Unobtainium
Harmless
Posts: 3
Registered: 10-1-2012
Location: New York
Member Is Offline
Mood: Excited and Anxious
|
|
Setting up my first home lab
So I've always been very intrigued by chemistry, but for some reason I was never really too motivated to actually go and setup a lab at home, until
now. I've been reading through some textbooks, and plenty of other material on various websites and forums, and I've decided to spend a bit of money
so I can have some real fun with chemistry at home.
My budget isn't very big right now, it's around $600-800. I'm more interested in acquiring the glassware and other equipment right now and I'm not too
worried about the chemicals and what not at the moment.
For glassware, I've been looking at a number of different sites including eBay, Elemental Scientific, and a few others. One that caught my eye was this set, which seems to be really nicely priced. The only two things that I'm not sure about are
1. The quality, does anyone here have experience with this company?
2. The "Fractionation Tube", which I assume is supposed to the the fractionating column doesn't look that great, although I could be wrong, I don't
know a whole lot about glassware. But that's not a big deal anyway, I can always pick up a Vigreux column if I need one, I suppose.
Aside from the glassware itself, I'm also looking for a good heating/stirring plate, preferably for around $200 or less. Does anybody know of any good
ones in that price range? I've been looking at this and this, but I'm not really sure if they are good choices or not.
I'm also interested in a vacuum to use for vacuum distillation, and I've been eyeing this one which seems to be the same one that United Nuclear resells for like $300, so I'm guessing it isn't bad quality. Also, for vacuum
distillation, what type of tubing should I use for connecting the vacuum to the apparatus? Is regular vinyl or latex tubing fine? And do I need to use
a vacuum flask as a water trap?
Or maybe I could save some money on a vacuum and use an Aspirator instead? Would I still get good results with one of those?
What about support stands and clamps and what-not, any recommendations on those?
I think that covers most of my questions for now; I'd really appreciate any advice I can get. I've been browsing this forum quite a bit over the past
few days and there's definitely a lot of good information here, I'm really happy I found it.
[Edited on 1-11-2012 by Unobtainium]
|
|
|
Steve_hi
Hazard to Others
Posts: 196
Registered: 4-12-2010
Member Is Offline
Mood: No Mood
|
|
Check this set out at Ebay and it's less expensive
http://www.ebay.com/itm/New-Advanced-24-40-Organic-Chemistry...
|
|
|
Unobtainium
Harmless
Posts: 3
Registered: 10-1-2012
Location: New York
Member Is Offline
Mood: Excited and Anxious
|
|
Wow that's really cheap, but is the glass good quality? If so, then that's a great deal for sure.
[Edited on 1-11-2012 by Unobtainium]
|
|
|
White Yeti
National Hazard
Posts: 816
Registered: 20-7-2011
Location: Asperger's spectrum
Member Is Offline
Mood: delocalized
|
|
It seems like you didn't mention anything about a scale. If you want more information on where to get cheap and accurate scales, refer to this thread,
you might find it helpful:
http://www.sciencemadness.org/talk/viewthread.php?tid=17730
My biggest problems when I first set up my lab were finding a cheap and accurate scale and finding a way to heat reaction mixtures to 500+ degrees
centigrade. I still have a tough time performing high temperature syntheses, I have to set up a large wood fire in my chimney and jam the reaction
vessel into the hot coals and wait for hours, really time consuming, but it works, most of the time.
"Ja, Kalzium, das ist alles!" -Otto Loewi
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
U2U Dr. Bob on this site. I have gotten a load of good quality, ground glass ware, and a nice corning hotplate/stirrer. The prices are phenomenal. I
think he has a spread sheet of what's left in his thread "lab supplies looking for a good home". I can almost guarantee that you won't find better
prices or equipment anywhere else. Including eBay. Many longtime members here will vouch for him.
http://www.sciencemadness.org/talk/viewthread.php?tid=15667#...
[Edited on 12-1-2012 by Bot0nist]
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
entropy51
Gone, but not forgotten
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
That's a snazzy lookiing kit, but apparently it's made in China so the glass is what? Bomex? I would be cautious.
I've bought lots of glass from United Glass Technology and have had zero problems with it. Their kits are not as fancy as the one on eBay, but I
would wager that the glass is higher quality. http://unitedglasstech.com/lab__kits.htm
For stirring hotplates you can't beat Corning, but they don't come cheap.
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
I just got a corning pc-320 stirplate in great condition for 100$ USD +shipping. Claims 500C, I'll put that to the test tonight.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Unobtainium
Harmless
Posts: 3
Registered: 10-1-2012
Location: New York
Member Is Offline
Mood: Excited and Anxious
|
|
Quote: Originally posted by White Yeti  | It seems like you didn't mention anything about a scale. If you want more information on where to get cheap and accurate scales, refer to this thread,
you might find it helpful:
http://www.sciencemadness.org/talk/viewthread.php?tid=17730
My biggest problems when I first set up my lab were finding a cheap and accurate scale and finding a way to heat reaction mixtures to 500+ degrees
centigrade. I still have a tough time performing high temperature syntheses, I have to set up a large wood fire in my chimney and jam the reaction
vessel into the hot coals and wait for hours, really time consuming, but it works, most of the time. |
Actually, the reason why I didn't ask about a scale was because I saw that thread beforehand and figured it had all the information on scales I'd need
Also, Dr. Bob did indeed contact me, and I'm considering him as one of my options right now, he seems to have great prices, and I don't mind used
stuff, so long as it works.
As per heat/stirplates, I think I'm gonna keep an eye out for someone selling a used corning at a good price, it would probably be better in the long
run than one of those cheap Chinese alternatives.
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
I got a corning from Dr. Bob, as I said. For a great price.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
zoombafu
Hazard to Others
Posts: 255
Registered: 21-11-2011
Location: U.S.
Member Is Offline
Mood: sciencey
|
|
I would recommend getting your magnetic stirring plate from ebay. If you keep watch you should be able to find one for 50-100 dollars. I also
recommend buying a water aspirator, they are much cheaper, and will most likely serve the purpose for anything you wish to do. I just bought This glassware kit. It is very good quality especially for the price.
|
|
|
Chemstudent
Harmless
Posts: 44
Registered: 3-3-2012
Location: Sunny Florida
Member Is Offline
Mood: Contemplative
|
|
I too am going to add some considerable glassware to my lab setup. I am very likely going to purchase all my pieces from "Laboy" on ebay. I'm never
too sure about oriental goods, especially when the freight cost and prices are so low but folks on here seem to speak highly and their pieces look
well made. Are there any drawbacks to buying from these guys? Is their glass any better or worse than Corning which is priced way higher. I realize
certain boroscilicates are patented and of varying quality.
I just returned a 500mL simple distillation kit I bought on amazon.com for $99.99 http://www.amazon.com/MHB-LB120-500KA-Distillation-Apparatus...
I bought it before even having ever looked outside Amazon, and at the time I wasn't too keen on the different types of distillation methods. The still
head was affixed to the 500mL rbFlask and was pointed down 90degrees forcing me to raise up the flask a foot off the ground. It just was a terribly
awkward and limited setup overall. Then after seeing all the beautiful glassware I can get on eBay I felt huge buyers remorse. That $99 bucks is now
going towards a nice organic chemistry glassware kit.
Now that I have a better idea of what I want, I feel more comfortable now putting more serious coin towards some glassware. I wanted to get everything
I think I'd ever need for a very long time. Assuming I buy from Laboy I thought I'd get:
Organic Chem Kit -
http://www.ebay.com/itm/New-advanced-chemistry-lab-glassware...
A soxhlet extractor -
http://www.ebay.com/itm/New-glass-soxhlet-extractor-set55-50...
A buchner funnel -
http://www.ebay.com/itm/Buchner-funnel-filter-60ml-C-Coarse-...
And finally a Dropping Funnel -
http://www.ebay.com/itm/500ml-additonal-funnel-24-40-pressur...
That seems like everything I'd ever need as far as glassware is concerned. I would also need a water aspirator for vacuuming, but they didn't seem to
have one. All I have on hand is some Erlenmeyer flasks from Karter Scientific, and 2 evap. dishes from Pyrex. Does anyone think that there is a piece
of glassware not here that is missing, something very frequently used, is this maybe overkill? I felt I need a dropping funnel and soxhlet as they'd
become very useful. In the kit would I ever need the Vigreaux? Seems not useful since there are other condensors I could use for reflux, plus the
Vigreaux is just air cooled.
A lot of questions and rambling, sorry guys. But I hope when I do buy everything I will be happy and can get to work on some more difficult synthesis
|
|
|
Aperturescience27
Harmless
Posts: 39
Registered: 5-4-2012
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Chemstudent |
In the kit would I ever need the Vigreaux? Seems not useful since there are other condensors I could use for reflux, plus the Vigreaux is just air
cooled.
|
(I apologize if that was just a typo but) Vigreux condenser is meant to be used as a fractionating column, not for reflux, so you actually don't want
to cool it.
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Aperturescience27 |
(I apologize if that was just a typo but) Vigreux condenser is meant to be used as a fractionating column, not for reflux, so you actually don't want
to cool it. |
Chemists use Vigreux columns frequently as an air cooled reflux condenser. They don't require water, so there is little danger of having the hose
come loose overnight, and they have lots of surface area, so they work excellently as a reflux condenser for solvents like ethanol, DMF, 1,4-dioxane,
toluene, etc. I use them all of the time, as they are great for that purpose. They may not have been meant for that, but they work great for that
purpose.
Bob
|
|
|
sargent1015
Hazard to Others
Posts: 315
Registered: 30-4-2012
Location: WI
Member Is Offline
Mood: Relaxed
|
|
I would definitely buy a Vigreaux, since the increased surface area allows for fantastic fractional distillation, if you are into that. Also, I am not
sure if you need to get that fancy of an addition funnel. Don't get me wrong, I think those are great and I use it quite frequently! But, they are
very expensive and can be somewhat fragile as well. Personally, I would use something more like this:
http://www.ebay.com/itm/2-Pyrex-125-ML-glass-separatory-Funn...
But if you need the pressure equalizing capabilities of the Laboy one, go for it! Just be careful.
Also, @Dr.Bob, I will most certainly try that out as a reflux condenser. Interesting how I have never thought of that lol. Thanks!
|
|
|
SWilkin676
Hazard to Self
Posts: 68
Registered: 3-2-2010
Member Is Offline
Mood: No Mood
|
|
Don't know if you have considered vacuum source - keep an eye out on ebay for a Savant Gel Pump. Very reliable easy to use and maintain vacuum
source. Max vacuum is 7 torr which is plenty for most apps. I got both mine for less than 50 bucks, but you have to keep an eye out.
Also don't underestimate the need for little stuff. Tubing, plumbing stuff, corks. I swear in spite of all the 24/40 we have, it seems like no
project is done without screwing around with corks/rubber stoppers.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
