vampirexevipex
Hazard to Self
Posts: 62
Registered: 22-2-2012
Location: Puerto Rico
Member Is Offline
Mood: Happy 
|
|
Production of chlorates?
I've been wondering how to produce chlorates, i saw in the internet that can be produce by electrolysis but, if i electrolyze the aqueous solution
(Iron Chloride), the chlorine gas may escape leaving only iron oxide and iron hydroxide. So my questions are: can you make iron chlorate from
electrolysis? does the cathode and anode must be made of a specific material? can i use graphite for the cathode and anode? Thank you.
[Edited on 22-02-12 by vampirexevipex]
|
|
|
Brominator
Harmless
Posts: 14
Registered: 21-2-2012
Location: United Kingdom
Member Is Offline
Mood: No Mood
|
|
You may have problems using electrolysis for the production of iron chlorate as iron hydroxide isn't soluble in water so the cl2 gas made at the anode
won't react to form the clo- very easily so chlorate production will be limited.
and yes to graphite electrodes will work for chlorate production but you will have to find a way of separating out fine carbon particles from you
product if it works.
|
|
|
vampirexevipex
Hazard to Self
Posts: 62
Registered: 22-2-2012
Location: Puerto Rico
Member Is Offline
Mood: Happy
|
|
Do i need to run it at a specific voltage?
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
Here is a great video of chlorate production from the cheap and available potassium chloride water softener/ salt substitute. Using a platinum coated
electrode. One of these can be obtained for around $80 USD and will run for ever practically with no noticeable corrosion or contamination. This guy
has a really nice set up.
http://www.youtube.com/watch?v=9FyGP-zSpZo
Of course if you are desperate for a little bit of chlorate you can try the thermal disassociation of NaClO to NaClO<sub>3</sub> and NaCl,
then a subsequent metathesis with KCl to yield KClO<sub>3</sub> by precipitation from solution, as seen here. This works fine and is tried
and true, but it is very inefficient.
http://www.youtube.com/watch?v=JtxQT7aVDeg
As far as voltage, amps, and temp...
UTFSE!
Try terms like "chlorate cell," "electrolosis cell," "making chlorate," etc.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
| Quote: | | Do i need to run it at a specific voltage? |
I used to run chlorate cells at 5 ─ 7V! A good median!
"I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones"
A Einstein
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i made quite a bit of potassium chlorate over the winter but i dont know if it is the purest i can make yet.some of the chlorate burns all black with
addition of sugar but another bigger batch leaves a white hard residue after burning. does the bigger batch still have alot of chloride in it that
needs to be converted to chlorate or is it common to leave this white crust behind?it burns very rigorous.
|
|
|
weiming1998
National Hazard
Posts: 616
Registered: 13-1-2012
Location: Western Australia
Member Is Offline
Mood: Amphoteric
|
|
Quote: Originally posted by cyanureeves  | | i made quite a bit of potassium chlorate over the winter but i dont know if it is the purest i can make yet.some of the chlorate burns all black with
addition of sugar but another bigger batch leaves a white hard residue after burning. does the bigger batch still have alot of chloride in it that
needs to be converted to chlorate or is it common to leave this white crust behind?it burns very rigorous. |
The white crust is KCl produced in the reaction. It is natural for a white crust to be left behind and you cannot make a mix that doesn't do that.
Does your potassium chlorate burn slowly with sugar, or rapidly in a pink flash of light? Because contaminated KClO3 isn't really an efficient
oxidizer and burns very slowly.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
it burns pretty quick and pink but i noticed that a smaller batch i made which i let go for weeks, started precipitating a different looking salt in
the center of both electrodes on top of the already precipitated chlorate.it did not look crystally like the rest of the chlorate but a bit curdlike
and was more bitter than salty tasting.this smaller batch salt burns way cleaner and faster in spite of it being less cleaner potassium chloride.by
cleaner i mean that the chloride was all mixed with a red clay looking stuff that i had to boil and cooled then recrystallized,it came in a three
pound bag.
|
|
|
weiming1998
National Hazard
Posts: 616
Registered: 13-1-2012
Location: Western Australia
Member Is Offline
Mood: Amphoteric
|
|
| Quote: Originally posted by cyanureeves | | it burns pretty quick and pink but i noticed that a smaller batch i made which i let go for weeks, started precipitating a different looking salt in
the center of both electrodes on top of the already precipitated chlorate.it did not look crystally like the rest of the chlorate but a bit curdlike
and was more bitter than salty tasting.this smaller batch salt burns way cleaner and faster in spite of it being less cleaner potassium chloride.by
cleaner i mean that the chloride was all mixed with a red clay looking stuff that i had to boil and cooled then recrystallized,it came in a three
pound bag. |
I would guess...Perchlorate formation? Because a perchlorate would oxidize the carbon more completely (increased oxygen:non oxygen ratio) and would
also leave less KCl (again more oxygen in the molecule). It is also less soluble than potassium chlorate.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
weiming1998 thanx .i will now think about doing the rest of my chlorate.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
