nagyepf
Harmless
Posts: 49
Registered: 1-9-2017
Member Is Offline
Mood: No Mood
|
|
Making uranium and thorium by electrolysis?
I wonder if it is possible or not to make uranium and thorium from its soluble compounds by electrolysis?Or will we only get hydrogen gas and never
plate out uranium or thorium metal?
I dont have any uranium or thorium minerals neither chemicals to dissolve them,so i cannot try it out But i'm still curious if it's even possible.
|
|
|
Texium
|
Thread Moved
28-1-2020 at 10:22 |
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
Uranium reacts readily with water to form the oxide, producing hydrogen gas.
Doesn't sound like a happening deal.
Checking if the thing you're trying to make in aqueous solution is stable in aqueous solution is always a good first step.
Maybe you could find a uranium salt soluble in pyridine or something like that giving an ionized enough solution that you can electrolyze it.
Some poster from Britain a few years back wanted to make cesium that way.
Hey, just a thought. you know those electrolytic cells with mercury on the bottom for one electrode that they used to make chlorine gas and
sodium/mercury amalgam in?
They'd take the amalgam and hydrolyze it to get NaOH.
If you ran a the right uranium salt in one of those it might give you uranium/mercury amalgam which you could distill to drive off the mercury.
Anybody up for distilling an amalgam of mercury and uranium at home?
[Edited on 28-1-2020 by SWIM]
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
I recently acquired a uranium salt and was wondering some if the same things.
It would be great to have a thin coating of U on a strip of copper as an element sample.
Unfortunately an aqueous solution is a no go. I have not gitten to researching other options.
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Cotton and Wilkinson say....
The [actinide] metals may all be prepared by a method applicable on either a [micro]gram scale, as in the first preparation of Cm, or on a
multikilogram scale. This is the reductuion of one of the anhydrous fluorides MF3 or MF4 with the vapour of Li, Mg, Ca, or Ba at 1100 to 1400 oC;
chlorides or oxides can be reduced similarly. On large scales (e.g., for U) Mg or Ca is normally used.
There are other procedures; thus very pure Th is made from thermal decomposition (de Boer process). Electrolytic methods are not commonly used, but
Th can be obtained from a melt of ThF4, KCN, and NaCl. Amarecium has been obtained by a method depending on its volatility, which is greater than
that of the other actinides:
2 La + Am2O3 = 2 Am(g) + La2O3 (1200 oC)
Curium has also been made on a gram scale by extraction from a melt of MgCl2, MgF2, and CmO2 with molton Zn-Mg alloy, the excess of which is then
distilled off; uranium can also be obtained as an amalgam, from which is can be recovered, bu action of Na/Hg on uranyl acetate.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
I wouldnt think so. F block elements tend to be too reactive towards water and as far as I know can not be plated out of solution.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
UCl3 melts at 850°C or thereabouts. Bromide and iodide are probably lower. Lower MP mixtures may also be possible. So, molten salt electrolysis is
not out of the question theoretically.
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I expect uranium (which normally is in the +6 oxidation state in UO2(2+) ion) to be reduced to U(4+) by electrolysis. When no acid is present the
oxygen in the uranyl ions leads to hydroxide formation in solution and you get precipitate around the cathode. If sufficient acid is present, you
might get a solution with U(4+).
The above is all an educated guess, not more than that. I cannot test it in real experiments.
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
Quote: Originally posted by j_sum1  | | UCl3 melts at 850°C or thereabouts. Bromide and iodide are probably lower. Lower MP mixtures may also be possible. So, molten salt electrolysis is
not out of the question theoretically. |
Theoretically, yes. But U(III) compounds are highly reducing - similar to Cr(II). They are preparable for the amateur, but preparing and melting a
pure dry sample without oxidising it could be... challenging to say the least.
|
|
|
nagyepf
Harmless
Posts: 49
Registered: 1-9-2017
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by SWIM | Uranium reacts readily with water to form the oxide, producing hydrogen gas.
Doesn't sound like a happening deal.
Checking if the thing you're trying to make in aqueous solution is stable in aqueous solution is always a good first step.
Maybe you could find a uranium salt soluble in pyridine or something like that giving an ionized enough solution that you can electrolyze it.
Some poster from Britain a few years back wanted to make cesium that way.
Hey, just a thought. you know those electrolytic cells with mercury on the bottom for one electrode that they used to make chlorine gas and
sodium/mercury amalgam in?
They'd take the amalgam and hydrolyze it to get NaOH.
If you ran a the right uranium salt in one of those it might give you uranium/mercury amalgam which you could distill to drive off the mercury.
Anybody up for distilling an amalgam of mercury and uranium at home?
[Edited on 28-1-2020 by SWIM] |
I am not sure if uranium and thorium form amalgams
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Are you doubting Cotton and Wilkinson?????????
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
If you have sodium, mercury and a CCl4 you could try this:
https://sci-hub.tw/https://doi.org/10.1016/0022-1902(69)80145-4
It still needs seperation from the mercury though, but if you get as far as the point described in the article above, that should be doable as well.
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
If heat will drive the mercury off, then perhaps it could be 'fire gilded' onto another metal the way they used to put gold on some tremendously
ornate french clocks and other sideboard impedimenta back in the 19th century.
You could gild it onto a little statue of Uranus!
Maybe trying thorium first would be a good idea though.
People wouldn't be alarmed at your saying, "I'm going to put a permanent coating of radioactive material on Thor", because that phrase is less likely
to lead to misunderstandings.
|
|
|
chornedsnorkack
National Hazard
Posts: 563
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
https://www.sciencedirect.com/science/article/abs/pii/002219...
Uranium metal produced by electrolysis into amalgam.
For those who can get into full text, why was the amalgam heated to 1300 degrees to get U? How much Hg was left in at 400 degrees?
Note that U(III) aqueous cation is routinely produced by zinc amalgam, so electrolysis in absence of amalgam should reduce U(IV) to U(III) already.
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Next time: go to sci-hub.tw and fill out e.g. the DOI. Pass the captcha and Voila!
https://sci-hub.tw/https://doi.org/10.1016/0022-1902(78)80432-1
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
