MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Aluminum Powder of Specific Sizes
Hello fellow scientist!
I am working on an independent study for the University and I need to acquire spherical aluminum powder in the following size ranges... I can’t find
any suppliers other than China... which I do not completely trust, or US nano, which is around $.50 cents a gram. I need a kilogram or two of the
following sizes.
10um-15um
40-50um
100um
Any ideas? It cannot be flake, it must be spherical so milling is out of the question, as far as sieving... I believe it would take too long and I
would need to start with 3-5x the amount of material needed.
Where can I acquire these specific sizes?
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Check in the energetics thread, they might know better. Technically can't buy more than a pound per year as per ATF rules... So it will be hard to
find.
|
|
|
anti
Harmless
Posts: 32
Registered: 17-2-2020
Member Is Offline
Mood: Mood: Mood:
|
|
Hello! A company in my country sells what you want. Tho I don't know what it would cost them to ship to you and if they would.( I haven't ordered
anything from them)
This is the catalog they sent me when I asked.
Use Google Translate's document processor.
(They sent it via email, it is 10 MB so I have uploaded it to filedropper)
http://www.filedropper.com/catalogpulberi2020
Hope you will get what you want
Regards
Edit: I can't vouch for them, as I never ordered anything.
They have every imaginable metal powder(1u aluminium for 100$ a killo??? 20u magnesium? Lead powder? 7u tungsten ???? )
[Edited on 14-3-2020 by anti]
[Edited on 15-3-2020 by anti]
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Online
Mood: No Mood
|
|
Look at firework hobbyist sites, here are a few:
https://www.skylighter.com/collections/metals?page=1
https://fireworkscookbook.com/product-category/metals/page/4...
To convert mesh to micron:
https://www.skylighter.com/blogs/fireworks-information/mesh-...
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
I did. They don’t have those sizes. Oh well.
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Online
Mood: No Mood
|
|
You clearly didn't look very hard
9 micron https://www.skylighter.com/collections/metals/products/alumi...
44 micron
https://fireworkscookbook.com/product/aluminum-atomized-sphe...
100 micron is course enough to sift out with a screen from this
https://fireworkscookbook.com/product/aluminum-atomized-alco...
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Yes, I looked at these before posting... as someone who makes sarcastic T shit designs, I will be the first to say... take it easy on the sarcasm
bruh...
Yes, it would take to much of a quantity, and sieving large amounts of a flammable neurotoxic is outside of my willingness for good health.
|
|
|
ShotBored
Hazard to Others
Posts: 124
Registered: 19-5-2017
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by MineMan  | Hello fellow scientist!
I am working on an independent study for the University and I need to acquire spherical aluminum powder in the following size ranges... I can’t find
any suppliers other than China... which I do not completely trust, or US nano, which is around $.50 cents a gram. I need a kilogram or two of the
following sizes.
10um-15um
40-50um
100um
Any ideas? It cannot be flake, it must be spherical so milling is out of the question, as far as sieving... I believe it would take too long and I
would need to start with 3-5x the amount of material needed.
Where can I acquire these specific sizes? |
Hey MineMan. I get aluminum from Toyal that is of pretty high quality. They have flake atomized as well as spherical/spheroidal. http://www.toyala.com/cgi-bin/r.cgi/powders_spherical_aero.h...
A Spanisch colleague of mine gets powdered metals from a company I can't really remember the name of for sure...I thinks it is Jengo or Jango or
something. They are European. Hope this helps, Tchuess!
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by ShotBored | | Quote: Originally posted by MineMan | Hello fellow scientist!
I am working on an independent study for the University and I need to acquire spherical aluminum powder in the following size ranges... I can’t find
any suppliers other than China... which I do not completely trust, or US nano, which is around $.50 cents a gram. I need a kilogram or two of the
following sizes.
10um-15um
40-50um
100um
Any ideas? It cannot be flake, it must be spherical so milling is out of the question, as far as sieving... I believe it would take too long and I
would need to start with 3-5x the amount of material needed.
Where can I acquire these specific sizes? |
Hey MineMan. I get aluminum from Toyal that is of pretty high quality. They have flake atomized as well as spherical/spheroidal. http://www.toyala.com/cgi-bin/r.cgi/powders_spherical_aero.h...
A Spanisch colleague of mine gets powdered metals from a company I can't really remember the name of for sure...I thinks it is Jengo or Jango or
something. They are European. Hope this helps, Tchuess! |
Cool!
Thank you!
|
|
|
ordenblitz
Hazard to Others
Posts: 259
Registered: 18-7-2004
Location: Northwest
Member Is Offline
Mood: Bohr'd
|
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
