rannyfash
Hazard to Others
Posts: 113
Registered: 21-2-2012
Member Is Offline
Mood: No Mood
|
|
bottling bromine
so, recently i have been messing with bromine (please be aware i haven't literally been messing around, all safety protocols have been in place), and
i wondered whether polypropylene is porous to br2 or whether it reacts with it, another option is to have a ground glass bottle but i wonder whether i
will need clip to hold the glass stopper in, http://www.bromaid.org/handbook/section1propertiesofbromine/... i was wondering what vapour pressure a glass bottle with silicone grease can
handle without leaking, i would prefer the latter alternetive as it looks more sciencey :3
|
|
|
rannyfash
Hazard to Others
Posts: 113
Registered: 21-2-2012
Member Is Offline
Mood: No Mood
|
|
needless to say the perfect way would be to put it in an ampoule but its one-time use and do not want to be dealing with high temperatures near a low
boiling toxic caustic liquid that could potentially cause very nasty burns
|
|
|
rannyfash
Hazard to Others
Posts: 113
Registered: 21-2-2012
Member Is Offline
Mood: No Mood
|
|
my lab store is outside and would never reach temperatures over 20 celcious
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=15452#...
Good luck!
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I have kept some in a roundbottom flask with ground stopper+clip for over 10 years now. The tempature fluctuates between -15 C (winter) and up to +30
(summer). The flask is in a larger closed container with an absorbent (bentonite), should it break or leak, but so far, no leaking seems to have
occured.
I once tried to open the flask, intending to transfer the bromine to another container, and found the stopper was stuck. I did not want to break the
flask and the bromine seems to be stored well for now so I decided to leave it with the stuck stopper untill someday I need to use the bromine.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
rannyfash
Hazard to Others
Posts: 113
Registered: 21-2-2012
Member Is Offline
Mood: No Mood
|
|
thanks for the link Mailinmypocket, i really need to start searching before i start a new thread, phlogiston ill probably go for a ground glass bottle
with a clip and a little lube, thanks
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
On Topic Old Threads
There's this old SM thread too:
http://www.sciencemadness.org/talk/viewthread.php?tid=5572
Chemistry is our Covalent Bond
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by rannyfash  | | so, recently i have been messing with bromine (please be aware i haven't literally been messing around, all safety protocols have been in place), and
i wondered whether polypropylene is porous to br2 or whether it reacts with it |
Bromine will react with the remaining unsaturated groups in polypropylene, which will both brominate the polymer and use up some of the bromine,
releasing HBr into it. Plastics are generally a very poor material to hold bromine. Glass bottles with teflon lined caps are best, red
fluoropolymer caps are best, like used on bottles of chlorosulfonic acid, thionyl chloride, and bromine. If you use a stopper, you will need to
grease it and be careful, as the glass can stick over time. A reagent bottle with a solid Teflon stopper might work, but bromine can diffuse through
Teflon over time as well.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
