ChemistryForever
Hazard to Self
Posts: 64
Registered: 6-12-2018
Member Is Offline
|
|
U and Th
Is there any european source for uranium and thorium ( metallic or compounds, does not matter ) than onyxmet ?
|
|
|
urenthesage
Hazard to Self
Posts: 77
Registered: 21-2-2016
Member Is Offline
Mood: No Mood
|
|
How much do you need? If its just for an element sample I could probably oblige. And its raw urananite for the uranium, so its technically a mineral
sample so it should be legal to mail. For Thorium, go to ebay, look for dirt cheap thoriated welding rods, get a bunch, and put them in strong
peroxide. The thoria (ThO2) will sink as a whiteish blue powder. You also get a pile of tungsten oxide left in solution which you can get by
evapourating the liquid portion of whats left. The Thoria isnt really soluble in water so just pour off the yellow liquid for your tungsten.
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
I was able to buy 5g of uranyl acetate from a Polish ebay seller, you need to keep your eyes open, every now and then something appears in the
listings
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Autunite is in my opinion a much better option than uraninite for uranium compound extraction, and is readily available on Ebay for mineral
collections. It contains around 40% uranium by mass. See my video on its extraction if you want a step by step tutorial. https://www.youtube.com/watch?v=1NmY-emT7R0
Thorium can be easily extracted from thoriated tungsten welding rods containing 2% by mass thorium oxide, which can be dissolved using hydrogen
peroxide leaving the oxide as a grey powder.
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Nice video, thanks for sharing.
If you also want to isolate radium from the same sample the pitchblende might be preferable, because autunite contains calcium, which will be
difficult to separate from Ra.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by phlogiston  | Nice video, thanks for sharing.
If you also want to isolate radium from the same sample the pitchblende might be preferable, because autunite contains calcium, which will be
difficult to separate from Ra. |
at only a few grams of radium per ton of pitchblende i see it a hard task
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
For many element collectors, a few micrograms suffice. Just enough Ra-containing barium to be detectable makes a nice sample.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
