RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
Aluminuim sulfide synthesis
Today I performed my first "ok" thermite to make Aluminium sulfide.
Aluminium is handfiled (from a processor heatsink)
Sulfur is mortar crushed from sulfur cyllinders.
Boths powders are mixed in the mortar.
First try was to make a loose "mountain" with a sparkle inside,
Sulfur melted (and got ignited "blue fire") but no thermite.
Second try was to put the mixture (aprox 1gr Al + 1,5gr S) in a 8ml testube - was compacted and added a sparkled with preassure in the middle.
Ignited the sparkler, but it did not ignite the thermite. A hole long as the sparkled - with molten sulfur - was made.
third try, in the hole, another sparkler was inserted + some magnesium ribbon. It ignited, some sparks flyed, the test tube got red and deformed.
Once everything was cold, the test tube was crushed and H2S smell was evident.
A small globe of aluminium is seen, covered with (I think) is Al2S3.
Pic attached.(the black part is test tube glass)
From seeing the globule of Aluminium, it seems it all not reacted. Probably because in the second try, the sparkler removed some Sulfur.
Which is the best by weight ratio between sulfur and Aluminium? (example 2:1 (sulfur/Aluminium)
Any suggestions on making this thermite? (better ignition sources?) Maybe direct blowtorch fire? - Sulfur melted quite rapidly.
Go SAFE, because stupidity and bad Luck exist.
|
|
|
bnull
Hazard to Others
Posts: 431
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Online
Mood: Dazed and confused.
|
|
According to Brauer (see attachment), it's 96.2 g S to 54 g Al, or 16:9 S:Al, with an excess sulfur added on top. Your 2:1 just fits it. And there is
always some unreacted aluminum mixed with the product.
Attachment: Al2S3.pdf (249kB)
This file has been downloaded 147 times
[Edited on 18-3-2024 by bnull]
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
Thanks
Go SAFE, because stupidity and bad Luck exist.
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
I did the same thing a few months ago, i tried with Al blended in mineral oil(removed mineral oil of course) and it didnt work.
But, i did it again with Al sanded from a Al block and it ignited using a red hot Stainless-steel metal piece.
About the ratio its simple chem balancing equation
2 Al + 3 S = Al2S3
2 mole of Al(27*2) = 54G, 3 mole of S(32*3) is 96.2G
I like to use this tool for balancing(yeah i know am lazy):
www.webqc[dot]org/balance.php
(i hope linking to external site is allowed here).
|
|
|
Admagistr
Hazard to Others
Posts: 363
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
Quote: Originally posted by fx-991ex  | I did the same thing a few months ago, i tried with Al blended in mineral oil(removed mineral oil of course) and it didnt work.
But, i did it again with Al sanded from a Al block and it ignited using a red hot Stainless-steel metal piece.
Yes, it is best to ignite the mixture with a gas flame or a red-hot stainless steel rod, as magnesium in particular, or possibly a sparkler, will
contaminate the resulting mixture. If you don't sublimate the Al2S3 from the mixture it will be of poor quality, but it depends on what you want to
use it for afterwards.
|
|
|
|
RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
Thanks,
regretfully 1500ºC sublimation is out of my reach....
Go SAFE, because stupidity and bad Luck exist.
|
|
|
Admagistr
Hazard to Others
Posts: 363
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
I recall that there used to be a method of melting PbS with powdered aluminum in a crucible to prepare Al2S3. It separated the lead, which was cast
off, leaving Al2S3 of perhaps decent purity. But I haven't tried it yet.
|
|
|
Admagistr
Hazard to Others
Posts: 363
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
For interest: In the 1930s, the well-known German chemist Hermann Rompp considered the possibility of synthesizing Al2S3 from Al powder and
thiosulfate. With that said, there is one sulfur atom in the thiosulfate that is relatively loosely chemically bonded and this sulfur atom will form
bright yellow Al2S3 with the aluminum. In practice, it would probably be difficult to separate it from the resulting reaction mixture, perhaps it
could somehow be done based on the different melting temperatures of the reaction products. If ammonium thiosulphate were used, perhaps the other
components formed by the chemical reaction could be evaporated by violent annealing. I state this rather for interest and consideration
[Edited on 20-3-2024 by Admagistr]
|
|
|
bnull
Hazard to Others
Posts: 431
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Online
Mood: Dazed and confused.
|
|
| Quote: Originally posted by Admagistr | | I recall that there used to be a method of melting PbS with powdered aluminum in a crucible to prepare Al2S3. It separated the lead, which was cast
off, leaving Al2S3 of perhaps decent purity. |
Here it is.
Attachment: Al2S3 (Blanchard et. al, Synthetic Inorganic Chemistry).pdf (270kB)
This file has been downloaded 117 times
Ammonium and sodium thiosulfates decompose above 100 °C.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
thanks,
regarding this procedure, how to easily obtain PbS?
Could I melt Pb with Na2CO3 + S? (like polisulfide preparation)?
or adding a soluble lead salt (lead acetate comes into my mind) in a polisulfide solution (made from Na2CO3 + S)
(I would like not to work with H2S gas bubbling)
and regarding furnace (which I dont have) temperature, could I use a camping stove (outside) and a tin can (food can)? I have made fishing weight this
way.
Or temperatures should be 500°C +?
Go SAFE, because stupidity and bad Luck exist.
|
|
|
Admagistr
Hazard to Others
Posts: 363
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
| Quote: Originally posted by RU_KLO | thanks,
regarding this procedure, how to easily obtain PbS?
Could I melt Pb with Na2CO3 + S? (like polisulfide preparation)?
or adding a soluble lead salt (lead acetate comes into my mind) in a polisulfide solution (made from Na2CO3 + S)
(I would like not to work with H2S gas bubbling)
and regarding furnace (which I dont have) temperature, could I use a camping stove (outside) and a tin can (food can)? I have made fishing weight this
way.
Or temperatures should be 500°C +?
|
You can get PbS by heating lead with sulfur, your camping stove will do for that, or from an aqueous solution by mixing lead acetate with an alkaline
sulfide, like sodium sulfide. Na2S is cheap and quite available.You can also use a solution of thiourea and lead acetate, after several chemical
intermediate reactions and after heating the reaction mixture you get lead sulfide and even crystalline synthetic galena by this method. For the
synthesis of PbS+Al, a Mecker torch would be best. A temperature of over 500 C would be needed, preferably 1100 C, but the reaction is exothermic, so
just heat the mixture to that temperature not too long. You can put a crucible on the burning charcoal and blow a stream of air into charcoal, that
should do the trick
|
|
|
Admagistr
Hazard to Others
Posts: 363
Registered: 4-11-2021
Location: Central Europe
Member Is Offline
Mood: The dreaming alchemist
|
|
The crucible can be cheap chamotte, clay, or expensive corundum, I would not use it because it might be a problem to clean it afterwards.The steel can
is perhaps disposable, but the chamotte would be better because of possible Al2S3 contamination from the used can
Just a quick note. Just lead and sulfur, you don't need Na2CO3 for that.
[Edited on 21-3-2024 by Admagistr]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
