Pages:
1
2 |
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
I have prepared a small amount of TeNM via the Ac2O/HNO3 method. I tried mixing a small amount of it with the calculated amount of toluene for oxygen
balance, then absorbed a drop of it in tissue paper and hit it with a hammer. It detonated much like NG from this treatment.
I wore a gas mask which didn't cover my eyes and the vapours from the TeNM stung quite a lot. I quickly determined the evaporation rate to find out
how much could be hanging around the lab ( which was very little; much less than the permitted concentration level when diluted to lab volume ). In
the end I got so paranoid about poisoning hazards that I took all of it outside and let it evaporate on its own.
|
|
Engager
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 295
Registered: 8-1-2006
Location: Moscow, Russia
Member Is Offline
Mood: Lagrangian
|
|
Quote: | Originally posted by Microtek
I have prepared a small amount of TeNM via the Ac2O/HNO3 method. I tried mixing a small amount of it with the calculated amount of toluene for oxygen
balance, then absorbed a drop of it in tissue paper and hit it with a hammer. It detonated much like NG from this treatment.
I wore a gas mask which didn't cover my eyes and the vapours from the TeNM stung quite a lot. I quickly determined the evaporation rate to find out
how much could be hanging around the lab ( which was very little; much less than the permitted concentration level when diluted to lab volume ). In
the end I got so paranoid about poisoning hazards that I took all of it outside and let it evaporate on its own. |
How much of TNM did you made, and what is found evaporation rate? Today i've prepared HNO3/Ac2O mixture witch will produce TNM on standing, but i'm
seriously worried about high toxicity, so actual evaporation rate digits can help me to make it more safe.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
I made maybe 20 ml. I can't remember what the actual numbers were, but I had removed a sample and kept it in a small vial for testing. When it started
stinging, I placed the vial with contents on my laboratory scale and monitored weight loss over 60 seconds, then computed possible concentration
levels based on the period I had it open. IIRC just a few milligrams evaporated over the course of one minute, but obviously that will vary depending
on temp and surface area, etc. I would estimate (I'm working from memory here) that the vial I used was about 1.5-2 cm in diameter.
Incidentally, I didn't suffer any ill effects at all (except the stinging eyes), but I have such an active imagination that the suspicion of poisoning
is enough to make me physically ill. That's why I discarded the rest without doing anything with it, even though I was going to convert it to
trinitromethane and then experiment with all sorts of nitroform condensates.
|
|
Engager
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 295
Registered: 8-1-2006
Location: Moscow, Russia
Member Is Offline
Mood: Lagrangian
|
|
Preparation of tetranitromethane from acetic anhydride & nitric
acid
Procedure:
Flat bottom flask with 500 ml capacity is filled with 63g (1 mol) of 99% nitric acid and placed on ice bath, then
102g (1 mol) of acetic anhydride is added by small portions with efficient stirring, not allowing temperature to rise above 10C (#1). After all nitric
acid is added, neck of the flask is thoroughly dried with bath towel and flask is capped with small glass turned upside down. Mixture is allowed to
stand in ice bath until it will heat up to room temperature, then reaction flask is removed from water bath and allowed to stand at room temperature
for 7 days (#2). Mixture is poured to 600 ml of cold water, carefully stirred and heavy oily layer of tetranitromethane is separated in separation
funnel. Crude product is washed with pure water until acid-free, with 15 ml of 40% sulfuric acid and then dried by careful washing with 10 ml of
concentrated H2SO4 (#3), to get about 18 ml (29g) of pure tetranitromethane with melting point at 13.9C. Yield is ~60% from theory (#4).
Notes:
1. Temperature of reaction mixture must be kept below 10C at all times (above this
temperature reaction speed up greatly). Reaction at the beginning of addition is strongly exothermic and acetic anhydride must be added by small
portions (0.5 ml). Then about 10 ml of acetic anhydride is added, exotherm is reduced and portions can be slowly increased from 1 to 10 ml. After
addition is complete mixture must be allowed to sit in ice/water bath, slowly heating up to room temperature. If cooling during first several hours is
removed, violent exothermic process can start and at 30-35C mixture must be immediately poured to emergency drain with large amount of cold
water.
2. On mixture aging slow reactions takes place, at first trinitroacetic acid is
formed and is decarboxylated to nitroform evolving carbon dioxide, then nitroform is slowly nitrated to form tetranitromethane. Contamination by
nitroform can be clearly evidented by intense yellow coloration of water layer, then tetranitromethane is separated from reacted mixture. Different
sources mention different aging periods, but 7 days at room temperature found to be most common in references.
3. Occasional batches of tetranitromethane were found to evolve considerable heat
and turn black if allowed to stand over concentrated sulfuric acid for longer then 10-15 minutes. So actual contact time must be minimized, and
tetranitromethane must be separated on separation funnel as soon as possible.
4. Some literature sources mention higher yields on other aging time and
temperatures. Some sources mention use of catalysts and chipped glass to improve yield of this reaction, however those statements are unconfirmed in
later publications.
Photos:
[Edited on 27-3-2009 by Engager]
|
|
Anders Hoveland
Banned
Posts: 208
Registered: 15-6-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by photoguy ![](images/xpblue/lastpost.gif) | I know that Isopropanone vapour in direct contact with Nitric Acid fumes can create trinitromethane - so I wonder if trinitromethane can be further
nitrated to be Tetranitromethane?? I don't know if this is even remotely possiable... |
Trinitromethane is acidic, and forms powerful, but very stable nitroformate salts with NH4OH or amines. I am unsure what "Isopropanone" is. Do you
mean acetone?
Could someone characterize hydroxylamine nitroformate? It should be better than NH4ClO4 for solid rocket oxidizer.
|
|
The WiZard is In
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1617
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by BromicAcid ![](images/xpblue/lastpost.gif) | I've read that it forms quite explosive mixtures with toluene as this quote illustrates "When mixed with hydrocarbons in approximately stoicheiometric
proportion a sensitive highly explosive mixture is formed.... Explosion of only 10 g of a mixture with toluene caused 10 deaths and severe
injuries..." (Stettbacher, A., Tech. Ind, Schwetz. Chem.) " |
In 1920 at the University of Münster a massive iron gas
burner containing a residue of 10 grams of tetranitromethane
and toluene mixture decomposed suddenly. The detonation
splintered the container, and of 300 students in the area,
10 were killed and 20 injured!
Several secondary references. Primary reference not seen
by me:
Zeitschrift für das Gesamte Schiess- und Sprengstoffwesen
25:439 1930
Weird - this discussion has gone of for 7-years, yet — no one
noted that Urban'ski has all that you need to know 'bout TNM.
For more recent methods of synthesis see Köhler and Meyer.
Chattaway's method (Patented by Farbenfabriken vorm. F. Bayer
and Company), J. Chem Soc. CCXX 2101 (1910) is described in detail
in good old —Capt. E. de W. S. Colver, High Explosives, Crosby
Lockwood and Son. London 1918. A somewhat hard to find book,
I do not remember where I purchased my copy. It maybe easier
to look up the J Chem. Soc. And ... if I was working on energetic
materials I would want to read the original reference, and check
following volumes for additions/corrections!
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Trinitromethane thread is here _
http://www.sciencemadness.org/talk/viewthread.php?tid=3061
attached references for both
Attachment: Nitroform Tetranitromethane & derivitive compounds .txt (11kB) This file has been downloaded 1565 times
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Tetranitromethane has been obtained from iodopicrin I3CNO2 and silver nitrite AgNO2.
Hantzsh, Chemische Berichte, 39, p2478, (year 1906)
|
|
The WiZard is In
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1617
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
From Köhler and Meyer
Tetranitromethane
Tetranitromethan; t´ etranitrom´ethane; TNM
colorless liquid with a pungent smell
empirical formula: CN4O8
molecular weight: 196.0
energy of formation: +65.0 kcal/kg = +272.1 kJ/kg
enthalpy of formation: +46.9 kcal/kg = +196.4 kJ/kg
oxygen balance: +49.0%
nitrogen content: 28.59%
volume of explosion gases: 685 l/kg
heat of explosion*): 526 kcal/kg = 2200 kJ/kg
specific energy: 69.1 mt/kg = 677 kJ/kg
density: 1.6377 g/cm3
solidification point: 13.75 °C = 56.75 °F
boiling point: 126 °C = 259 °F vapor pressure
Pressure Temperature
millibar °C °F
12 20 68
57 50 122
420 100 212
1010 126 259 (boiling
point)
detonation velocity, confined:
6360 m/s = 20 900 ft/s at r = 1.637 g/cm3
* The presence of small amounts of impurities may easily increase the experimental value to above 1000 kcal/kg.
Tetranitromethane is insoluble in water, but soluble in alcohol and ether. The volatile compound strongly attacks the lungs. The oxygen rich
derivative is not explosive by itself, but forms highly brisant mixtures with hydrocarbons such as toluene. Tetranitromethane is formed as a
by-product during nitration of aromatic hydrocarbons with concentrated acids at high temperatures, following opening of the ring. It can also be
prepared by reacting acetylene with nitric acid in the presence of mercury nitrate as a catalyst. According to a more recent method, tetranitromethane
is prepared by introducing a slow stream of ketene into cooled 100% nitric acid. When the reaction mixture is poured into ice water,
tetranitromethane separates out.
Mixtures of tetranitromethane with organic fuels are very sensitive to impact and friction and may react spontaneously by detonation or fast
deflagration.
R. Meyer
J. Köhler
A. Homburg
Explosives
6th Ed
----------
Patented Oct. 13, 1936
2,057,076
UNITED STATES PATENT OFFICE
2,057,076
PREPARATION OF TETRANITROMETHANE
Joseph A. Wyler, Allentown, Pa., assignor to Trojan Powder Company.
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
some non-scientific sources on the internet claim that nitromethane transforms into dinitromethane from exposure to UV light, but this could just be a
perpetuated myth among the non-scientific community of racers and hobbyists.
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Some people have suggested that tetranitromethane might be easily made through halogen substition. For example,
CCl4 + 4 NaNO2 --> C(NO2)4 + 4 NaCl
Unfortunately, it is not that easy. The above reaction would not work for three reasons.
First, chlorine does not substitute off carbon atoms very readily. Such reactions are very slow, and typically require nearly a whole 30 days to go to
completion. (there do however exist certain complexed copper catalysts that can speed up the reaction to only a few hours)
Bromine and iodine substitute off much more easily.
Second, especially in light of the fact that the reaction is so slow, the two reactants would need to be mixed together. That is going to be
problematic, because NaNO2 is water soluble, whereas CCl4 is oil soluble. There are not many solvents that can dissolve both. One of the few that can
is propylene carbonate, which you would have to prepare yourself. Another idea would be to make lithium nitrite, which is soluble in ethyl ether, and
simply mix with CBr4. Yet another idea would be to mix NaNO2 with carbon tetraiodide, CI4, using acetone as a solvent. Unusually, NaI is actually
soluble in acetone. So the solid NaNO2 (which would not dissolve) could react with the CI4 dissolved in acetone to form NaI, which would also dissolve
in the acetone. It is important that the NaI dissolves, otherwise it would form a protective layer over the solid particles of NaNO2, which would
prevent the reaction from happening.
Third, forming nitro groups by substituting nitrites is problematic. It gives low yields, especially when you are trying to put more than one nitro
group on a molecule. Such yields would be expected to be low, less than 11%, since nitrite substitution on secondary and tertiary haloalkanes gives
successively lower yields than a primary haloalkane because a small proportion of nitrite gets substituted instead of nitro groups, which in this case
would lead to degradation of the molecules with such undesirable substitutions. When subsituting only one halogen group, such as iodomethane, a small
portion of methyl nitrite results as an undesirable byproduct, but when three or more halogens are being substituted, accidental addition of even one
nitrite group will lead to hydrolysis of the unstable molecule, even if the other two halogens have successfully been replaced with nitro groups.
Formic acid, or carbon dioxide , will form.
Furthermore, tetranitromethane is somewhat thermally unstable, especially in hydrocarbon solvents. It is also extremely dangerous to heat
tetranitromethane, since it forms sensitive explosive mixtures with hydrocarbons. Therefore it is unlikely that tetranitromethane could be directly
prepared from any reaction that involves refluxing or heating.
Here is a summary of possible ways to make tetranitromethane through halogen substitution.
CBr4 (or CI4) with AgNO2, using benzene solvent.
AgBr will solidify out.
CBr4 (or CI4) with NaNO2, using propylene carbonate solvent
CBr4 (or CI4) with LiNO2, using ethyl ether solvent
CI4 with NaNO2, using acetone as a solvent.
The solid NaNO2 will slowly react into the solvent, the NaI that forms is soluble.
In the above reactions, yields will likely be less than 8 percent, the remaining CBr4 will be oxidized to CO2.
Bromoform CHBr3 (or CHI3) could be used instead in the above reactions, this would give improved yields (since only 3 nitro groups are being
substituted on instead of 4). The trinitromethane that then forms could be dissolved in excess methylene chloride (for safety), and nitrated to
tetranitromethane.
Carbon tetrachloride (or chloroform CHCl3) can alternatively be used to prepare carbon tetraiodide (or to prepare iodoform) by reaction with sodium
iodide. This requires a special catalyst. This catalyst is basically copper(I) iodide complexed to ethylene diamine, or more preferably
CH3NHCH2CH2NHCH3. 1,2-diaminobenzene can also be used instead. The reaction needs to be refluxed at 110degC for 8 hours. Butanol, dioxane, or DMF can
be used as the solvent.
Bromoform CHBr3 can be prepared similar to chloroform. Either ethanol or acetone is mixed with NaOH, then bromine is slowly added. Unlike with the
chloroform reaction, it is better to minimize the percentage of water in the reaction, because bromoform gradually hydrolyses with water (actually
chloroform slowly does also but the reaction takes many days)
|
|
VladimirLem
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 204
Registered: 24-5-2010
Member Is Offline
Mood: Have no fear <Vlad> is here.
|
|
Hi guys
I've got a question
Pure Tetranitromethane is said to have a VoD of around 6400m/s (at ~1.6g/cm3)
But some sources say that the mixture of TeNM+Toluene got up to 9300m/s (and that with a lower desnity - sure, cause of the Toluene - 0.86g/ml)
Is it "similar" to anfo - where pure Ammoniumnitrate just got a VoD of around 1800m/s and mixed with oil, up to 3500?
How the hell can that be?
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Tetranitromethane mixed with some toluene is more energetic, because the toluene can be burned off by the extra oxygen in the tetranitromethane.
When tetranitromethane explodes, it produces extra oxygen.
C(NO2)4 --> CO2 + (2)N2 + (3)O2
More energy can be produced if the oxygen can be used to burn some other fuel.
|
|
VladimirLem
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 204
Registered: 24-5-2010
Member Is Offline
Mood: Have no fear <Vlad> is here.
|
|
Quote: Originally posted by AndersHoveland ![](images/xpblue/lastpost.gif) | Tetranitromethane mixed with some toluene is more energetic, because the toluene can be burned off by the extra oxygen in the tetranitromethane.
When tetranitromethane explodes, it produces extra oxygen.
C(NO2)4 --> CO2 + (2)N2 + (3)O2
More energy can be produced if the oxygen can be used to burn some other fuel. |
interesting stuff...
- I know, TNM got an awsome OB of +72 but does that theoretical work at every (solid) explosive (with +OB) mixed with fuels (like toluene/ethanol/oil)
?
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Tetranitromethane gives off extremely poisonous vapors. It is so poisonous, it was one time considered for use as a chemical weapon. At least
trinitromethane is much less poisonous.
Trinitromethane toxicity: 800 mg/m3/2 hour Inhalation Mouse LC50,
Tetranitromethane toxicity: 1230ppm (for 36min, LC50)
Mixtures of tetranitromethane and fuel are very sensitive explosives, and the mixtures are not thermally stable, which means that the
tetranitromethane slowly decomposes at room temperature, giving off nitrogen dioxide.
For trinitromethane with hydrocarbon fuels, the mixtures quickly decompose above 100degC, and the decomposition can lead to detonation. No doubt
tetranitromethane mixtures are even less stable.
Tetranitromethane REACTS with toluene at room temperature
Tetranitromethane actually reacts with phenol, to form nitrophenol and trinitromethane in 100% yield. (at 30degC in water). At higher pH, nitrite is
also results.
"Reaction of Tetranitromethane. I. Kinetics and Mechanism of Nitration of Phenols by Tetranitromethane."
Thomas C. Bruice, Maurics J. Gregory, Saundra L. Walters
So tetranitromethane likely reacts with toluene in similar way also. Therefore, it may likely be somewhat pointless to mix tetranitromethane into
toluene. Perhaps better just to mix mononitrotoluene with trinitromethane, because that is what the resulting mix will contain either way.
[Edited on 26-9-2011 by AndersHoveland]
|
|
VladimirLem
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 204
Registered: 24-5-2010
Member Is Offline
Mood: Have no fear <Vlad> is here.
|
|
Quote: Originally posted by AndersHoveland ![](images/xpblue/lastpost.gif) |
So tetranitromethane likely reacts with toluene in similar way also. Therefore, it may likely be somewhat pointless to mix tetranitromethane into
toluene. Perhaps better just to mix mononitrotoluene with trinitromethane, because that is what the resulting mix will contain either way.
[Edited on 26-9-2011 by AndersHoveland] |
hm...ok...
"In actual practice a mixture of 80% ammonium nitrate and 20% TNT by weight yields an oxygen balance of +1%, the best properties of all mixtures,
and an increase in strength of 30% over TNT."
Source
No way ! The 80/20 compound will bei 30% more powerfull than pure TNT (at same weight) ?
And dont worry, i'm not going to make T(e/r)NM ![;)](./images/smilies/wink.gif)
|
|
Pages:
1
2 |