Xenos
Harmless
Posts: 22
Registered: 29-8-2002
Member Is Offline
Mood: No Mood
|
|
Chemical Isolation of Fluorine
I know I should probably reply to more existing posts first, but i have this knawing question. I read that in the 80s someone found a way to isolate
Fluorine by chemical instead of electrical means. I dont actually plan on doing this! It would most definatly result in death. I was just wondering if
anyone knew how this could be done.
|
|
|
Rhadon
Hazard to Others
Posts: 169
Registered: 26-5-2002
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Patent: Pure fluorine gas generator
US Patent 4,711,680 shows something that could be from interest. Enter the patent number into this form.
Here are some examples
More details can be found in the patent
EXAMPLE 1
A mixture of K2NiF6 (0.369 g) and BiF5 (1.372 g) was rapidly heated, as described above. When the inside temperature
reached about 60 °C., rapid fluorine evolution started, resulting in a maximum pressure of 990 torr at a reactor temperature of 170 °C. The purity
of the evolved fluorine (1.1 mmol) was shown by mercury analysis to be in excess of 99%.
EXAMPLE 2
A mixture of Cs2CuF6 (0.89 g) and BiF5 (1.20 g) was rapidly heated, as described in Example 1. Again, pure fluorine
(0.9 mmol) was evolved, resulting in a maximum pressure of 836 torr.
EXAMPLE 3
A mixture of Cs2MnF6 (2.115 g) and BiF5 (4.515 g) was rapidly heated, as described in Example 1. Again, pure fluorine
(1.0 mmol) was evolved, resulting in a maximum pressure of 929 torr.
EXAMPLE 4
A mixture of K2NiF6 (1.584 g) and TiF4 (0.774 g) was rapidly heated, as described in Example 1. Again, pure fluorine
(0.87 mmol) was evolved in the temperature range 65 ° to 170 °C., resulting in a maximum pressure of 810 torr.
EXAMPLE 5
A mixture of K2NiF6 (0.486 g), TiF4 (0.240 g) and BiF5 (0.590 g) was rapidly heated, as described in
Example 1. Again, pure fluorine (0.88 mmol) was evolved in the temperature range 60 ° to 180 °C., resulting in a maximum pressure of 820 torr.
|
|
|
PrimoPyro
on fire
Posts: 122
Registered: 7-8-2002
Member Is Offline
Mood: No Mood
|
|
Other Hypothetical Methods
Cheat and use a hypofluorite (if you can find one) 
NaOF + 2HF --> NaF + F2 + H2O
If you cannot use that, then oxidize HF to F2 with H2O2.
2NaF + H2SO4 --> Na2SO4 + 2HF
2HF + H2O2 --> F2 + 2H2O
Or like I joked once before, bombard a fluoride salt with alpha particles. Fluorine will not take an electron from a positive sodium ion Na+ because
the system of 2Na+ + F2 is more stable than the system of 2Na+2 + 2F-.
2NaF + He+2 --> He + 2NaF+ --> He + 2Na+ + F2
But that isn't realistic, and quite frankly it's cheating isn't it? lol.
PrimoPyro
|
|
|
madscientist
National Hazard
Posts: 962
Registered: 19-5-2002
Location: American Midwest
Member Is Offline
Mood: pyrophoric
|
|
Er, you can't oxidize HF to liberate F2. Fluorine is, after all, the most electronegative element. Here's an example of what happens:
3H2O + 3F2 ----> 6HF + O3
I weep at the sight of flaming acetic anhydride.
|
|
|
PrimoPyro
on fire
Posts: 122
Registered: 7-8-2002
Member Is Offline
Mood: No Mood
|
|
Damn, Fluorine Wins Again
I'm not used to the stubbornness of fluorine; that's twice I've been wrong about it.
I usually consider electronegativities secondly, which has dire consequences with inorganic chemistry where they are very important.
I was thinking with the old basic rule that a reaction usually proceeds if it a)produces water as a product, or b)produces a gas as a product.
PrimoPyro
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Heating AgF2?
|
|
|
Rhadon
Hazard to Others
Posts: 169
Registered: 26-5-2002
Location: Germany
Member Is Offline
Mood: No Mood
|
|
"Chemical Engineering News" (15.09.1986) does also state a method for preparing elemental fluorine by chemical means.
Has anyone acces to this article?
|
|
|
madscientist
National Hazard
Posts: 962
Registered: 19-5-2002
Location: American Midwest
Member Is Offline
Mood: pyrophoric
|
|
Heat PbF4 to about 100C and it should liberate F2.
I weep at the sight of flaming acetic anhydride.
|
|
|
Xenos
Harmless
Posts: 22
Registered: 29-8-2002
Member Is Offline
Mood: No Mood
|
|
So why would heating PbF4 or AgF2 free the Fluorine? There has to be a scientific reason.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Well, halogens of silver are notoriously unstable and decompose already under the influence of light, which is used in photography.
PbF4 could also liberate F2 because Pb +4 easily reduces to Pb+2. That's why PbO2 is a relatively strong oxidizer.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
a_bab
Hazard to Others
Posts: 458
Registered: 15-9-2002
Member Is Offline
Mood: Angry !!!!!111111...2?!
|
|
So why the old chemists didn't use this method ? There were lots of intoxicated and even some victims in the race for fluorine isolation as you know.
Nah, I don't believe that it'll work.
|
|
|
Polverone
Now celebrating 21 years of madness
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
No, I think the method will work. But I don't think you will be able to produce AgF2 without using elemental fluorine at some point. So this is really
a method of chemically storing fluorine, not producing it.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
[The combustion of compositions containing an excess of oxidizer may involve the evolution of free fluorine in certain cases. The formation of free
fluorine will be most likely when the oxidizers used are fluorides of variable valence metals CoF3, MnF3, PbF4, etc. for example:
6CoF3 + 2Mg ---> 2MgF2 + 6CoF2 + F2]
Principles of Pyrotechnics [A.A.Shidlovskiy] Third edition
Maybe this might work with teflon, doesn't fit the description and the reaction would be hard to control but it is more readily availible as a
pyrotechnic supply.
Or maybe Xenon Difluoride, it can be used as a fluorinating agent easily and Xenon gas is the only by product, this site has a list of people that
sell it http://www.xactix.com/suppliers.htm does anyone know of a place that sells fluorine cylinders?
|
|
|
blip
Hazard to Others
Posts: 133
Registered: 16-3-2003
Member Is Offline
Mood: absorbed
|
|
I remember reading about Sir Humphrey Davy decompsing some flourine manganese complex or something to get it, but that was before I knew much about
chemistry.
| Quote: |
NaOF + 2HF --> NaF + F2 + H2O
|
Fluorine likes to form FOF.
NaOF + HF <strike> </strike>> FOF + NaOH
NaOH + HF <strike> </strike>> NaF + H<sub>2</sub>O
Another example:
H<sub>2</sub>O + F<sub>2</sub> <strike> </strike>> HF + HOF
HOF + F<sub>2</sub> <strike> </strike>> OF<sub>2</sub> + HF
|
|
|
I am a fish
undersea enforcer
Posts: 600
Registered: 16-1-2003
Location: Bath, United Kingdom
Member Is Offline
Mood: Ichthyoidal
|
|
The classic method of isolating fluorine chemically is to heat a mixture of antimony pentafluoride and potassium hexafluoromanganate(IV) at 150C.
This was discovered in the late 19th century.
1f `/0u (4|\\| |234d 7|-|15, `/0u |234||`/ |\\|33d 70 937 0u7 /\\/\\0|23.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
A little more detail on I am a Fish's fluorine production method he brought up from:
http://www3.district125.k12.il.us/chemmatt/86/86_12_t/861213...
| Quote: | In a short article to be published in an October issue of Inorganic Chemistry, Karl Criste of Rocketdyne Division of Rockwell International describes
a “chemical synthesis of elemental fluorine.” Christe first prepares potassium hexafluoromanganate (IV) and antimony pentafluoride by separate
nonelectrolytic methods from readily available starting materials:
2KMnO4 + 2KF + 10HF + 3H2O2 ---> 2K2MnF6 + 8H2O + 3O2
SbCl5 + 5HF ---> SbF5 + 5HCl
When these two reagents are heated together at 150 °C for 1 hour, nonelectrolytic “chemical” fluorine is readily obtained.
2K2MnF6 + 4SbF5 ---> 4KSbF6 + 2MnF3 + F2 |
So many hazardous chemicals.....
|
|
|
Theoretic
National Hazard
Posts: 776
Registered: 17-6-2003
Location: London, the Land of Sun, Summer and Snow
Member Is Offline
Mood: eating the souls of dust mites
|
|
My Soviet chemistry book (written in 1935, I have the 1965 thirteenth reedition, the author got a prize in 1935 for the coolest chemistry textbook
 ) states that MnF3 makes fluorine on heating above 250 C. Also it
tantalizingly states that in the prezence of excess HF, KMnO4 is reduced not to the II, but just to the III oxidation state. Could that be the holy
grail - KMnO4, HF, reduce with... I don't know, oxalic acid, to not have oxidation products in the way, then heat?
There is also an equation for MnF3 hydrolysis: 2MnF3 + H2O => MnO2 + MnF2 + 2HF. Since in concentrated solutions with loads of HF that
didproportionation hydrolysis doesn't happen, I have reason to believe it's reversible, otherwise MnF3 would eventually get totally
hydrolysed, HF or no HF. Colud this be an even holier grail?
There are othe methods of chemical F2 production, will post them later...  
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
