TriiodideFrog
Hazard to Others
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
What to do with 6% hydrogen peroxide
Recently, I got a packet of 6% hydrogen peroxide. Strangely, it was sold in a packet (Not like the 3%, which was sold in a bottle). I need some of the
6% Hydrogen Peroxide for the synthesis of copper acetate. Does anyone know any synthesises that require hydrogen peroxide? Thanks
P.S. I know that the synthesis of copper acetate does not need hydrogen peroxide. I just want to accelerate the reaction.
|
|
|
outer_limits
Hazard to Others
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
You can use it to make ammonium iodide or use as oxidizer in organic iodinatins - but 6% could be too low.
You could also concentrate it and make it more useful
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
1.Disinfect stuff
2.Oxidise iron ii to iron iii
3.Make high test peroxide
4.Titrate it
5.Put it in an amber glass bottle and store it
6.Dissolve metals you wouldn't normally be able to in HCl or H2SO4
7.Make organic peroxides (don't do this)
8.Make piranha solution and watch a toothpick or wood chip get destroyed
There's many things one can do with hydrogen peroxide. Don't do 3 7 or 8 unless you know what you're doing
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
Bedlasky
International Hazard
Posts: 1242
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
You can try Fenton reaction. With 35% H2O2 it is more effective, but 6% is good enough. You can also make some metal peroxides. Sr, Ba and Zn
peroxides are quite stable, unlike Ca and Mg peroxides. CuO2 is little bit challenging due to its high unstability, but if you make everything at low
temperatures, it can be make.
itsallgoodjames: Piranha solution is mix of conc. sulfuric acid and 35% H2O2. 6% H2O2 containt too much water.
outer_limits: How do you make NH4I using hydrogen peroxide?
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
Quote: Originally posted by Bedlasky  | You can try Fenton reaction. With 35% H2O2 it is more effective, but 6% is good enough. You can also make some metal peroxides. Sr, Ba and Zn
peroxides are quite stable, unlike Ca and Mg peroxides. CuO2 is little bit challenging due to its high unstability, but if you make everything at low
temperatures, it can be make.
itsallgoodjames: Piranha solution is mix of conc. sulfuric acid and 35% H2O2. 6% H2O2 containt too much water.
outer_limits: How do you make NH4I using hydrogen peroxide? |
One could do 3 then 8.
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
outer_limits
Hazard to Others
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
Bedlasky:
attached the reference.
|
|
|
rockyit98
Hazard to Others
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
put it in a freezer and make more concentrated stuff.
"A mind is a terrible thing to lose"-Meisner
|
|
|
HydrogenSulphate
Harmless
Posts: 38
Registered: 13-10-2019
Member Is Offline
Mood: Caffeinated
|
|
You could make sodium perborate with it, starting with sodium borate. Although, I am not sure whether 6% will be strong enough a concentration.
|
|
|
Bedlasky
International Hazard
Posts: 1242
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
outer_limits: Very interesting, I didn't know that making iodides with H2O2 is possible.
|
|
|
RustyShackleford
Hazard to Others
Posts: 200
Registered: 10-12-2020
Location: Northern Europe
Member Is Offline
|
|
second that, turn it into something more useful! you could reasonably get like 25% out of it
[Edited on 16-12-2020 by RustyShackleford]
|
|
|
MidLifeChemist
Hazard to Others
Posts: 192
Registered: 4-7-2019
Location: West Coast USA
Member Is Offline
Mood: precipitatory
|
|
I use 3% or 6% hydrogen peroxide to make iodine from KI, make copper acetate, and for the iodine clock reaction, among other things. It is very
useful.
|
|
|
njl
National Hazard
Posts: 609
Registered: 26-11-2019
Location: under the sycamore tree
Member Is Offline
Mood: ambivalent
|
|
I find the urea adduct is the most convenient for concentration of weak H2O2
|
|
|
symboom
International Hazard
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Serine peroxide adduct is also good but less stable. It is sensitive to light. Is it possible to form an adduct with 3% without using a desicant of
calcium chloride to concentrate the hydrogen peroxide.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
