| Pages:
1
..
7
8
9
10
11 |
I Like Dots
Hazard to Self
Posts: 69
Registered: 10-4-2013
Member Is Offline
Mood: frisky
|
|
Well I dissolved a nickel in some vinegar/H2O2, then evaporated hoping to get pretty crystals. well I got some nice crystals but I noticed the
crystals were either blue, or green. With 2 different shapes. Green were more "diamond" shaped, and the blue were ehhh "more dimensional". here are
some pics.
I dont think they separated cleanly, but due to a slow evaporation they did separate to an extent.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Try sorting them out as best you can with tweezers, then recrystallize each batch again with distilled water.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
is the ratio of blue to green crystals anywhere close to blue75% green 25%?
[Edited on 10-18-2013 by cyanureeves]
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I haven't read the whole thread but would reduction with Al of Ni and Cu chlorides work to precipitate metal powders, wash in NaOH to get rid of
aluminum and then magnet to separate nickel?
|
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Random  | | I haven't read the whole thread but would reduction with Al of Ni and Cu chlorides work to precipitate metal powders, wash in NaOH to get rid of
aluminum and then magnet to separate nickel? |
No. I personally tried this and gave up quickly. The metals are too interleaved to even mill and sort with a magnet.
I'm catching up on the latest posts since I last checked. Glad to see there still seems to be some interest on this topic.
Tank
Chemical CURIOSITY KILLED THE CATalyst.
|
|
|
bismuthate
National Hazard
Posts: 803
Registered: 28-9-2013
Location: the island of stability
Member Is Offline
Mood: self reacting
|
|
Add a sodium thiosulfate solution to your Cu/Ni nitrate solution and heat gently. Copper sulfide should percipitate, filter and you are left with a
solution of Nickel thiosulfate and sodium nitrate. Add NaOH to the soution and filter the nickel hydroxide. Add the nickel hydroxide to the acid of
you choice and percipitate the nickle with aluminum.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
| Quote: Originally posted by bismuthate | | Add a sodium thiosulfate solution to your Cu/Ni nitrate solution and heat gently. Copper sulfide should percipitate, filter and you are left with a
solution of Nickel thiosulfate and sodium nitrate. Add NaOH to the soution and filter the nickel hydroxide. Add the nickel hydroxide to the acid of
you choice and percipitate the nickle with aluminum. |
Here's a reference for you:
Analytical chemistry, Volume 1
Frederick Pearson Treadwell
Wiley, 1921
In the case of silver thiosulfate, it looks unstable unless it is quickly dissolved in excess thiosulfate, forming a soluble complex. Ag2S is
precipitated on boiling in this case. CuS is precipitated upon boiling the acidified copper thiosulfate complex. I don't know the relative stability
of a complex with nickel thiosulfate in the same environment. If the idea works, then it might be necessary to acidify the solution first, and then
heat. Doing it the other way around might cause NiS to co-precipitate.
[Edited on 20-10-2013 by WGTR]
|
|
|
Zephyr
Hazard to Others
Posts: 341
Registered: 30-8-2013
Location: Seattle, WA
Member Is Offline
|
|
| Quote: Originally posted by The_Davster | Drive to Canada. Go to a bank. Ask for a brick of nickels (100$ worth) Those from 1955 to 1981 are pure nickel metal.
Naturally, only f you are after the metal, and not just looking for some chemistry to do... |
If you are searching for pure nickle, the Canadian quarter was pure nickle from 1999-1968.
|
|
|
cjevancich
Harmless
Posts: 5
Registered: 11-11-2013
Member Is Offline
Mood: No Mood
|
|
I was actually performing this experiment over the summer, and thought I'd add a few ideas I tried:
The first was to dissolve the alloy in either nitric acid or a mixture of sulfuric or hydrochloric acid and an oxidizer. It doesn't really matter,
because after this you mix the solution with sodium bicarbonate and filter it so that you can make a clean mixture of nickel and copper chloride using
HCl. It is important to do this because if you just use hydrochloric acid and an oxidizer, you can't use a reduction agent reliably (oxidizer will
tend to interfere).
Then after you have the clean mixture of chlorides, adding Ascorbic acid reduces the copper(II) chloride to insoluble copper(I) chloride. I didn't
like this method very much though because unless you're in a vacuum or inert gas environment, it readily becomes copper(II) chloride from the
atmosphere and from air entering the water you use.
Another solution I found interesting, but haven't perfected, is to use acetylsalicylic acid (Aspirin). Apparently aspirin will form copper aspirinate,
but nickel will not. I discovered that adding sodium aspirinate (made by adding sodium carbonate or bicarbonate to aspirin in water) to a mixture of
copper and nickel chlorides will precipitate the insoluble copper aspirinate. Adding ascorbic acid seems to precipitate any remaining aspirin from the
solution, leaving you with what should be nickel chloride.
Edit: I also had the idea to try and make a saturated solution of either the chlorides or sulfates and try a recrystallization, since the copper
chloride or sulfate would precipitate since it's the majority. I haven't tried it yet, but at the very least it should concentrate the nickel by
removing the copper.
[Edited on 11-11-2013 by cjevancich]
|
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
@cjevancich:
Some more details (if available) would be nice.. Something that can be tested and maybe reproduced by others.
I believe all of your points have been raised or attempted further upthread.
| Quote: | | Edit: I also had the idea to try and make a saturated solution of either the chlorides or sulfates and try a recrystallization, since the copper
chloride or sulfate would precipitate since it's the majority. I haven't tried it yet, but at the very least it should concentrate the nickel by
removing the copper. |
This I know has been done, albeit unintentionally, by Sedit and yours truly. Again, check upthread because as I recall, there was a good explanation
of the common ion effect by blogfast. Copper sulfate did precipitate first but according to Sedit, his solution still contained a lot of copper. I
never got around to testing my solution. Crystallization can probably be sped up by gently warming then cooling the concentrated sulfate solution
repeatedly (ugh..).
| Quote: | Run a stream of acytelene through the solution of copper/nickel nitrate then filter the solution.
Be warned this makes copper acetylide, a sensitive explosive. |
I'm still holding out hope for a simple-ish way to quantify the proportion of metals in solution (for analysis, not bulk separation). Bismuthate's
acetylene idea sounds good right about now and is reported and demonstrated to work with copper chloride as well.
Tank
Chemical CURIOSITY KILLED THE CATalyst.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
I use a scanning electron microscope (SEM) to quantize things around here, but why not precipitate out the respective sulfides, and
weigh those? Nickel and copper ions can be separated quite distinctly in this way.
|
|
|
woelen
|
Thread Split
13-11-2013 at 01:45 |
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Online
Mood: interested
|
|
Removed some crap from Ph.D.Chemist user.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i just dissolved some nickels in both hydrochloric acid and nitric acid and ran a stream of acetylene from my bottle.the nitrated cupronickel solution
has not reacted as i wanted with acetylene as nothing happened.the hydrochloric acid solution however looks promising because i ran acetylene through
it and also nothing but when i added ammonium hydroxide,the magic happened.i added ammonium hydroxide from ace hardware and it just disappeared into
the hydrochloric solution so i added more and just when i thought it was going to drop the hydroxides it turned blood red.i went this route after
watching the youtube video how to make copper acetylene.i added acetylene to the blood red solution and it has not settled yet. the hydrochloric
solution was made by dissolving nickels with 5volts in Hcl acid and removing the copper sponge so the red is what little copper is in solution.i do
not know how much nickel is in solution or in the removed sponge nor do i know if nickel will also drop as a hydroxide or remain in solution.i plan to
nickel plate with whatever is in solution because if it all precipitates i will be back to square one again with 0 for 0.
[Edited on 11-17-2013 by cyanureeves]
[Edited on 11-17-2013 by cyanureeves]
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Acetylene separation, very very promising, although extremely unsafe in larger quantity.
Here is a rough idea:
Electrolysing Cupronickel in ammonium chloride solution, adding ammonia and copper powder. Wait a few day and precipitate the copper I with acetylene,
filter the nickel solution and destroy the copper acetylide with strong hydrochloric acid. The nickle solution could be reduced to elemental nickel
probably.
I never asked for this.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
it has been a couple of hours now since the acetylene was bubbled through the Hcl acid solution and alot of red precipitate has developed and has
occupied half of the reaction flask.i now have half red precipitate and half blue solution which i wishfully think is the nickel ammonia complex.the
nitric solution did not work in the same manner because i added ammonium hydroxide to it and as all you here would probably guess,i got nickel and
copper hydroxide.RATS! Big Effing rats says johnny!
|
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
Interesting experiment @cyanureeves. From what you say, I deduce that the solution should be only slightly acidic (near neutral?) while bubbling
acetylene. Is that correct?
The only potential drawback I can think of at the moment is the addition of NH4 ions. It may not hinder anything, just something to keep in mind if
one wants a more refined product later..
I'm interested to know what you find after filtering off the copper acetylide (don't let it dry out completely). If possible, leave one part for
plating, another for dropping with aluminum, and another for.... whatever. lol More acetylene --> more precipitate? This would indicate incomplete
saturation/reaction on the first round.
Tank
Chemical CURIOSITY KILLED THE CATalyst.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
CR:
The nickel ammonia complex is a very specific colour, I wouldn't describe it as blue, more a kind of light purple. But Cu (I) does form a diammine
complex and believe it's blue (like its Cu(II) counter part).
Careful with that copper (I) acetylide: explosive when dry! Shock sensitive too...
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
correction DARK purple) is what the nitrated solution looks like which did actually
precipitate a jet black charcoal which i now have drying. nickel does indeed make up most of both left over blue and purple solutions because i
totally nickel plated a copper penny with both solutions. i added sodium carbonate to both and added a bit of Hcl acid to make the plating solutions
and both are effective. when carbon steel is immersed in the plating bath it will however draw out a little pink hue at first.adding some of the
ammoniated solutions give more nickel power but will add alot of soot that has to be rubbed off and then exposes the shiny nickel. i have two coffee
filters full of the precipitates drying but the red stuff is way,way more.seems every darn by product is volatile,from farts to bombs.i'll be careful.
@ tank, yes indeed i have some unadultered solution and it was exactly what i had in mind(mo gas) i didnt check the acidity i just went by color, you
cant miss it!it turns red before your eyes in a fraction of a second.one thing to note is that both precipitates are hard to clean off and messy as
hell!
[Edited on 11-17-2013 by cyanureeves]
[Edited on 11-17-2013 by cyanureeves]
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
If the red stuff is copper (I) acetylide that sounds rather a lot. At the risk of sounding like a broken record, be very careful with it. I would
decompose it with HCl if I were you: it has fulfilled its desired purpose but now isn't needed anymore.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
yes all i want is a nickel plating solution and have no desire for explosives but either way i did not make copper acetylide because my stuff does not
deflagrate. i probably did not have strong ammonia or acetylene was not enough but anyhow the precipitates have shrunk to about 1/4 it's original
mass.i have to be very careful that i do not intentionally make explosives or poisons for poison's sake.i think i owe it to all sciencemadness members
that i be responsible with what i learn here and everywhere.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
update: the solution containing what i thought was mostly nickel has a crapload of copper still because reduction with aluminum proves it.i get red
sponge just as if i used a battery and furthermore the untouched blue solution does not turn red with more acetylene nor with more ammonium
hydroxide.at this point i am stopping until i come up with some sort of bladder to keep the copper sponge on the aluminum away from the rest of
precipitates as i do the reduction.i swear explosives are the result of frustration stemming from failure and wars are all caused by copper.give
nickel a chance!
|
|
|
bismuthate
National Hazard
Posts: 803
Registered: 28-9-2013
Location: the island of stability
Member Is Offline
Mood: self reacting
|
|
Sorry it's not working. On the bright side I just realized we could percipitate 2CuI+I2 by adding KI. This seems to good to be true!
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
bismuthate when i said a crapload of copper i was exagerating a bit. the acetylene dropped more copper than i have ever before.i think i should have
added more ammonia or acetylene. acetylene and a bladder to filter the remaining copper will be my next attempt.the aluminum is actually turning black
rather than produce more sponge. thanx for your u2u. nickel or bust!or bust,or bust,or bust!
|
|
|
bismuthate
National Hazard
Posts: 803
Registered: 28-9-2013
Location: the island of stability
Member Is Offline
Mood: self reacting
|
|
Ok. Also after further research I found that my KI idea would not work...
but AlI3 should work to percipitate CuI.
|
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by cyanureeves | | update: the solution containing what i thought was mostly nickel has a crapload of copper still because reduction with aluminum proves it.
|
Not so fast cyanureeves.... What was your Al source? Check about half way down page 6 of this thread..
http://www.sciencemadness.org/talk/viewthread.php?tid=16811&...
I proved that Al foil (alloy) will give deceiving results. If you have access to a more pure Al source, you could rule out the above. If you don't,
then let us know how it behaves around a strong magnet, por favor.
Tank
Chemical CURIOSITY KILLED THE CATalyst.
|
|
|
| Pages:
1
..
7
8
9
10
11 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
