j_sum1
Administrator
Posts: 6307
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
What to do with 100 grams of lithium chloride
I am on the receiving end of some 20 year old chemicals being discarded by the school I currently work in. Not too much of note: a few grams of
copper sulfate, a similar amount of some other salts. But there is also a near full bottle of LiCl.
I checked my stocks at home: I don't currently have any lithium chloride. I have plenty of lithium metal and enough lithium carbonate. But it seemed
to me that this quantity of LiCl should be useful for a project of some kind. Any thoughts?
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
Makes a pretty color with methanol.
Not the best example but something.
https://www.youtube.com/watch?v=OUsha3uFPAA
|
|
|
bnull
Hazard to Others
Posts: 386
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Dazed and confused.
|
|
Crystals. Morphology of crystals vary according with whatever else is in solution. Sodium chloride crystallises in octahedrons rather than cubes in
the presence of urea, for example.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
Sir_Gawain
Hazard to Others
Posts: 402
Registered: 12-10-2022
Location: Due South of Due West
Member Is Offline
Mood: Like a pendulum
|
|
Electrolysis to lithium chlorate? That would make some brilliant red pyrotechnics!
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
|
woelen
Super Administrator
Posts: 8011
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
LiCl has unusual solution proerties. It also dissolves in several organic solvents, at least to some extent. If you dissolve it in methanol, then
burning that methanol gives amazing flame colors (methanol itself gives nearly invisible flames). Dissolving a tiny little bit of boric acid (H3BO3)
or boron trioxide (B2O3) in it as well can give beautiful flame colors, ranging from green, yellow to red.
Making LiClO3 from it is not easy. LiOH is soluble in water, but not as well as NaOH or KOH and it is even less soluble if a lot of other lithium salt
is dissolved. At the cathode, you'll get turbidity, especially, if also some carbon dioxide is dissolved in the water (Li2CO3 is even less soluble).
Another issue is that LiClO3 is amazingly hygroscopic, getting clean dry LiClO3 will be hard.
[Edited on 13-9-24 by woelen]
|
|
|
j_sum1
Administrator
Posts: 6307
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
Thanks for suggestions.
Red flame tests is pretty much the only thing it gets used for at school. I know about the methanol version, but I hadn't realised just how soluble it
is in lower alcohols.
I don't think I will go for chlorates. For one, I don't have a suitable electrode. But I also have not really got into fireworks much. And my schedule
these days precludes beginning projects in a whole new field.
Making some red and green spirit lamps for Christmas is probably a good idea.
Growing some crystals could be interesting. Especially if I can do some big ones.
Anyway, it is at least a couple of weeks before I can get it. So plenty more thinking time.
|
|
|
Sulaiman
International Hazard
Posts: 3678
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
not such a good idea if
indoors.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
unionised
International Hazard
Posts: 5122
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Calibration of hygrometers?
The sensible answer is probably "put it to one side until you actually think of a use for it".
|
|
|
clearly_not_atara
International Hazard
Posts: 2781
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
LiCl/dimethylacetamide is a popular system for dissolving cellulose.
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
Interesting negative thermal expansion property with lithium
Conventional NTE Materials
In stark contrast to ordinary materials, some materials contract upon heating. Some examples are those of a silicon oxide family including
β-eucryptite (LiAlSiO4) and cordierite (Mg2Al2Si5O18), which were reported in the 1950s (Gillery and Bush, 1959).
https://www.frontiersin.org/journals/chemistry/articles/10.3...
These products listed all have a crystalline component, like milk glass or Corningware. As with Corningware, the crystals that form within the glass
have a negative CTE (they contract as they warm up, and expand as they cool down). The volume fraction of glass vs. crystals is adjusted until the
overall CTE is zero (the glass expands exactly as much as the crystals contract). Usually these crystals are based on lithium compounds.
The Temperature Shock Resistance (TSR) of ceramic glass characterizes the ability of a panel to withstand the temperature shock in which cold water
is poured onto a hot panel. As a result of the fact that the TSR of Pyroceram® is practically zero, the temperature shock caused by sudden cooling
with cold water leads to only minor stresses. The shock resistance is therefore normally limited only by the maximum operation temperature: Short Term
Usage: 760° C / 1,400° F. Long Term Usage: 680° C / 1, 256° F. These ceramic glasses have a Transparent-amber tint.
https://www.woodstove-fireplaceglass.com/pages/pyroceram-gla...
[Edited on 14-9-2024 by Morgan]
|
|
|
fx-991ex
Hazard to Self
Posts: 97
Registered: 20-5-2023
Member Is Offline
|
|
Use it as dissicant or make battery.
Or extract the lithium metal from it? that will be kinda hard since it react with oxygen and water.
[Edited on 14-9-2024 by fx-991ex]
|
|
|
Admagistr
Hazard to Others
Posts: 360
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
Quote: Originally posted by fx-991ex  | Use it as dissicant or make battery.
Or extract the lithium metal from it? that will be kinda hard since it react with oxygen and water.
[Edited on 14-9-2024 by fx-991ex] |
It is reported that lithium metal can be obtained from solution by electrolysis when anhydrous LiCl is dissolved in pyridine. But I haven't tried it
yet because I have a stockpile of metallic Li.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
