Diablo735
Harmless
Posts: 10
Registered: 8-8-2006
Location: Canada
Member Is Offline
Mood: No Mood
|
|
Anti-Glare material production/acquisition.
Does anyone know where to get or how to make anti-glare material? Though is it possible to do this at home?
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Depends on what anti-glare means,
One type is a micro-rough coating that makes the surface matt, reducing specular refection. For applications you can get a spray-on coating.
Another is partially absorbing films. These often combine fairly low reflectivity of their own with reduction of the intentsity of light passing
yhrough them, which reduces the brightness of reflection.
Yet another is the anti-reflection coatings used on lenses and other optics. These are multi-layer coatings of graded refractive index, reducing the
mismatch between air and lens. Generally this would be difficult to do at home.
http://en.wikipedia.org/wiki/Anti-reflective_coating
|
|
Diablo735
Harmless
Posts: 10
Registered: 8-8-2006
Location: Canada
Member Is Offline
Mood: No Mood
|
|
Thank you for your help but I already glanced through that page before posting, found it difficult to find what I could use to make a surface
non-reflective. I am wondering if I can add a non-reflective coating, at home, to a pair of binoculors.
|
|
Twospoons
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1314
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
To what end? If all you are trying to do is not be seen by someone else when you are using them then all you have to do is stretch some black
pantyhose over the front.
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|