binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Please review my Laboy order
Hello all. I'm pretty new to all this and having a great time. I want start building a distillation apparatus and I've heard great things about
Laboy/synthware glass.
Please review my Laboy order here and recommend any changes or additions. I do not have any stands right now, but I plan to buy some steel rods in a
hardware store and set them up securely to use the clamps with. My main goal is to distill nitric acid as it is impossible to find here in Ontario.
HERE is the link to the organic chemistry set: http://www.laboyglass.com/organic-chemistry-kit
Thanks alot!
[Edited on 1-5-2013 by binaryclock]
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
Finnnicus
Hazard to Others
Posts: 342
Registered: 22-3-2013
Member Is Offline
|
|
Looks pretty sweet. If only my dad was as cool as you... Why do you need tubing? You can pick that up easy, no need for online shopping.
|
|
|
Mixell
Hazard to Others
Posts: 449
Registered: 27-12-2010
Member Is Offline
Mood: No Mood
|
|
Looks fine to me, I would suggest to get some joint clamps in there too.
|
|
|
confused
Hazard to Others
Posts: 244
Registered: 17-3-2013
Location: Singapore
Member Is Offline
Mood: tired
|
|
keck clips?
|
|
|
hafnium
Harmless
Posts: 19
Registered: 5-4-2013
Member Is Offline
Mood: No Mood
|
|
Not bad, looks like you've got the basics covered. If you don't want to deal with Laboy's long shipping times though (Laboy's based out of China,
right?) there's an ebay seller from the states selling the exact same glassware for very similar prices (it's been established on this forum that
synthware and laboy are one in the same, just rebranded). Here's his seller page: (http://myworld.ebay.com/cbb-syt?_trksid=p2047675.l2559)
I'm guessing you'll be wanting a heating apparatus of some sort and additional beakers/graduated cylinders, all of which can be bought very cheaply on
ebay. With a little patience, independent stores of even Laboy's quality won't normally be able to beat out the deals you can find on auctioned ebay
items. I do, however, understand why you're going through Laboy in this situation, as their deals on glassware are VERY hard to beat.
What's with that tubing listing? I can't find where it lists the length in meters/feet. (That type of tubing isn't ideal for vacuum setups either, so
keep that in mind.) I'm also not a huge fan of cork stands (never had a real use for them), but those are very cheap, so I'm not going to bother
arguing.
[Edited on 1-5-2013 by hafnium]
|
|
|
hafnium
Harmless
Posts: 19
Registered: 5-4-2013
Member Is Offline
Mood: No Mood
|
|
Yeah, I agree. Pick up a few of those; they're a nice supplement to your clamps and they're stupid cheap.
To be honest, he's likely missing a lot of things he'll want to acquire, but you really shouldn't be going to LabBoy expecting to buy non-glassware
items anyway. Depending on the length of that tubing though, those are actually pretty reasonable prices.
[Edited on 1-5-2013 by hafnium]
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
OK word of advice: on your thermometer check to see if it is a jointed or plain stem one. for Nitric acid I'd recommend , and assuming you can bear
the little extra cost, to look into a jointed thermometer and this part http://www.laboyglass.com/adapter/distillation-adapter/disti... you will need a 76mm immersion thermometer for it but here http://www.laboyglass.com/clamps-and-accessories/others/ther... this will allow you to both distill nitric acid and distill under a vacuum. You
can try distilling under a vacuum with the organic kit's inlet.thermometer adapter but that adapter uses a screw top fitting and relies on a o ring
to hold the thermometer. order spare o rings if you go that route and don't let the thermometer fall. If possible email Laboy and ask them what o ring
size & serial number they use for their inlet/thermometer adapters. I'd ask them, assuming you choose to go with a jointed thermometer, about the
top joint on the distillation adapter for ground jointed thermometers, the ideal thing would be for the adapter's top joint to have the same size as
the jointed thermometer you'll use in it. Pardon the wall of text but this is merely my opinion. EDIT: you will need a boss head for the three pronged
clamp. and bear in mind the tubing is sold by the meter.
[Edited on 1-5-2013 by Funkerman23]
[Edited on 1-5-2013 by Funkerman23]
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Thanks for all the suggestions.
I'm going to review the order with all your suggestions which were great! I do have a hotplate thanks to the generosity of one of the members here.
I checked with the bay seller and since he's in the US and I'm in Canada, there is a $25 shipping cost. And anything that goes over the border takes
along time because customs always holds it up so I'm not sure that will save time or money really.
Very interesting thoughts about the thermometer. See this is the stuff I would have no idea about until I got it all setup. Thanks!
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
zenosx
Hazard to Others
Posts: 188
Registered: 7-7-2012
Location: East TN / Near Oak Ridge
Member Is Offline
Mood: Awaiting Results....
|
|
One Note I will make is that the tubing quantity usually is per foot so 1 qty is equal to 1 foot and you will certainly need more than that for your
cooling apparatus. I'm not 100% on that but I would make sure. All of the other suggestions are spot on.
A question that sometimes drives me hazy: am I or are the others crazy?
Albert Einstein
|
|
|
paw_20
Harmless
Posts: 32
Registered: 14-8-2012
Location: United States
Member Is Offline
Mood: Curious
|
|
Definitely take into account funkerman's suggestion on the thermometer, eliminates worrying about nitric eating the o-ring/screw cap holding your
thermometer in place. Laboy also sells ptfe o-rings on that accessory-others page, if you decide to forgo the jointed therm.
Also you need a bosshead clamp to go with those 3 finger clamps. I prefer the bosshead/3-finger for everything except sep funnels and burets.
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Thanks for all your suggestions. I ended up getting the Advanced Chemistry 24/40 glassware kit: http://www.laboyglass.com/advanced-chemistry-lab-glassware-k...
That included the jointed thermometer joint, and I ended up getting the jointed thermometer.
My order is the follows:
x1 Advanced chemistry lab glassware kit 24/40 HMK02
x1 Thermometer with 10/18 joint 76mm immersion length temp range -20 to 250°C
x5 Plastic clip for 24/40 standard taper joint $1.22
x3 Open ring retort support with bosshead 60mm in diameter
x2 Open ring retort support with bosshead 100mm in diameter
x3 Three finger double adjust swivel clamp accept objects from 0-70mm
x2 Alloy two prong swivel clamp for items from 12 to 45 mm
x3 Spatulas 150mm in length
Total order was $438.15
I'll get the tubing locally, along with the pump.
Thanks!
[Edited on 9-5-2013 by binaryclock]
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
uhhh forgive my comment here but you may find that the advanced kit you mentioned does not supply the distillation adapter that uses the jointed
thermometer. the one with the thermometer top in that kit uses a standard non jointed thermometer... Now plain thermometers are not hard to come by
but if you order from Laboy again in the future you may want to note that only adapter HMA017101 can use the jointed thermometer directly. without
that you'd have to use this reducing adapter HMA010103 to use the ground joint thermometer securely. Still, I wish you all the best with your new
glass and may it give you many years of good service.
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Isn't the 2nd row, 2nd from the left the adapter to use the jointed thermometer?
If not, I'll jsut call them and have my order modified to include it.
[Edited on 9-5-2013 by binaryclock]
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
No that one is this adapter http://www.ebay.com/itm/Thermometer-adapter-three-way-24-40-... To use the 10/18 thermometer securely you will nead this adapter : http://www.ebay.com/itm/Thermometer-adapter-three-way-vigreu... . Or if you need the serial number for the distillation adapter that uses the
ground jointed thermometer HMA017101 . But I am not trying to force your hand and I offer my apologies if that is what this appears to be. I merely
wanted to make sure you didn't get your package only to find you can't use it or there are issues. Quote: Originally posted by binaryclock  |
Isn't the 2nd row, 2nd from the left the adapter to use the jointed thermometer?
If not, I'll jsut call them and have my order modified to include it.
[Edited on 9-5-2013 by binaryclock] |
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
No force of hand at all  Thank you so much. They need some more detail on their
pages so it correctly identifies certain pieces of glass. I'll email them and make sure they add the adapter to my order as I want to make sure I get
all the correct things in one shot.
Much appreciated!
[Edited on 9-5-2013 by binaryclock]
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
BobD1001
Hazard to Others
Posts: 182
Registered: 29-3-2013
Member Is Offline
Mood: No Mood
|
|
I really think you'll be pleased with the Laboy order. I emailed them just after placing my order a few months ago asking if I could add additional
Keck clamps, and they could just paypal invoice me the additional cost. I never received a response and was a little displeased.... until I received
my package, and they were in there free of charge! That's the kind of customer service we could all use more of!
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
I emailed them and they sent me the invoice for the additional $16 and I paid it. No hassles. Looks like everything is a go now
Thanks all. Can't wait until I get my glass now.
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
