mycotheologist
Hazard to Others
Posts: 154
Registered: 16-3-2012
Member Is Offline
Mood: No Mood
|
|
Breaking surfactants in OTC products
I was experimenting with various methods of making chloroform a while ago and I tried using household bleach that I got at the supermarket and I could
definitely smell chloroform but it didn't separate into 2 layers. When I poured the bleach into the beaker, some suds formed so I knew there was a
surfactant in there. There is around 50mL of water for every mL of chloroform so distilling would be too impractical. I tried adding loads of NaCl in
order to saturate the water and thus, force the chloroform out of the aqueous phase but it didn't work, it didn't separate into 2 layers like I
thought it would. Any other tricks I should know about?
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
Firstly, don't use 'thick' or 'toilet' bleach, both of which create a mess.
Secondly, don't use brand name stuff, it's 'well expensive, like', use own brand thin bleach.
Thirdly, a large percentage of bleaches around Europe (if that's were you be) don't contain hypochlorite anymore; specifically to prevent the
formation of 'trihalomethanes'.
There isn't really an easy way to get rid of / round the surfactants, as they're added in quantities large enough to be effective when highly diluted.
| Quote: | | There is around 50mL of water for every mL of chloroform so distilling would be too impractical. |
This is where thinking outside the box, and inside a large paint / jerry can, may be of assistance. Although those surfactants may reappear as a lot
of foam, I've never tried distilling it from bleach before.
There are outlets (in the UK and around) that sell high percentage, surfactant free bleach.
Failing that, chlorine into sodium hydroxide solution, brew your own bleach minus the surfactant.
If the goal is inhaling the chloroform, it's definitely not worth the effort. You'll feel dizzy for about two minutes then tired for the rest of the
day.
[Edited on 22-6-2012 by peach]
|
|
|
mycotheologist
Hazard to Others
Posts: 154
Registered: 16-3-2012
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by peach  | | This is where thinking outside the box, and inside a large paint / jerry can, may be of assistance. Although those surfactants may reappear as a lot
of foam, I've never tried distilling it from bleach before. |
I like your thinking. I could cut a hole in the lid and fit it with a tube of some sort and use an ice bucket as a condenser. As for a heat source, I
could use a trick mushroom growers use to heat their incubators. Put the bucket inside a second bucket which has a fish tank heater submerged in
water. Only problem is they don't go above around 30C. I just came across this article:
http://pcbheaven.com/exppages/Removing_the_built-in_thermost...
which gets me thinking. With a bit of electronics know how, you could convert a fish tank heater into a portable, submersible heating element.
| Quote: Originally posted by peach |
If the goal is inhaling the chloroform, it's definitely not worth the effort. You'll feel dizzy for about two minutes then tired for the rest of the
day.
|
While I would probably try it if I had pure CHCl3, I wouldn't be too inclined to huff chloroform as its not the safest or healthiest substance to
ingest. If I was to choose a solvent to inhale, I'd go for diethyl ether. Back when they discovered chloroforms anaesthetic properties, they believed
it was safer and superior to ether and nitrous oxide and as a result, it was widely accepted by doctors and used as their primary tool for inducing
anaesthesia. Until patients began dying of heart attacks that is. I can't remember the name of it but theres a good documentary on the history of
anaesthetics. If I'm not mistaken, chloroforms anaesthetic properties were discovered by Humphrey Davey who inhaled every solvent he came across lol.
EDIT: Modifying an aquarium heater would probably be a pain in the ass. Something like this:
http://www.mwands.com/index.php?main_page=product_info&p...
would be better.
[Edited on 23-6-2012 by mycotheologist]
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
If you smell it why not distill it out?
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: | | While I would probably try it if I had pure CHCl3, I wouldn't be too inclined to huff chloroform as its not the safest or healthiest substance to
ingest. If I was to choose a solvent to inhale, I'd go for diethyl ether. Back when they discovered chloroforms anaesthetic properties, they believed
it was safer and superior to ether and nitrous oxide and as a result, it was widely accepted by doctors and used as their primary tool for inducing
anaesthesia. Until patients began dying of heart attacks that is. I can't remember the name of it but theres a good documentary on the history of
anaesthetics. If I'm not mistaken, chloroforms anaesthetic properties were discovered by Humphrey Davey who inhaled every solvent he came across lol.
|
Yup, one of the earlier examples of formal chemistry / pharmaceutical battles.
| Quote: | I particularly liked the example for cocaine, Fraud snorting it up whilst working, noticing his face going numb, passing it to his Dr mate, his mate
rubbing it a frog's eye and giving it a poke with a knife, then rubbing it in his own eye and giving that a jab. Good stuff... back to basics. 
I like your thinking. I could cut a hole in the lid and fit it with a tube of some sort and use an ice bucket as a condenser. As for a heat source, I
could use a trick mushroom growers use to heat their incubators. Put the bucket inside a second bucket which has a fish tank heater submerged in
water. Only problem is they don't go above around 30C. I just came across this article:
http://pcbheaven.com/exppages/Removing_the_built-in_thermost...
which gets me thinking. With a bit of electronics know how, you could convert a fish tank heater into a portable, submersible heating element.
|
Know of this trick do I, the bucket within a bucket. I have, in my past, worked at a mycology place. Whilst working there, I also converted a
practically new fridge someone had left hanging around to an incubator for plate work. Leave it unplugged, drop a fish tank heater into the salad bin,
pour in some water, add a squirt of bleach to keep it germ free, turn it on, leave. That'll keep it around where it needs to be. Simultaneously, I had
a big 210l drum hanging around and a bakery next door. I bought some sacks of sugar from the supplier (dirt cheap), tossed that in the drum with a
pack of turbo distillers yeast, another submersible heater, filled her up, stacked some packaging around the drum as insulation, ba-booom! That baby
was fizzing (literally) the next day.
In terms of distilling things from paint cans and so on, you can use either a hotplate (try the tip / dump to see if there's one hanging around for
free with the white goods) or (if you're careful) a camping stove.
Click this link to witness.
I used that can over and over and over and had to knock the solids out of it, and then roast it as high as the stove would go, to get the benzene out.
Scored about 2.5 or 3l from memory, about 125 to 250ml at a time.
I would knock the solids out and then inspect the can for signs of failure around the seam.
That fitting I have on the top of the can is called a tank connector, flanged tank connector, tank to 15mm connector or some variation on that. You'll
find them around the plumbing isle of any DIY store. They're about $3-5 in the US I'd guess.
All I had to do was drill a hole in the lid and screw the thing on, then tighten up the compression fittings to make that arm. Took about 15 minutes
sat out in the sun, nice...
|
|
|
mycotheologist
Hazard to Others
Posts: 154
Registered: 16-3-2012
Member Is Offline
Mood: No Mood
|
|
Thats a nice setup, thats way more sophisticated/less caveman like than what I had in mind. Also, I was thinking of one of those large plastic paint
buckets:
due to their large volume. They wouldn't be able to handle high temperatures but I doubt 60C for chloroform would cause any problems. Also the
chloroform would be too dilute to react with the plastic. There are probably large metal tubs like that though. I have a big 5 litre metal container
of toluene/xylene paint stripper, you could distill out of that. I've seen another one of your improvised setups before, your ingenuity impresses me.
|
|
|
Yo-Yo
Harmless
Posts: 26
Registered: 27-5-2012
Member Is Offline
Mood: No Mood
|
|
Perhaps it would be possible to freeze the chloroform out of the reaction mixture?I have done it in the lab after extractions of amphiphilic
compounds( although not detergents).
I took a PhD in neuropharmacology and all I got was this bloody t-shirt.
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
