Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Feasibility of making a neutron detector tube controller circuit?
itsallgoodjames
Hazard to Others
***




Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline


[*] posted on 26-10-2020 at 07:34
Feasibility of making a neutron detector tube controller circuit?


I'm in need of a neutron detector for a few things, but all the ones that include the control circuitry I've found seem to be multiple thousand dollars. However, I found this, which would probably suit my needs fine. Unfortunately, it doesn't include any of the control circuitry. How would one drive a tube like this? I haven't been able to find any real information on this tube, much less a datasheet. assume it would require high voltage, which isn't really an issue as I have a 10kv power supply. Would it be a similar process to controlling a Geiger tube, or is it completely different?

Thanks!




Nuclear physics is neat. It's a shame it's so regulated...

Now that I think about it, that's probably a good thing. Still annoying though.
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3692
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 26-10-2020 at 11:42


the description in the listing gives 2900 Vdc operating voltage (2850 to 2950)
and it seems to be similar in operation to a GM tube.




CAUTION : Hobby Chemist, not Professional or even Amateur
View user's profile View All Posts By User
itsallgoodjames
Hazard to Others
***




Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline


[*] posted on 27-10-2020 at 10:18


Quote: Originally posted by Sulaiman  
it seems to be similar in operation to a GM tube.


Thanks, I just wanted to verify that they were driven in a similar way.




Nuclear physics is neat. It's a shame it's so regulated...

Now that I think about it, that's probably a good thing. Still annoying though.
View user's profile View All Posts By User
stamasd
Hazard to Others
***




Posts: 133
Registered: 24-5-2018
Location: in the crosshairs
Member Is Offline

Mood: moody

[*] posted on 22-9-2021 at 11:53


That is a Russian corona tube. Corona tubes are weird beasts. They need very specific power supplies and pulse amplifiers if you want to get anything useful out of them. If you try to operate them under the same conditions as usual 3He proportional tubes, all you will get is white noise.
There is a commercially available preamplifier made specifically for this sort of tube. It's not cheap though, and shipping time can be very long depending on where in the world you are (it ships from Australia). https://www.gammaspectacular.com/blue/gamma-spectroscopy/neu...




All your acids are belong to us.
View user's profile View All Posts By User

  Go To Top