khourygeo77
Hazard to Others
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
Ethanol + Urea --> Ethyl carbamate?
Hello,
I want to react ethanol with urea. After searching, I realized the product would be ethyl carbamate. So I was wondering how long the reaction will
take and if any catalyst is needed to make this reaction possible? Also the required temperature? reaction time?
I bought some urea as fertilizers in granules but they are tinted green. Hopefully there is nothing else added as I could remove the coloring with
alcohol.
I understand the dangers of ethyl carbamate as a carcinogenic and wont eat, breathe, touch or make any skin contact possible.
So anyone has any idea?
Thanks!
[Edited on 26-4-2019 by khourygeo77]
[Edited on 26-4-2019 by khourygeo77]
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
i can't find any infos apart from "ethyl carbamate is made by heating ethanol and urea together", so i say try it, just as a test.
using an excess of ethanol should make sure to consume all the urea, but i fear that the excess could react with the ethyl carbamate and remove the
last -NH2, dunno.
anyway testing if it works at all should be easy, the reaction produces ammonia, the reagents at the beginning should have a neutral pH, if the
solution results basic, maybe it's working (hoping is not just the urea decomposing)
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
arkoma
Redneck Overlord
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
hmm. i have plentiful supplies of both. wikipedia says ammonia gas given off. might just try a few milliliter size reaction. been really really lazy
in lab lately anyway,
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
khourygeo77
Hazard to Others
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
The reaction may take time, like weeks, though I am not sure. So I may not be able to know that for sure in a day 
|
|
|
clearly_not_atara
International Hazard
Posts: 2787
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
ZnO is a catalyst, IIRC.
|
|
|
khourygeo77
Hazard to Others
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
I dont want to use catalysts. I want to find out about the reaction without any additive except maybe water
This is the information I found out with the related citations:
https://www.researchgate.net/publication/7935594_Effects_of_...
It looks like the reactions is very slow and partial in diluted form
[Edited on 27-4-2019 by khourygeo77]
[Edited on 27-4-2019 by khourygeo77]
|
|
|
khourygeo77
Hazard to Others
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
Also this:
http://en.cnki.com.cn/Article_en/CJFDTOTAL-SXHG200705007.htm
But I dont have the labware to perform such an experiment. Maybe I will need to keep distilling them together many times to obtain a high yield
Any idea how good ethyl carbamate would be as a solvent for rust or similar metal oxides? 1st in its melting point form and 2nd in an aqueous or
alcoholic solution. I wanted to make ethyl carbamate to find this out. I know there are other solvents but I need to find the solvent capacity of
ethyl carbamate. Finding out the solvent potential of a related compound can also help out in finding out its solvent capacity. (For example methanol
and ethanol can almost dissolve the same things)
Thanks
[Edited on 27-4-2019 by khourygeo77]
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
Just some tidbits/fun facts from Wiki.
"Ethyl carbamate has been used as an antineoplastic agent and for other medicinal purposes, but this application ended after it was discovered to be
carcinogenic in 1943. However, Japanese usage in medical injections continued and from 1950 to 1975 an estimated 100 million 2 ml ampules of 7 to 15%
solutions of ethyl carbamate were injected into patients as a co-solvent in water for dissolving water-insoluble analgesics used for post-operation
pain. These doses were estimated to be at levels that are carcinogenic in mice.[3] This practice was stopped in 1975. "This regrettable medical
situation appears to have involved the largest number (millions) of humans exposed to the largest doses of a pure carcinogen that is on record".[4]
"Prior to World War II, ethyl carbamate saw relatively heavy use in the treatment of multiple myeloma before it was found to be toxic, carcinogenic,
and largely ineffective.[5] By US FDA regulations, ethyl carbamate has been withdrawn from pharmaceutical use. However, small quantities of ethyl
carbamate are also used in laboratories as an anesthetic for animals.[6]"
"It has been shown that ethyl carbamate forms from the reaction of ethanol with urea.
This reaction occurs much faster at higher temperatures, and therefore higher concentrations of ethyl carbamate are found in beverages that are heated
during processing, such as brandy, whiskey, and other distilled beverages. Additionally, heating after bottling either during shipping or in
preparation will cause ethyl carbamate levels to rise further."
|
|
|
arkoma
Redneck Overlord
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
*semi off topic* getting ready to go home and squeeze some high test EtOH out of a bucket of waste from lovely little yeast cells
will pull the 95% off the top so I have something to heat with urea tomorrow.
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Its carcinogenic property may be discovered in 1943 but I do have a pharmaceutical book printed in 1969 that still lists this compound as a treatment
for various leucemias. With daily doses, for adults as well as children, etc. I'm not sure if it was used in those days, but the "knowledge" was
there.
Urethane was (still is?) used as an anaesthetic in animals, I read a laboratory manual from the seventies where they routinely anaesthetised frogs by
sprinkling urethane (its common name) crystals on the damp skin of the animals!
|
|
|
wg48temp9
National Hazard
Posts: 783
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
I was curious as to what conditions are required for the reaction between ethanol or methanol and urea as all the reagents are readily available.
Apparently high temperatures (above the BP's of ethanol or methanol) are required and preferably with a catalyst (MgCl2) to reduce the reaction times
to hours from days. The temperatures above the BP's would require an autoclave not a huge problem as I assume a steel CO2 bottle could be used. I
assume the ammonia produced would have to be released to drive the reaction in the right direction
However I did find a US patent that suggests using only a 0.5molar excess of the alcohol with a copper acetate catalyst at atmospheric pressure and
about 130C (reflux temperature) the reaction is complete in three hours. It also states that without the catalyst the reaction time would be 30 hour.
So the reaction may only require refluxing the alcohol and urea (1.5:1 molar ratio) for say two days at about 130C preferable with the temperature
PID controlled if the you don't want to mind it for that long.
Here is the patent Attachment: monocarbamates-US2837561.pdf (224kB)
This file has been downloaded 434 times
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Morgan  |
"This regrettable medical situation appears to have involved the largest number (millions) of humans exposed to the largest doses of a pure carcinogen
that is on record".
|
That rather depends on your view of vodka as a pure carcinogen.
The urethane concn was only about 10%
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by unionised | | Quote: Originally posted by Morgan |
"This regrettable medical situation appears to have involved the largest number (millions) of humans exposed to the largest doses of a pure carcinogen
that is on record".
|
That rather depends on your view of vodka as a pure carcinogen.
The urethane concn was only about 10% |
Might as well put sunlight on the list too. There's a lot of things that can get you for sure. Some of the side effects of the drug commercials on TV
seem nearly as bad as the ailments they offer to cure. And of course some can be worse.
[Edited on 28-4-2019 by Morgan]
|
|
|
arkoma
Redneck Overlord
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
On my mobile. Going to try and set if I can post pictures on a moment. Yesterday morning I put 25ml denatured
EtOH (710 solvent) and one gram of urea in a 50ml beaker and started stirring. This morning I have a non soluble white crust built up. Will check when
I get off work today. Still stirring.
 
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
BromicAcid
International Hazard
Posts: 3244
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I did some work on this forum years back making ethylene carbonate using ethylene glycol / urea. The reaction used a zinc oxide catalyst. The issue
I see in translating that process to one using ethanol is that the formation of the ethylene carbonate was driven by pulling off the ammonia produced
under vacuum. It was still a somewhat slow reaction, but I would think refluxing the reaction medium would help to degas ammonia and drive it
forward.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
You'll have to look up Hofmann's langerem Kochen (Ber. 4, 268)...always best to start at the beginning...Beilstein mentions as a preparation that one
Italian about 1892-ish gradually added equimolar NaNO2 to urea nitrate in 5 parts heated alcohol, and another apparently reproduced this before 1923.
|
|
|
arkoma
Redneck Overlord
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Used no catalyst so far, but thinking about a drop or two of H2SO4. I'm practically ancient, so carcinogens don't intimidate me LOL
Edit removed redundant picture. Stupid mobile phone.
Re edit. Mobile web throws me.
[Edited on 4-30-2019 by arkoma]
[Edited on 4-30-2019 by arkoma]
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Interestingly, ethyl carbamate itself is not a carcinogen. However, it's oxidized by CYP450 enzymes to the epoxide, which then can react with DNA.
(It's similar to benzene in this respect.)
|
|
|
Drunkguy
Hazard to Others
Posts: 172
Registered: 23-12-2005
Member Is Offline
Mood: somewhat pissed.
|
|
Ethylcarbamate is used as a fish narcotic and a hypnotic for human use.
It's probably not that bad for you to use it in a limited amount.
|
|
|
Errata
Harmless
Posts: 5
Registered: 6-9-2020
Member Is Offline
Mood: Yes
|
|
I know that this is the same route to synthesize dimethylcarbonate, so you'll probably have to stop the reaction at a specific point to get ethyl
carbamate instead of diethylcarbonate. Paper for reference: Synthesis of Dimethyl Carbonate from Urea and Methanol over ZnO. Might be worth making methyl carbamate and transesterifying it.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
