that would be cool!
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
uhhhh this might not be a good idea. the strength of standard keck clips isn't to high to begin with. And , near as I can tell, those are injection
molded. with a printed clip you form the part by layering& I can't say that the layering won't affect how stress is distributed. In short this
could lead to brittle inflexible clips with the ,IMO, failure points being the "arms" that join the bottom ring from the top ring. what file type
could you use for the model? But I could be very wrong and I apologise if my doubts are disheartening.
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
Variscite
Hazard to Self
Posts: 69
Registered: 21-5-2013
Member Is Offline
Mood: diffusing
|
|
I think this might actually work, that would be very convenient if it did. I dont think because they are 3d printied that it would reduce the
structural stability. It depends on what plastic it is being printed in too, although im not sure what 3d printers print in...
|
|
|
mud
Harmless
Posts: 10
Registered: 10-5-2013
Member Is Offline
Mood: No Mood
|
|
oooh oohh I need some things printed, but in a filament that comes close to GL 45 specs.
|
|
|
BCNOFNe
Harmless
Posts: 5
Registered: 15-5-2013
Location: Tennessee
Member Is Offline
Mood: No Mood
|
|
I think the current printers use ABS plastic and I think it could work if you printed it like a "U" meaning the bent edge on the surface of the
printer and print little feet so that it stands up.
If they can print a Robohand http://youtu.be/WT3772yhr0o you should have a chance at clips lol
|
|
|
confused
Hazard to Others
Posts: 244
Registered: 17-3-2013
Location: Singapore
Member Is Offline
Mood: tired
|
|
ABS can hold up to hydrochloric acid pretty well, but is attacked by sulfuric and nitric acids
also ABS softens at about 90 'C and melts at 105'C, so it wouldn't be good to use it for any setups that involve heat such as distillation setups
[Edited on 13-6-2013 by confused]
|
|
|
argyrium
Hazard to Others
Posts: 123
Registered: 3-2-2008
Location: Pacific
Member Is Offline
Mood: No Mood
|
|
think big...
Navy Wants Aircraft Carriers to Manufacture Weapons On the Go
These days, the mention of 3D-printed weapons conjures up visions of people printing AK-47s in their garages (ok, that might just be me). But a recent
story in the Armed Forces Journal brings word of a more systematic implementation of 3D-printed warfare.
According to one Lieutenant Commander Michael Llenza, the Navy's future lies in converting aircraft carriers into “floating factories,” each
carrying a fleet of 3D printers to churn out weapons, drones, and even shelters at a moment’s notice. There’s money and time to be saved in the
sheer logistical rationality of the scheme. For example, when cylindrical bullets are stacked, tiny bits of wasted space are created—which add up,
when you're talking about millions of the things. Rectangular packages of powder, which could be printed into bullets when needed, are a far more
efficient use of space.
Right now, research on such a scheme is being done in bits and pieces. Llenza points out a handful of examples, including Contour Crafting, the
building-sized 3D printing system, as well as several recent projects in which complete UAVs were produced overnight:
[…] The University of Virginia printed a UAV controlled by a relatively cheap Android phone whose camera was used to shoot aerial imagery. Designed
for a top speed of 45 mph, the aircraft crashed on its first flight. The students just went back to the lab and printed out a replacement nose cone, a
capability envied by any squadron maintenance officer. The eventual goal is a drone that flies right out of the printer with electronics and motive
power already in place. An organic ability to print replaceable drones from ships, forward operating bases or during disaster relief operations to
serve as targets or observation platforms could be a huge enabler for sailors and Marines.
Of course, there are still huge gaps to be bridged, technologically speaking, before 3D printing can be adopted as a large-scale military inventory
strategy. It’s supremely expensive right now, and more importantly, the structural stability of many materials is inconsistent—so replacing
critical pieces of machinery is out of the question. Still, it’s an exciting idea, especially when you see it in the terms laid out by MIT’s Neil
Gershenfeld, who describes the 3D printing as the ability to “turn data into things and things into data.” Llenza sums it up nicely by wondering
how much simpler Apollo 13's mission would have been, had the crew been able to simply request the appropriate CAD model from ground control. [Armed
Forces Journal via ExtremeTech]
A rendering of the Contour Crafting system, the University of Southern California program that's developed a technology to print at an architectural
scale.
|
|
|
paw_20
Harmless
Posts: 32
Registered: 14-8-2012
Location: United States
Member Is Offline
Mood: Curious
|
|
I got extremely (perhaps inordinately) excited over the AFM imaging of a graphene reaction (article's in Science, if you haven't seen it), but this is
right up there in terms of "coolest things I've seen all year." Mostly because of the guy in comments who compared it to a Protoss Carrier.
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Plastics as they are now are just not goog enough for chemistry.
I dont think we will soon see a change here, but what we will see is the use of other materials in 3d printers...
Who builds the first sol-gel printer with instant silent discharge curing to print us things from real glass?
/ORG
[Edited on 15-6-2013 by Organikum]
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
I just finished CADing a 14/20 keck clip and uploaded to thingiverse:
http://www.thingiverse.com/thing:274395
Haven't really tested it besides repeatedly clipping it onto a joint.
I wonder if it'd be cheaper to send the .stl to shapeways and have them print it (maybe in alumide) than to buy the OEM Keck clips
|
|
|
BromicAcid
International Hazard
Posts: 3245
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I have seen ceramic printers, now we just need to wait for printers using borosilicate to take off. Imagine being able to print a needle valve or
joint adapter?
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Now imagine a quartz printer.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
Finished a 24/40 clip:
http://www.thingiverse.com/thing:274563
These printed clips actually seem to hold joints together pretty damn tight. When cold, at least. I'll see how well it holds up when boiling water.
|
|
|
Blergo
Harmless
Posts: 3
Registered: 18-3-2014
Location: United Kingdom
Member Is Offline
Mood: No Mood
|
|
I will try and print some of the 14/20 clips tonight and see how they go, i was just about to order some more. Thanks for uploading the files!
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
Any chance of a pictur of the clip you printed?
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
19/22 Keck clip is done:
http://www.thingiverse.com/thing:275257
14/20, 19/22, and 24/40 are the only Keck clips I have. If someone has a different size keck clip they want modeled and have a pair of calibers, post
the inner diameter of both crescent pieces and the distance between them, in imperial units please.
Quote: Originally posted by Blergo  | | I will try and print some of the 14/20 clips tonight and see how they go, i was just about to order some more. Thanks for uploading the files!
|
Cheers. Post your print parameters and type of filament you're using. I was having mild delamination issues when printing the 14/20 clip in black ABS
@ 250C. I switched to the white ABS that came with my Afinia printer and printed at 260C and the keck clip came out much better.
If you're asking me, pics are included in each of the thingiverse links I posted.
Here's a full set of pics (printed clips compared to stock Keck clips):
[Edited on 3-19-2014 by MyNameIsUnnecessarilyLong]
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
I made alternative keck clips that have eyelets for inserting safety wires. Now if your clip breaks, it hopefully won't take your expensive glassware
with it and fuck up your day.
http://www.thingiverse.com/thing:275336
I've only printed the 14/20 clip for now.
|
|
|
Mr_Magnesium
Hazard to Self
Posts: 60
Registered: 4-8-2013
Location: \rooted/
Member Is Offline
Mood: No Mood
|
|
They look really good!
How long do they take to print? What made you get into 3D printing and how does someone like myself get into it?
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Mr_Magnesium | They look really good!
How long do they take to print? What made you get into 3D printing and how does someone like myself get into it? |
23 minutes for the small, 40 minutes, and 47 minutes for the larger one. That's on the slowest speed and solid infill to make for a stronger clip. On
fast speed and 75% infill it would probably take about 10, 20, 25 minutes respectively. Then it takes about 1 minute in labor to remove the plastic
support material from the printed part.
I first got into 3D printing about 6 months ago for product prototyping work. What also really appealed to me was that it's possible to design things
and print them in PLA (or even wax filament) and then do metal casting with them using the lost-wax casting method, which I still have yet to attempt.
My first project for that will probably be casting a brass magwell and yoke for a 1/3rd scale .22cal gatling gun based on the D&E plans.
Personal printers have come down in recent years to about the same price as a decent laptop, but if you don't know CAD and you're only interested in
printing complete products or a few parts here and there, then it might not be too economical for you since 3D libraries right now are still quite
limited, and by the time they become populated the personal printers will have become even cheaper and better. But if you happen to come up with a
good marketable product idea and want to start making prototypes for it, a personal 3D printer will likely save you time and money in the end. If you
haven't learned CAD, in my opinion, one semester is all you'll really need in order to know how to design mechanical models. Learning to do mesh
modeling for complex, artistic, undulating designs might take a little longer. There's also in-depth CAD courses now available on youtube. Autocad has
an inbuilt export to .stl function, so as soon as you're done modeling you can export and start printing it immediately.
If money is not much of an issue, a 3D printer becomes a matter of convenience; to create or make parts on demand rather than going to a store or
waiting for a shipment to arrive.
[Edited on 3-19-2014 by MyNameIsUnnecessarilyLong]
|
|
|
Oopsy_daisy
Harmless
Posts: 15
Registered: 24-6-2013
Location: Sweden
Member Is Offline
Mood: No Mood
|
|
This subject is something i find very interesting and I'm actually in the process of building my very own Reprap. One project I've planned is
designing a centrufugal fan, printing it and attaching a 120 W motor to it. This will then be used in a future fumehood. Hopefully the ABS will be
resistant enough to hold up to the corrosive fumes.
Some might say that it's cheaper just to buy one of ebay but the cheapest fans that I have found are still pretty expensive (~60£) with shipping to
Sweden. A printed fan will be a lot cheaper with a motor from a mixer or similar plus the plastic coming in at about 20 £ at the most.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
This is amazing work, MyNameIsUnnecessarilyLong! I would not have expected printed keck clips to hold up very well, considering the
spotty history of the "real thing". The safety wire eyelets were a good idea - do you just thread a wire through two of the vertically-aligned holes
and tie it together?
I have a friend with a 3D printer that I sent these specs to - I might have him print me some if I break the ones I have!
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by MrHomeScientist | This is amazing work, MyNameIsUnnecessarilyLong! I would not have expected printed keck clips to hold up very well, considering the
spotty history of the "real thing". The safety wire eyelets were a good idea - do you just thread a wire through two of the vertically-aligned holes
and tie it together?
I have a friend with a 3D printer that I sent these specs to - I might have him print me some if I break the ones I have! |
I was just as surprised as you were. The first 14/20 I made had a thinner section on the loop's radius, more like a real keck, and it separated as
soon as I clipped it to a joint. I beefed the loops up and now the clips work like a charm. I think there's more room yet on the top and bottom of the
loops to make them even sturdier and hold joints together tighter. But maybe it shouldn't be so tight as to stop joints from unlocking and venting in
case a system becomes over-pressurized?
Yes, thread wire through the top and bottom holes. I don't know if the two sets are really needed but it couldn't hurt. The idea is that if all the
suspension/spring loops sever, it will stop glassware from falling out of the taper. So, the connecting wire should be short enough to where, if the
keck clip does separate, the bottom glass piece won't fall far enough to escape the taper, because if it did I think that glass piece might
potentially become canted at an angle that would permit it to escape through the keck clip's entrance, and fall. Or spill contents.
Safety pins work even better:
[Edited on 3-20-2014 by MyNameIsUnnecessarilyLong]
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Oopsy_daisy | | One project I've planned is designing a centrufugal fan, printing it and attaching a 120 W motor to it. This will then be used in a future fumehood.
Hopefully the ABS will be resistant enough to hold up to the corrosive fumes. |
There is actually nylon and HDPE filament now available. Either of those would be a better choice for a fume hood fan.
I haven't tried printing in those plastics yet, but I hear it's a bit finicky to print with nylon until you find the sweet spot in temp and speed for
your particular setup. You'd also need to get a phenolic platen for the nylon to stick well enough to.
|
|
|
Mr_Magnesium
Hazard to Self
Posts: 60
Registered: 4-8-2013
Location: \rooted/
Member Is Offline
Mood: No Mood
|
|
I may take a look into this, my professor brought up 3D printing a while ago.
Is it possible in the future to print glassware pieces? beakers etc,
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I wouldn't trust any 3D printed glassware.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
