| Pages:
1
2 |
LoKi
Harmless
Posts: 27
Registered: 27-2-2007
Location: the state of denial
Member Is Offline
Mood: manic
|
|
pyridine prep help
I was wondering if anyone had any ideas for a Pyridine prep. I remember reading a text saying that the general procedure for producing
pyridines was the Haantz reaction? I don't remember the name off the top of my head, but I know that it gave shit other than simple pyridine.
there was a variation that gave some sort of 3,5 substituted pyridine. Thats great and all but what about simple old pyridine? Would it be possible
to cleave the ethers or alkyl chains or whatever it was sticking off? The pyridine ring is pretty strong if I remember correctly, so I guess you
could subject it to all kinds of torture. I know, I oughta look up the reaction and be specific instead of pulling this info out my ass, but I'm
tired and about to go to bed, and I think I got my point across. Apologies for typos and nonsensical ramblings. Like I said, I'm REAL tired.
Anyway, any help would be greatly appreciated.
\"They who can give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety.\"
-- Benjamin Franklin
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
I will look into this for you. Never really considered it before, pyridine being an easy chemical to buy.
Niacin (nicotinamide) is also easy to buy and you can decarboxylate it, it is pyridine-3-carboxamide.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Conversion of niacin (nicotinamide) to pyridine sounds like an interesting synthesis for the home chemist. This presumes that one can isolate the
nicotinamide in sufficient purity from the OTC niacin concoctions. It should then be readily convertible to nicotinic acid utilizing HCl.
Could the nicotinic acid then be decarboxylated to pyridine in the same way benzoic acid is decarboxylated to benzene?
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
This has been discussed in detail on a site long gone from the internet. Psyloxy did most of the legwork  It's not practical, see:
http://www.korbis-labor.de/experimente/carbonsaeuren/darstel...
1.5 g nicotinic acid and 2.5 g CaCO3, when heated to decarboxylation with a bunsen burner give 0.3 mL pyridine not worth the hassle, nicotinic acid is
also quite expensive.
There's Patent DE944251:
Example 2
A solution of 200 parts 1,5-pentanedial in 800 parts 3% sulfuric acid is added, over the course of 2 h, to a boiling solution of 1100 parts
crystallized Fe2(SO4)3 and 200 parts (NH4)2SO4 in 1500 parts water. Workup as in example 1 yields 82% pure pyridine.
workup as in example 1: rxn-mixture is made alkaline and the aromatic base is distilled off.
The dehydrogenation of piperidine forming pyridine can be carried out either by heating to 300° with concentrated sulphuric acid, or with
nitrobenzene at 200°; or with silver acetate in acetic acid.
[Edited on 28-2-2007 by leu]
Attachment: Pyridine_and_Pyridine_Derivates.pdf (979kB)
This file has been downloaded 104459 times
Chemistry is our Covalent Bond
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
A lot more people are interested in making piperidine than in making pyridine.
This includes making piperidine from pyridine (which is rather easy).
|
|
|
guy
National Hazard
Posts: 982
Registered: 14-4-2004
Location: California, USA
Member Is Offline
Mood: Catalytic!
|
|
Aldol condensation of formaldehyde with acetone(should have vrey good yield since formaldehyde is a good electrophile). Then add ammonia(conjugate
addition + intramolecular cylclization) = piperdone. Reduce the carbonyl = piperidine. Looks good on paper.
[Edited on 2/28/2007 by guy]
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Piperidine
Generally you cyclize something like 5-aminopentyl bromide or similar 5-carbon backbone, it's not that tough.
However if you have a ready supply of pyridine, then reducing it with sodium in ethanol is easier. This also assumes you have a lot of sodium or can
get it.
I use dilute piperidine soln for global deprotection of Fmoc peptides as it works a lot better than NMM (N-Methylmorpholine.)
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
An old preparation of piperidine is by heating pentamethylenediamine hydrochloride (cadaverine); which is the result of putrefactive enzymes on
lysine; ii's quite toxic in addition to being very obnoxious, but the hydrochloride salt isn't so toxic  An alternative synthesis can be found in Ber 56 625-30 (1926):
Attachment: putochin.zip (67kB)
This file has been downloaded 678 times
Chemistry is our Covalent Bond
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Thanks, @leu
Cadaverine is very expensive. It is classed as corrosive, nothing special is said about toxicity. Acros wants $10 a gram for it and does not have more
than 25 g bottles.
On the other hand, the corresponding glycol is cheap and sold by the Kg ($66) so building the diamine from that via the dihalide would be easy.
Another related route might employ tetrahydropyran, but it is about 50% more expensive than the glycol, and being an ether will be prone to peroxide
formation. The transformation to the open chain glycol would be similar to taking THF to BDO.
Incidentally these N and O saturated heterocycles sometimes do odd things.
When one of the Big Pharmas was developing Ditran as an experimental psychiatric drug they had this problem.
Ditran was a an ester of a tetrahydrofurfuryl carboxylic acid. They started with tetrahydrofurfuryl alcohol, an agricultural byproduct from Quaker
Oats mostly. Made the bromide then the amine. But when this was distilled they didn't obtain the single pure tetrahydrofurfurylamine, they got a
mixture of it with 3-hydroxypiperidine. The furan ring had opened, and the open chain intermediate reclosed as the six membered imine.
This observation led to the development of the 3-quinuclidinyl benzilates (BZ etc).
That piperidine ring is really very favored, chemically.
[Edited on 28-2-2007 by Sauron]
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Hmmm ... adipic acid, if you don't have a direct source then the hydrolysis of nylon-6-6 will yield it and the matching C6-diamine, convert to the
diammonium salt, heat to form the cyclic amide, treat with NaOCl giving 5-amino-pentanoic acid. That should cyclicize to the amide, 6 member rings
being favoured. Reduce the amide to piperidine.
Hexamethylene diamine is similar to cadaverine, maybe a bit less stinky. If you xan put together a setup to avoid the escape of the diamine and don't
live well away from other people, acid hydrolysis is advisable to keep the diamine as the salt.
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
I think I'll stick to Na/EtOH redn of Pyridine...
Cadaverine does sound like the Smell-O-Rama version of Jeepers Creepers. Ugh.
|
|
|
LoKi
Harmless
Posts: 27
Registered: 27-2-2007
Location: the state of denial
Member Is Offline
Mood: manic
|
|
I didn't realize pyridine was easy to come by. I seem to remember hearing it was watched, but not listed. The niacin decarboxylation looks
interesting, I'll give it a shot and see how it goes. Fairly pure niacin should be available from several vitamin retailers. Guy- that aldol
condensation sounds a lot like that Hantzsch Pyridine Synthesis that I had mentioned. Thanks so much for help, fellas.
\"They who can give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety.\"
-- Benjamin Franklin
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
"watched but not listed" is just druggie paranoia. Look at all the totally irrational stuff on their lists, and ask yourself whether or not they would
deliberately leave off anything they thought was significant?
These are the folks who banned Red Devil lye remember.
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
| Quote: | Originally posted by Sauron
These are the folks who banned Red Devil lye remember. |
Which is not listed, and so a specific example of something left off the list that is thought to be significant.
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Well, then I was wrong because they haven't banned Red Devil lye, but, you can also bet your ass that there's no DEA agent lurking in every
supermarket, 7-11 and hardware store checking on who buys drain cleaner.
It's ridiculous. It's a waste of manpower, and unproductive.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Not drain cleaner but my local hardware store requires that the buyer provide his name, signature, and driver's license number when buying acetone,
toluene, and another solvent that I can't remember. This is kept on a log sheet. I don't think this was inspired by the DEA but likely by the local
constabulary. Ridiculousness is not a factor.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Maybe I am old fashioned, but, if a clerk in a hardware store was arrogant enough to ask me (a paying customer, and not at all up to no good) for all
that just to buy a tin of a common solvent (toluene = paint remover, acetone = degreaser) I would walk out and find another store. If the county
Mounties mandated that I'd drive to a county where they still respected the privacy of honest citizens.
It IS ridiculous.
If the stuff is so hazardous to the public safety by virtue of the assholery of meth cooks, jihadis, whatever, take it off the store shelves. But if
it is available to the public, OTC, then by God it is nobody's business who buys it and the gubbiment ought not to be turning counter clerks into
spies and snoops.
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
I'd be like suuuuuurrrrrreeeeee... put my name on the log.
After you raided 99.9% of the persons on the list, you MIGHT get one meth cook... wait though.. I'm thinking that was BEFORE the pseudoephedrine
restrictions...
Those logs are useless nowadays. Pure scare tactic is all it is.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
My comment on "ridiculousness" was poorly worded. Of course it is ridiculous. What I was trying to say is that LE and the store management don't let
that fact stop them.
The clerks are not arrogant. They are merely minimum wage pawns in this farce that need to keep their jobs.
I don't buy solvents at that hardware store anymore. I drive 5 miles down the road and give my business to their competitor who fortunately doesn't
care to play these silly games.
And yes, Lurker, this has all been made moot by the bans on OTC pseudoephedrine anyway. It simply is just intimidation of the innocent.
[Edited on 1-3-2007 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Of course we are all preaching to the choir.
And you are doing just what I said I'd do, go buy somewhere less nosy.
Sure the clerk is just doing what he's told. Unless the clerk is the owner, and then he's doing what he chooses, I don't think local LE can force him
to do this, so it's his choice and that would make him arrogant.
Does 5 miles away get you across a county line, or out of city limits? How local is local?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Rather than call the store management (or owner) "arrogant," I would call them politically correct wimps.
No, 5 miles is still in the city. But the owner is local, old, and crusty, and has apparently chosen not cave in to this bullshit busywork that LE
wanted to foist on him.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Okay maybe arrogant is not quite right, but, presumptuous. If I go buy a wrench the seller doesn't ark me what I want it for. All the same, tool, or
supply like degreaser or paint remover. Those stores are there to sell such things and not to collect names for the Nanny State.
I have nothing at all to hide but I would go a lot farther than five miles to get away from that sort of intrusion into my privacy and I would not
give that place of business one dollar of my trade, ever again, for any reason.
Good on your crusty old shopkeeper, I bet we'd see eye to eye.
|
|
|
LoKi
Harmless
Posts: 27
Registered: 27-2-2007
Location: the state of denial
Member Is Offline
Mood: manic
|
|
I really have nothing to hide either, but having the city's finest rummaging through my makeshift and very fragile lab is the last thing I want, which
is why I would rather make my own reagents if they can't be bought at the hardware store or online. Maybe once my balls will drop and I'll try to
purchase my supplies at the local chem distributor. I certainly don't want to fill out an "intended use" form or whatever they call it. Most of the
things I buy, I buy only with a vague idea about what I'll use it for. I just want to try different reactions and learn the trade and gain
experience. Speaking of filling out forms at stores, a law was recently passed in my state requiring strict records of psuedoephedrine, ephedrine,
and PPA to be kept by all retailers. ID's are to be shown, addresses recorded, signatures, the whole nine yards. There is also a buying limit of
something like 2 boxes a month. Working at a pharmacy, I hear stories about the DEA bitching like, well, a bitch, when the kids at the register don't
follow their regulations to the letter. It's disgusting, and meth isn't even a problem here. I looked up the statistics, there has been ONE meth
found in this county, ever. Statewide meth use and manufactor statistics are relatively low as well.
\"They who can give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety.\"
-- Benjamin Franklin
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
However, I assume you do not feel deprived by not being able to buy ephedrine, psuedoephedrine, or PPA? I know I don't.
1. I would not stop me from doing chemistry in the slightest.
2. It would not stop me from making methamphetamine if I was so inclined, either, because there are beaucoup ways to do that which have nothing to do
with ephedrine, psuedoephedrine, or PPA.
So you see, that measure ONLY affects meth cooks who were using those immediate precursors in that particular route or two.
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
| Quote: | Originally posted by Sauron
So you see, that measure ONLY affects meth cooks who were using those immediate precursors in that particular route or two. |
Or those who actually want a decongestant. From what I hear, the replacement chemical doesn't work.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
