Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: bis(chloromethyl)ether from hexamine hydrolysis?
derk19
Harmless
*




Posts: 6
Registered: 26-5-2019
Member Is Offline


[*] posted on 18-5-2020 at 09:56
bis(chloromethyl)ether from hexamine hydrolysis?


Hi there,
A while ago I made some methylamine.hcl through hydrolysis of hexamine into formaldehyde and ammonium chloride with 30% hcl.
More recently, I read that formaldehyde and hcl should never be in contact because highly toxic and carcinogenic bis(chloromethyl)ether can form.

Is this a real danger in this particular synthesis?
I don't have any symptoms, but I am afraid I might have been exposed to this carcinogen.
View user's profile View All Posts By User
mackolol
Hazard to Others
***




Posts: 459
Registered: 26-10-2017
Member Is Offline

Mood: Funky

[*] posted on 18-5-2020 at 12:12


I think it shouldn't be a problem when you add the acid slowly, here is a comment about it from erowid:

"Not when I did it. NO Formaldehyde smell was ever noticed. In fact, the mixing of Hexamine with HCl, if done *slowly* is fairly docile with no real smell elicited. However when you heat the filtered mixture on the stove, it *definitely* stinks to high heaven, but the smell at first is more like an *isocyanate*. "
View user's profile View All Posts By User
myr
Harmless
*




Posts: 48
Registered: 18-7-2018
Member Is Offline


[*] posted on 18-5-2020 at 12:54


I wouldn't worry, as BCME is toxic due to it's reactivity, so it will react with the amine species in solution. It will, at worst, and if it forms, exist only transiently.
View user's profile View All Posts By User
derk19
Harmless
*




Posts: 6
Registered: 26-5-2019
Member Is Offline


[*] posted on 19-5-2020 at 18:56


Okay thanks, that's reassuring.

Now I know that if I get lung cancer it will be because of the smoking.
View user's profile View All Posts By User

  Go To Top