| Pages:
1
2 |
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
Stabilizing Nitrogen Tri-iodide
I searched on this a little and even if I did findd sometihng, I was still going to ask to get an input from you guys. I would like to know if there
is a way to stabilize nitrogen tri-iodide. I heard that to make it less sensitive when it is wet, it needs more ammonia but I am not very concerned
with that. I would like to know if there is a way to handle nitrogen tri-iodide safely. Well, is there?
|
|
|
Blind Angel
National Hazard
Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline
Mood: Meh!
|
|
my chemistery knowledge aren't the highest but maybe mixing it with something solid like Styrofoam + Gaz (dunno the real name in English sorry) would
help?
/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED |
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
that's a crappy (I don't even know if it's real) napalm. That's what I'm saying... you cant mix it.... if a little fly goes on it, it'll detonate. I'm
asking if there is anything that can be added while you are making it.
|
|
|
a_bab
Hazard to Others
Posts: 458
Registered: 15-9-2002
Member Is Offline
Mood: Angry !!!!!111111...2?!
|
|
You can's stabilize it. It'll decompose really fast and even when wet it can explode. I had an accident involving NI3 when some exploded under water !
the beaker was turned into dust. I wasn't there, but I was worried about the neighbours, because the explosion was loud. That day was one od the worse
in my life, expecting the pigs due to a reclamation...It wasn't the case though.
Still there is some document which describes quite a lot of interesting things about how to make it, or how to keep it. The author used some starch to
decrease it's sensitivity.
|
|
|
Darkfire
Hazard to Others
Posts: 292
Registered: 3-1-2003
Location: California
Member Is Offline
Mood: Wondering
|
|
I HIGHLY sugest you dont do NI3 dues, you need much more knowage on explosives and general chemistry before even apemting ni3, there is no way to
stablise it; only thing that might come close is adding activate carbon to the nutralised ni3 bearing solution to help reduce the chance of
predetonation, thats only a geuss so dont quote me on it.
CTR
|
|
|
Ramiel
Vicious like a ferret
Posts: 484
Registered: 19-8-2002
Location: Room at the Back, Australia
Member Is Offline
Mood: Semi-demented
|
|
I have found that if it is still wet with an ammonia solution, or the crystals are not dry, it is considerably harder to detonate (i was stomping on
it, and it wouldn't go off). You may have problems with this method, however, since it is also my experience that the crystals dry out easily within
24 hours at ~50% humidity and room temp.
Don't make 'em. I get sick to the stomach these days if i even smell the stuff.
Caveat Orator
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
I wasn't going to make it anyways. It'd be stupid to make it. If someone wants something thats easy to make and isn't too sensitive, they should go
for AP.
|
|
|
Microtek
National Hazard
Posts: 872
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
Yes nitrogen iodide is a very poor candidate; first and foremost because of the sensitivity of course, but also because it is not very powerful. I
suppose you all know the demonstration experiment for showing the sensitivity of NI3, where a feather is used to set off the compound ?
Well, they have showed us that experiment a couple of times at my university and each time they have filtered the wet NI3 through ordinary
filter-paper on a plastic funnel mounted in a clamp. Then when the material had dried sufficiently, they touched it with the feather-on-pole thing to
cause detonation. In each case I have noted that the plastic funnel was undamaged by the explosion, which wouldn't have been the case had it
contained HMTD or other common types of explosive.
|
|
|
a_bab
Hazard to Others
Posts: 458
Registered: 15-9-2002
Member Is Offline
Mood: Angry !!!!!111111...2?!
|
|
Maybe that was due to the fact that the NI3 was slightly damp. I found that if damp it's power is very low. It can bearly tear the filter paper.
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
so it would be safe to detonate whith small amounts when it is damp with ammonia right? I might try that...
|
|
|
madscientist
National Hazard
Posts: 962
Registered: 19-5-2002
Location: American Midwest
Member Is Offline
Mood: pyrophoric
|
|
It's not safe when wet. Only less dangerous.
Be wary of iodine gas. Our biology doesn't appreciate its presence in quantities beyond what is found in iodized table salt.
I weep at the sight of flaming acetic anhydride.
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
so how poisinous is the iodine gas?and compared to AP, how strong is it?
|
|
|
mitch77
Harmless
Posts: 3
Registered: 19-2-2003
Member Is Offline
Mood: No Mood
|
|
nitrohalogens
This is my first post, so I’ll get right to it. Very interesting discussions by the way.
First off, this post is of my observations, your mileage may vary. Having made this stuff innumerable times, the best way (i've found) to get a
decent yield outside of a well-equipped lab is:
1. Get a beaker full of regular (clear and not perfumed) ammonia water from the store, and some iodine crystals. Not the tincture of iodine. This
might be the hardest part to obtain, at least in the US, because it’s a watched precursor for some illegal drug synths... though they watch HI
traffic much more carefully.
3. Take a quarter teaspoonful of iodine crystals crushed well and drop it into the ammonia water. Now let it set for a bit, say 30 minutes. Be sure to
cover the container with a glass plate or at least saran-wrap. This boosts the yield (greater concentration of ammonia), and improves stability
because the formed nitrogen triiodide is more stable in the aqueous ammonia). Avoid the highly concentrated and not worth the aggravation.
4. Pour out most of the water, but don’t decant all the water until the very end! It’s important to keep the nitrogen triiodide saturated with the
solution. Leave enough ammonia so the crystals are covered in the container at all times.
5. Scatter the sludge at the bottom of the contained about the place. Do not touch dry material! Even if the smallest crystal on the rim of the beaker
that dries out can detonate the whole batch. Use a popsicle stick to scrape the goodie from the bottom of the container.
6. Take your container a place you where you can wash it out. The rinse water contains a lot of triiodide scraps so dispose of the liquid in a clever
way. When the solid you set explodes (upon drying), it will make a lot of iodine gas that should be avoided. Also it is much louder than you think so
be smart. Clean your hands if necessary with thiosulfate solution.
Evidently the formula for the substance is NI3.xNH3 where x is a function of the temperature. I believe the x ranges from 0 at higher temperatures to
8 or so at very low temps. Don’t know if that affects the efficacy of the desired product one way or the other. My opinion, given the behavior of
the tribromide, that the greater the x the more stable the substance. This would corroborate its stability in a solution of NH3 too. I get much more
satisfying noise in the summer months, btw.
Oh and about keeping it stable for any length of time… I remember reading of an experiment done by a guy who impregnated gelatin with the triiodide
in an attempt to use the gel to prop up those jittery molecules. I think he only succeeded in prolonging its life by a few hours.
Back into the darkness. Pax.
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
ok, by scraping it or even touching it with something, it will detonate. I need your help guys. I've searched a little and I didn't really
find anything. I'm not a very good searcher so maybe you guys can help me out a little.
Thanks!
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
I woul suggest very tiny amount (I have made on purpose a 5g batch and detonated it dry by lifting up the filter paper very carefully and let it fall
on the ground!Damn my ears were ringing strong!
I also did a test in the lab at university (we used to make fun things while waiting our experiments to end); playing with liquid N2, make minute
lemon ice, NH3NI3!
Then when I had the wet stuff I putted some on the ground where a friend was walking (there was only 2 mg but the noise it made without leaving a
trace made the guy jump 1 meter high and watching all arround (Too funny)!
Anyway he asked what it was and I had made a second bobytrap one 0,7cm ball was putted 10 cm away from a 0,4cm ball itself at 10 cm from a third 0,2
cm and next to that a flat spot 10 cm... I asked him to snatch the tiny spot with his shoes and he said:"hey it doesn't wor BOOOOOOM
TUUUUUUUUUUUUT" the tiny spot had detonated sympathetically with all the surrounded spots (maybe via sound propagation wave in the ground or via
air blow) all the lab was alarmed, all the students came to see what happened, even the teachers and students from next lab behind the scaleroom...too
funy to see we were the only one to work!
There was no trace of anything left so noone to incriminate for nothing but a big noise!
Never underestimate the power and the sensitivity of this stuff; it should be handled only in less than 1 g at the time (a pea size ball).
I know that a slightly stablest form can be made from the complexating media using iodide salt with solid I2 (in iodide solution I2 dissolves very
well)!
NH4I/I2 + NH4OH
Then with time and by evaporation you get purple cristalls (no black mess)!
Beware of large cristalls!
By the attempt using gelatin, the guy was able to bring a very large batch on a blast site a few miles away; but I wouldn't handle a large batch
of this even if it seems stable!
Things can go bad too fast with this shit!
 :p :p :p
NH3NI3 has been detonated from ultrasounds at distance; so does Hg fulminate!
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
the timeless
Harmless
Posts: 14
Registered: 3-9-2003
Location: Mirrorland
Member Is Offline
Mood: No Mood
|
|
stabilizing NI3
I think I have heard that it could be stabilized with corn starch or syrup. This procedure reduces the friction between the NI3 chrystals and
therefore reduces the danger. For example the detonation in the famous feather test is caused by this match-strike effect not the pressure caused by
the feather.
|
|
|
markx
National Hazard
Posts: 646
Registered: 7-8-2003
Location: Northern kingdom
Member Is Offline
Mood: Very Jolly
|
|
Would not be very advisable to mess around with that stuff- too unpredictable, too sensitive!!
We prepared a small demonstrative batch for sophomores and left it to dry on the lab table and it detonated from the sound of closing the lab door
that was good 5m away.
And it was wet- freshly prepared... make your own conclusions but I'm staying the hell away of that stuff!!!
Exact science is a figment of imagination.......
|
|
|
sylla
Alchimiste Belge Notoire
Posts: 110
Registered: 2-8-2003
Location: Belgium
Member Is Offline
Mood: No Mood
|
|
This could be interresing for those who don't have access to pure iodine. I haven't test it yet but I think it should work... If someone has
the time to test it... =)
I'm not sure that the reaction will go and I'm not sure that iodine could easily be removed from the solution
H2O2 + 2KI + 2HCl -> 2H2O + 2KCl +I2
I'm quite newbie in chemistry but I know that anyone can purchase KI or KIO3.
If I'm wrong please tell me
|
|
|
asterlite
Harmless
Posts: 1
Registered: 26-11-2002
Location: somewhere on planet earth :)
Member Is Offline
Mood: 
|
|
how about concentrating the I from betadine solution?
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
H2O2 + 2KI + 2HCl -> 2H2O + 2KCl +I2
This may work because you'll be producing chlorine which displaces the iodine.
Easier is if you use another acid that doesn't react with H2O2.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Perhaps if a 2:1 molar ratio of NH4OH to ethylene diamine was used. I suspect that a compound like
NI3-NH2-CH2-CH2-NH2-NI3
would form, and might be a little more stable than ordinary "nitrogen triiodide".
At least with the reaction between chlorine and ammonia, it is known to be an equilibrium reaction (although within a certain pH range and given
enough time, the ammonia can be irreversibly oxidized to N2).
I suspect the compound "nitrogen triiodide", NH3*NI3, is actually an adduct.
NCl3 may not be able to act as a lewis acid in the same way because the iodine atoms have much bigger atomic orbitals to accomodate the extra charge.
While ethylene diamine can react with Cl2 to form an explosive, I think that it would not be iodinated in this situation because the equilibrium would
not favor it. NI3 would act as a much better lewis acid, leaving the ethylene diamine as the lewis base.
The fact that real NI3 cannot be obtained from I2 and NH4OH is not surprising. The NH3 is bound as an adduct and rendered unreactive to
further attack by additional iodine. Cl2 cannot oxidize ammonium ions either in acidic solution (although some NCl3 can be formed from NH4Cl in dilute
aqeous solution, presumably because there is some dissociation of the NH4Cl into NH3 in the solution)
Sorry, it is really a very complicated topic, and it seems impossible to fully explain without going off topic.
Actually the NI3 groups ( in NH3*NI3 ) are cross polymerized into a linear chain through the iodine atoms, not surprising since the triiodide ion also
exists (which is why KI greatly increases the solubility of iodine in water).
[Edited on 21-3-2013 by AndersHoveland]
I'm not saying let's go kill all the stupid people...I'm just saying lets remove all the warning labels and let the problem sort itself out.
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
I think it is hard to generalized as to whether double salts of unstable compounds are more stable. I just cited in a fulminate thread a reference
(see http://www.dtic.mil/dtic/tr/fulltext/u2/625397.pdf ) where certain double salts were generally considered by the author as more
sensitive/unstable. To quote: "Double salts of the alkali fulminates with mercuric fulminate are even more sensitive." Now, in the case of dry
NI3.xNH3, increased sensitivity is really hard to imagine for anyone acquainted with the salt.
[Edited on 21-3-2013 by AJKOER]
|
|
|
Motherload
Hazard to Others
Posts: 245
Registered: 12-8-2012
Location: Sewer
Member Is Offline
Mood: Shitty
|
|
What do you plan on achieving by stabilizing NI3 ?
It will never be considered a reliable primary .... Especially when there is a wack to choose from.
It can only be used for pranks etc.
in which case you can just paint it on when wet.
"Chance favours the prepared mind"
"Fuck It !! We'll do it live !!"
|
|
|
franklyn
International Hazard
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Another related thread on NI3
www.sciencemadness.org/talk/viewthread.php?tid=3905
Nitrogen Triiodide
I. C. Tornieporth-Oetting, T. M. Klapötke,
Chemical & Engineering News 1995, 73(46), 4.
___________________________________
The other trihaloamine
www.sciencemadness.org/talk/viewthread.php?tid=2079
NCl3 being fluid is inherently less sensitive to mechanical disturbance
but is chemically reactive making it unexpectedly sensitive.
The same way that nitric esters are rendered safer for use as dynamites
is to absorb them into diatomaceous earth or synthetic zeolites.
www.soapgoods.com/product_info.php?products_id=1003
I would guess that the same principle can apply with NCl3
if admixed after with something that will coat the particle
surface to isolate the NCl3 from chemical reactions.
___________________________________
Elementary precautions taken by early investigators has
been to dilute NCl3 in solvents such as carbon tetrachloride.
Evaporation would restore the pure material. It appears
Methylene Chloride can potentially be an explosive mixture.
CH2Cl2 + 2 NCl3 => 2 HCl + CCl4 + N2 + Cl2
Other solvents may similarly serve as fuel.
___________________________________
The notion of formulation compounding of trihaloamines is
novel in this forum , at least this is the first suggestion of it.
The prospect of a Nitrogen Trichloride Coordination Complex
is unexplored. Perhaps with Copper Chloride or Zinc Chloride.
Thoughts ?
.
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by DeusExMachina  | | I searched on this a little and even if I did findd sometihng, I was still going to ask to get an input from you guys. I would like to know if there
is a way to stabilize nitrogen tri-iodide. I heard that to make it less sensitive when it is wet, it needs more ammonia but I am not very concerned
with that. I would like to know if there is a way to handle nitrogen tri-iodide safely. Well, is there? |
To answer the question if there is a way to handle NI3.NH3 safely, the answer appears to be yes!
Per an old chemical journal (per an extract in Atomistry.com on NI3 at http://nitrogen.atomistry.com/nitrogen_iodide.html ) to quote:
"The reaction between iodine and ammonia appears to proceed in three stages. Firstly, hypoiodous acid and ammonium iodide are produced:
NH4OH + I2 = HOI + NH4I;
and the hypoiodous acid further combines with ammonia to form ammonium hypoiodite:
NH4OH + HOI = NH4IO + H2O.
Finally, the ammonium hypoiodite decomposes into nitrogen iodide:
3NH4IO ⇔ N2H3I3 + NH4OH + 2H2O.
The last reaction is apparently reversible, as the nitrogen iodide redissolves in strong ammonia."
By the last statement, which appears to be supported elsewhere, for example, per Wikipedia (https://en.m.wikipedia.org/wiki/Nitrogen_triiodide ) to quote:
"When kept cold in the dark and damp with ammonia, NI3 · NH3 is stable."
And, per another source (see http://www.acornusers.org/education/Thesis/NI3andAgar.html ):
"When the NI3 is in the presence of ammonia solution, it is very stable for transportation and study. When the ammonical solution is removed, the
amount of energy keeping the adduct together is too small, so the ammonia evaporates off, leaving the highly unstable solid."
with one possible explanation that, in the presence of strong ammonia and water (causing it to dissolve), it is no longer chemically NI3 · NH3 !
However, I do believe the Wiki statement is remiss in not citing concentrated ammonia presence, while the second statement does at least account for
the potential danger in dilute aqueous conditions from the loss ammonia. There is one report suggesting the detonation of a large amount of aqueous
NI3.NH3 (I surmise from the likely loss of ammonia) in wet conditions! Here is an extract from another SM thread supporting this report (at http://www.sciencemadness.org/talk/viewthread.php?tid=16208 which also contains one of the most detailed prep I found by GreenD):
| Quote: Originally posted by spotlightman1234 | You never want to wash NI3 with water or any other solvent!! nitrogen triiodide forms an adduct with ammonia
NI3-NH3-NI3-NH3.... this is why the nitrogen triodide is stable when wet in ammonia, but when it is allowed to dry the ammonia leaves, leaving only
NI3.. I tested this by (from a distance of course) washing wet NI3 with water to get rid of the ammonia. After about 200ml of water were washed
through the filter paper some of the NI3 exploded, spreading NI3 everywhere making a fun residual crackling sound. |
Not sure if I agree with the suggested chemistry by Spotlightman1234 as the dry salt, per the ammonia path, is NI3.NH3, as long ago, it has been
decomposed to largely indicate a compound formula of N2H3I3 (or, at least some hydrogen, see https://books.google.com/books?id=1iQ7AQAAMAAJ&pg=PA539&... ). However, I would suggest that isolated breakage of the NI3.NH3 chain, exposing
unstable NI3, occurring more frequently in low NH3 concentrations, is a possible explanation, along with the alternative suggestion for creation of
the unstable, but not explosive, NH4IO, or my personal choice, a movement of the equilibrium to favoring NHI2.
The absence of light is also important given the general sensitivity iodide salts to light (causing a breaking down into atomic iodine, and some I2
created therefrom).
Rapid removal (as a path to detonation) of the NH3/H2O could be accomplished with, say, dry CaCl2, which also removes NH3 with the formation of
CaCl2.xNH3.
[Edited on 8-8-2019 by AJKOER]
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
