JDMonster
Harmless
Posts: 2
Registered: 13-10-2019
Member Is Offline
|
|
How to deal with waste?
Hey guys, I am currently studying Chemical Engineering at my university and I've been wanting to do my own reactions and extractions on the side when
I'm on break. How do you guys deal with waste considering that subscriptions to companies are quite expensive?
|
|
|
j_sum1
|
Thread Moved
13-10-2019 at 19:04 |
JDMonster
Harmless
Posts: 2
Registered: 13-10-2019
Member Is Offline
|
|
Sadly my University runs a very tight ship when it comes to waste, so dumping it off there isn't an option.
|
|
|
Sulaiman
International Hazard
Posts: 3695
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Online
|
|
There are many threads on this topic here on SM,
the general principles are;
. choose reaction paths that use the least toxic reactants and produce the least toxic products
. use minimum quantities required to get the desired result
. research your reactants and products - dealing with waste should be obvious based on this knowledge
acids, bases, oxidants and reductants can be neutralised
things such as heavy metals;
convert to insoluble salts, dry, mix into small concrete blocks for disposal.
solvents should ideally be recovered for further use by distillation etc.
For each planned experiment you can ask here on SM for specific advice.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
- Buy ice cream
- Eat the ice cream
- Clean the ice cream boxes
- Buy concrete
- DO NOT EAT THE CONCRETE.
But I'm sure from there you'll figure it out 
There's also the option of dîsposing of your (solid) waste by putting it in a sealed container and then filling said container with expansive foam.
Keep in mind one of the properties of expansive foam is that... it expands ! And if you empty the canister and then remove the plastic straw... oh
boy...
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
|
subsecret
Hazard to Others
Posts: 424
Registered: 8-6-2013
Location: NW SC, USA
Member Is Offline
Mood: Human Sadness - Julian Casablancas & the Voidz
|
|
Most non-chlorinated solvents can be burned safely. You might be able to deal with chlorinated materials by heating with sodium hydroxide so they're
no longer chlorinated, and then burning.
For inorganics, the concrete blocks are a good idea. Make sure you keep your metal waste containers alkaline so nothing's soluble. Note: long-term
storage in 5-gal buckets isn't a good idea and will likely leak. 
Fear is what you get when caution wasn't enough.
|
|
|
teodor
National Hazard
Posts: 876
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
Hm, some of metals/nearly metals ions (Pb, As) dissolve in alkaline solutions pretty well. For that reason I add sodium polysulfide solution to my Pb
waste. PbS is insoluble, this way I can handle it safely.
[Edited on 29-10-2019 by teodor]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
