xgregg676
Harmless
Posts: 3
Registered: 15-8-2024
Member Is Offline
|
|
Simple water aspirator setup
I've seen a few water aspirator setups
I am wanting to construct my own using a Chapman water aspirator.
Id like it to have a vacuum gauge displaying pressure in mmHg,
Preferably an efficient pump to keep the water as cool as can be, and a way to turn it on slowly.
Not sure what fitments of pipe I'd need, or which pump would be best.
Looking for recommendations / information.
Thank you
|
|
|
charley1957
Hazard to Others
Posts: 159
Registered: 18-2-2012
Location: Texas
Member Is Offline
Mood: Roasting
|
|
There are a few threads on this forum about water aspirator setups. A search using the term aspirator should bring them up. Other than that, there
is a lot of information about it on them there interwebs.
You can’t claim you drank all day if you didn’t start early in the morning.
|
|
|
xgregg676
Harmless
Posts: 3
Registered: 15-8-2024
Member Is Offline
|
|
Another question I have is it more economical to build one or buy one.
VEVOR has a deal right now on the recirculation water vacuum aspirator for 100 bucks'
|
|
|
Sulaiman
International Hazard
Posts: 3678
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
If the aspirator is for 'vacuum' filtration then I recommend a cheap mechanical pump.
Buy a couple, one for rough use and one spare.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
