RobertRobinson75
Harmless
Posts: 10
Registered: 8-5-2013
Member Is Offline
Mood: No Mood
|
|
Australia: Where to buy, or how to produce, aluminium oxide?
I need some Al2O3 for an oxidation, however I can't seem to find a source available to me for it here.
Is there a relatively easy method of production, or an OTC source for this compound that I'm failing to find?
Any help would be much appreciated.
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Some hardware/paint stores will sell it as an abrasive or paint pigment. It is really quite stable, not sure how to use it as an oxidant, since it
is already at a happy oxidation state.
Or just burn aluminum in air, that will make lots of Alumina. But if you can oxidize things with it, I will be very impressed.
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Check a ceramics supplier.
It is not normally used as an oxidiser. It would only oxidise very strong reductors such as alkali metals, but those are readily oxidised by exposure
to air. Are you sure you are looking for the right thing? The fact that you need to ask where/how to get such an easily available chemical suggests
you are relative inexperienced in this field.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
you could also try NaOH or HCl + Al
the AlCl(3?) and then you should be able to decompose it into Al(OH)2
the NaOH + Al would make some more complex salt which could possibly be decomposed into Al(OH)2 or Al2O3 anyways
AlCl3 + NaHCO3 > NaCl + Al(OH)2
aluminium carbonate spontaneously decomposes so its possibly it could go straight into Al2O3 instead of Al(OH)2
|
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
You should figure out what form of alumina you need and then proceed. It is relatively easy to make a sludge of finely divided Al(OH)3 using aluminum
and aqueous base, and that can be dehydrated to Al2O3 powder. But if you need something like activated alumina, or particles of a particular size,
then you might have to order it.
The less you bet, the more you lose when you win.
|
|
|
DrSchnufflez
Hazard to Others
Posts: 114
Registered: 22-1-2013
Location: Australia
Member Is Offline
Mood: No Mood
|
|
I know that you can buy aluminium hydroxide in Australia. You just need to look.
And an oxidation with alumina? That is interesting in itself. 
|
|
|
RobertRobinson75
Harmless
Posts: 10
Registered: 8-5-2013
Member Is Offline
Mood: No Mood
|
|
Thanks for the suggestions, I did finally find a local supplier. I think when I posted this thread it just wasn't my day for locating who could supply
it where I live, the posts here helped out though.
To clarify, Al2O3 can be used as a catalyst for oxidation reactions; see this paper here for details. PDF warning on that link, for those concerned.
Al2O3 can also be used in a mix with KMnO4 and copper sulfate pentahydrate for another solvent free reduction, I believe the paper for that can be
found on the Rhodium archives somewhere.
|
|
|
zed
International Hazard
Posts: 2283
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Common lapidary supply. Try your local rock shop.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
