| Pages:
1
..
27
28
29
30
31
..
77 |
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
Yep, it's the famous silver tree. They're crystals. At the beginning they are needle shaped cristals up to 5 mm long, and as the reaction goes on,
branches of very small crystals form on the first crystals, so thin that light is absorbed or trapped in there so that's why the silver look so dark.
The dark very small crystals look like a powder tho. It is very fragile, actually it really looks like a tree, when you shake it a bit all the
"branches" move. If you shake it hard, it all falls.
In fact, if you shake it hard, it falls just like that :
 
Edit : put back the original photo for easier comparison
[Edited on 20-2-2015 by alexleyenda]
Help us build the Sciencemadness Wiki! Every question and tips about amateur chemistry two clicks away, wouldn't that be awesome?!
sciencemadness.org/smwiki
|
|
|
Zombie
Forum Hillbilly
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
It really is stunning. I guess you could compare the growth the a fractile.
To me, this is the coolest thread on the forum. It's inspiring.
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Quote: Originally posted by Zombie  | It really is stunning. I guess you could compare the growth the a fractile.
To me, this is the coolest thread on the forum. It's inspiring. |
I agree! I love all of the crystalline products here. By the way, nice title ("Forum Hillbilly") 
|
|
|
Zombie
Forum Hillbilly
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
| Quote: Originally posted by Zombie | It really is stunning. I guess you could compare the growth the a fractile.
To me, this is the coolest thread on the forum. It's inspiring. |
I see my use of a made up, quasi English language confirms the "Forum HillBilly" title.
Soooo embarrassing... 
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
For the first time in months I had a little free time, so I decided to extract cinnamaldehyde. Here are a few photos ; it has a red color under bright
light, a brown color under weak light, and a yellow color diluted in a little bit of ether. I got that ether (last photo) by condensation of ethanol
in conc. sulfuric acid at 145°C. That was clearly one of the most frightening reaction I have done :p
 
 
[Edited on 3-3-2015 by alexleyenda]
Help us build the Sciencemadness Wiki! Every question and tips about amateur chemistry two clicks away, wouldn't that be awesome?!
sciencemadness.org/smwiki
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
Very beautiful! I agree, distilling diethyl ether can be a bit nerve racking with its low auto ignition temp. Thanks for sharing.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Zombie
Forum Hillbilly
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
alexleyenda ,
Can you explain how that last reaction photo happened?
Was that all from a leaking join in the glassware?
Is it some sort of foam or crystalline?
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
|
gdflp
Super Moderator
Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline
Mood: Staring at code
|
|
| Quote: Originally posted by Zombie | alexleyenda ,
Can you explain how that last reaction photo happened?
Was that all from a leaking join in the glassware?
Is it some sort of foam or crystalline? |
It's a very rare thing called snow which you, being a lucky bastard in Florida,
would know nothing of right now unlike those of us who are up north. It reduces
the evaporation of the ether product.
|
|
|
Loptr
International Hazard
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
| Quote: Originally posted by Zombie | alexleyenda ,
Can you explain how that last reaction photo happened?
Was that all from a leaking join in the glassware?
Is it some sort of foam or crystalline? |
Lol. It's pretty contagious too as we just received over a foot and should be getting more on Thursday. The East Coast is getting buried.
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
| Quote: Originally posted by gdflp | | Quote: Originally posted by Zombie | alexleyenda ,
Can you explain how that last reaction photo happened?
Was that all from a leaking join in the glassware?
Is it some sort of foam or crystalline? |
It's a very rare thing called snow which you, being a lucky bastard in Florida,
would know nothing of right now unlike those of us who are up north. It reduces
the evaporation of the ether product. |
That would be a right answer hahaha. There was snow all round me so it was easier to take that than prepare an ice bath. Anyway the ice bath would
have become a real 100% ice bath if I had used that. I'm from Québec, Canada before you ask :p
Help us build the Sciencemadness Wiki! Every question and tips about amateur chemistry two clicks away, wouldn't that be awesome?!
sciencemadness.org/smwiki
|
|
|
fluorescence
Hazard to Others
Posts: 285
Registered: 11-11-2013
Member Is Offline
Mood: So cold outside
|
|
Not really sure what this is, I guess it is some form of
K6[Co2(CN)10]. If you treat Cobalt(II)-Solutions with a low amount of Cyanide you'll get Co(II)cyanide, analogous to
Nickel. If you continue to add more Cyanide the quite muddy looking thick brown cyanide goes into a green
[Co(CN)5H2O]3-. This compound is sensitive to oxygen, so you'll have to work in oxygen-free water and under inert
gas. I did it with regular destilled water and without any inert gas so the green complex wouldn't even build up and directly went into it's oxidized
from which is a reddish solution. I am not sure what the composition of that exactly is. But if you manage to get the green complex and add enough
Ethanol purple crystalls of K6[Co2(CN)10] should fall out. I did it with the red solution and the same happened. But
since most cyanides and cyano-compounds of heavy metals are insoluble in Ethanol this could be any other Co-Cyano-Salt.
The color still fits and perhaps the reddish color of the solution came from rests of Co(II)cyanide, could be. There is a Co(III)cyanide but that one
is blue, so this shouldn't be it, still this stuff reacts with water to a reddish Hydrate. Since the color of the crystals fit I'd rather go with
K6[Co2(CN)10]. It's hard to see but that stuff is actually the Cobalt Version von Potassium Ferrocyanide. You could
write it like that but data on the complex showed that it's rather written down as mentioned above.
Still quite interesting, the chemistry of Cobalt-Cyano-Complexes. Stay up for more in summer. I'm currently planing a whole bunch of d-Metal
complexes. Just went through a dozen of literature and still not finished yet. Till now it looks preatty cool and I'll try to make most of these
forgotten compounds, soon. The one mentioned here is an example from the cobalt section but there are far better ones.
So I hope you like it  .
EDIT:
So I isolated the brown-purple stuff and dissolved it in some water again and got a perfect yellow solution. That color is quite typical for the
Hexacyanocobaltate(III). That stuff is like the Iron version quite unreactive and should -according to literature - not react with Peroxide in any
way. I tried it and nothing happened. Co(II) and Cyanide can be boiled with oxygen for some time to get that stuff but it's quite cold in my lab and
that stuff still build up. So I'm not sure what the intermediate produrct was, there are some complexes mentioned with 5 cyano ligands and one other
like water or OH- depending on ration and amount of air. Could be one of them and this was oxidized while shaking it in the testtube with air to the
yellow Cobaltate(III). There is quite some stuff you can try out here especially when you work under argon.
[Edited on 4-3-2015 by fluorescence]
|
|
|
Zombie
Forum Hillbilly
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
| Quote: Originally posted by gdflp | | Quote: Originally posted by Zombie | alexleyenda ,
Can you explain how that last reaction photo happened?
Was that all from a leaking join in the glassware?
Is it some sort of foam or crystalline? |
It's a very rare thing called snow which you, being a lucky bastard in Florida,
would know nothing of right now unlike those of us who are up north. It reduces
the evaporation of the ether product. |
Oh yes. I have heard of this "snow".
Much like Mr. blogfast, and the mythical "thumper" i did not believe such a thing really existed.
Now I really feel stupid~~~~~
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
S=N-O-W
Tungsten (I) thionitrite
LoL
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Zombie
Forum Hillbilly
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
one nothing, plus one nothing, always equals two nothings, no matter what anyone says.
Sorry.
Infinite mass or perfect vacuum... take your pick.
[Edited on 3-5-2015 by Zombie]
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Infinite mass We've been getting a lot of snow in the mid-west of Ohio.
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
I just received a piece of Bismuth, nothing special but I always loved the look of shiny metallic shards of bismuth.
Help us build the Sciencemadness Wiki! Every question and tips about amateur chemistry two clicks away, wouldn't that be awesome?!
sciencemadness.org/smwiki
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Me too! Keep an eye on that piece - freshly broken, it's nice and silvery. But over time it oxidizes very slowly, and develops a yellow tinge.
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Nice picture! I was looking at SM today, and someone was looking over my shoulder; got a nice 'silver tree' discussion started with them because of
this page.
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
I prefer the cristalline Bismuth with fractalo-cubic-Maya-temple shape and petroleum iridescent colour
Bsimuth cristals images
I own quite a lot from mineral Bourses/Fairs/Saloon at relatively cheap prices.
Also from such places cristaline Silicium, cristaline Carborundum (SiC) and Quartz Gold Aqua (transparent colorless Quartz that turns pale blue owing
to gold atoms inserted into cristal latice by special rays), Quartz Titanium (the same but with Titanium...display metallic look with petrol
iridescence),...
[Edited on 7-3-2015 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
I love the way crystals is spelled in your link
I have a nice background picture for twitter, I think: https://twitter.com/volatilechemguy
|
|
|
Gooferking Science
Hazard to Self
Posts: 97
Registered: 17-7-2013
Location: Somewhere in Kansas, USA...
Member Is Offline
Mood: Halogenated
|
|
Mercury (I) Bromide
Just made this mercury (I) bromide. Fluoresces salmon color under UV light.
 
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
That's unique! I just made some copper(I) ferricyanide (Or ferrocyanide, I'm not entirely sure that the ferricyanide didn't get reduced...
|
|
|
alexleyenda
Hazard to Others
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
That sounds like dangerous stuff, but I like the colors :p
Help us build the Sciencemadness Wiki! Every question and tips about amateur chemistry two clicks away, wouldn't that be awesome?!
sciencemadness.org/smwiki
|
|
|
Jimmymajesty
Hazard to Others
Posts: 153
Registered: 9-7-2009
Member Is Offline
Mood: No Mood
|
|
Mg+NaCl thermite
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Winner of the conflagrations competition (and about ten bucks) except that you didn't enter.
Nice photo. Well done.
|
|
|
| Pages:
1
..
27
28
29
30
31
..
77 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
