| Pages:
1
..
7
8
9
10
11
..
25 |
nitro-genes
International Hazard
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
Wow, that was more violent than expected!  I suppose the thermite burns a hole
through the ice first that acts as a confiment for the rest of the formed steam. With liquid water instead of ice the results wouldn't be like that I
guess... 
Unlike that cheesy and staged British program Brianiac, german TV used to have some really interesting science shows. Especially the "Knoff Hoff show"
was a great program...
|
|
|
Axt
National Hazard
Posts: 795
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by nitro-genes
With liquid water instead of ice the results wouldn't be like that I guess...
|
"A phenomenon of considerable industrial importance in recent years is the vapor explosion, often referred to as a thermal or steam explosion. This
phenomenon results from the extremely rapid heat transfer from hot liquid (e.g., molten metal) to cold liquid (e.g., water) when the two are contacted
together. Sporadic explosions resulting from this phenomenon have been responsible for loss of life and property in industry for a number of years,
and efforts have been made to understand the extreme violence of these interactions. It is not presently known exactly how these explosions are
initiated. However, resultant effects of these interactions are dramatic, and substantial amounts of energy are released during such explosions."
<a href="http://www.freepatentsonline.com/patents/us/521/5212343/5212343.pdf">US5212343</a>
"A aluminum liner, weighing 2.6 grams, was filed with 11 grams of water and sealed. The liner was placed inside of a well drilled in cold pressed
pyrotechnic mix No. 1 CuO pellets. The pellets had been formed by cold pressing 74 grams of the mix No. 1 CuO. The pellets and liner were placed on a
retaining stand and secured into place with the igniter plate and threaded rods. A Holex.TM. igniter was used to initiate the reaction of the
pyrotechnic pellets. About 0.2 seconds after the initiation, an explosion occurred when the molten products of the pyrotechnic pellets and molten
aluminum from the liner contacted the water." <a href="http://www.freepatentsonline.com/patents/us/437/4372213/4372213.pdf">US4372213</a>
[Edited on 21-11-2006 by Axt]
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
This is highly interesting.
I am particularly impressed about the effect of the molten metal/metaloxide onto the ice after the explosion, producing pyrotechnic effects in its own
right.
This is something that can be definitly tried, particularly for members from Russia and Canada, or Antarctica, given 60 members are from there 
I wonder what'd happen if it was done the other way round: a large thermite charge in a slightly larger beaker in water. Or how about
methanol/ethanol, or, to get more fancy, things such as ammonium chloride, hydrazine chloride, ammonium persulfate etc? I bet a lot of experimenting
could be done there.
[Edited on 21-11-2006 by chemoleo]
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
DeAdFX
Hazard to Others
Posts: 339
Registered: 1-7-2005
Location: Brothel
Member Is Offline
Mood: @%&$ing hardcore baby
|
|
Hell while we are at it lets use a frozen block of hydrogen peroxide. I have a feeling the iron oxide would decompose the frozen peroxide causing the
thermite mix to fly into the air. The oxygen released from the peroxide and iron oxide would then combine with the Aluminum.
[Edited on 21-11-2006 by DeAdFX]
|
|
|
nitro-genes
International Hazard
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
Ahh, now I understand what is happening...
If you drop some water on a hot metal surface it will not flashboil at all since there is an insulating vapour layer layer between metal and water. I
forgot that the metal is also a liquid in this case. With two liquids, the vapour layer is not stable and will dispers the liquid metal troughout the
water, causing instant flashboiling of the entire water mass...
Replacing the water by some liquid fuel is the next logical step indeed.... 
I'll look into it, I've plenty of aluminium powder left, I'm a bit short on the iron oxide though... 
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Here's a bit of historical interest-
Aluminum as a Heating and Reducing Agent, by Dr. Hans Goldschmidt and Claude Vautin
http://pyrobin.com/files/thermit(e)%20journal.pdf
(This is from 1898, before Aluminum became a cheap metal)
|
|
|
farmisist
Harmless
Posts: 4
Registered: 15-8-2005
Location: Penn
Member Is Offline
Mood: No Mood
|
|
The other day I decided to try to use thermite to remove a tree stump. I used probably about 2Kg of thermite (Fe3O2) for this. And against my better
judgment I threw in some Teflon power/Al mix. Fortunately there weren’t any repercussions from any Fluorine gas. The experiment as a whole failed,
the stump remained largely unchanged, and actually, some bits of paper were left over after the reaction. But if you wanna see a video of it, its here
http://video.google.com/videoplay?docid=4864739774767110399&...
(We put a tire rim around the stump and some boards to protect my mom's plants.)
Can\'t have fun without fire
\"Freuer Frei\"
|
|
|
Nixie
Hazard to Others
Posts: 490
Registered: 12-12-2006
Member Is Offline
Mood: ?
|
|
Why not do as farmers do and drill holes, soak it with nitrate solution, and later add some fuel and light it?
|
|
|
farmisist
Harmless
Posts: 4
Registered: 15-8-2005
Location: Penn
Member Is Offline
Mood: No Mood
|
|
Well to be perfectly honest I was just looking for a good excuse to use some thermite. Thats what we'll probably end up doing now that the thermite
didn't work out. Thanks anyway for the suggestion.
Can\'t have fun without fire
\"Freuer Frei\"
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: | Originally posted by farmisist
Well to be perfectly honest I was just looking for a good excuse to use some thermite. |
Thermite is good for puncturing or welding metals, but isn't magicaly capable of doing similar things to wood, concrete or even paper. There were a
number of WWII era government tests done on document destruction mechanisms for safes, thermite was not effective... Bricks of Sodium nitrate and
coarse Magnesium were eventually used, as I recall. And even that wasn't outstandingly effective if there were thick piles of papers. Cellulose is a
good insulator!
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
Alright, I have my ingredients.
5lb Al
3lb Zn
1lb CuO
1lb Cu2O
1lb V2O5
How do I find these stoichiometric ratios? It's been a LONG time since I was in a chemistry class, and my next one isn't until fall semester. Really,
I've forgotten a hell of a lot.
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
Even wikipedia can help you there. The oxides are your oxidizers and the two pure metals are fuels. I don't think Cu2O will get you much since it is a
lower oxidation state. V2O5 is pretty toxic as well, so be careful with it. The aluminum will do a much better job than the zinc for the reactions.
The CuO will go off like flash powder if it is fine enough.....avoid the plume of vaporized copper and alumina and subsequent metal fume fever. Assume
that you are going all the way to metal with the oxidizer...so, CuO -> Cu. For every mole (measurable quantity, just use wikipedia or a periodic
table) of CuO, you need to use up a mole of oxygen atoms. Aluminum forms the oxide Al2O3, so two moles of aluminum will reduce 3 moles of copper (II)
oxide completely. This means that for every mole of CuO, you need to mix in 2/3 of a mol of aluminum. Looking up the numbers, 79.5g of CuO need 18g of
aluminum powder added. ~100g of such a violent thermite is probably an invitation for the cops and/or a hospital visit for the first experiment. Scale
down to a few grams. The V2O5 would be very nice for making Vanadium metal if you keep an element collection.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
Levi
Hazard to Others
Posts: 196
Registered: 24-1-2007
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by egloskerry
How do I find these stoichiometric ratios? It's been a LONG time since I was in a chemistry class, and my next one isn't until fall semester. Really,
I've forgotten a hell of a lot.
|
UnintentionalChaos has posted the correct information but I'm going to speak to you like you're mentally challenged for a moment to make sure you
understand the theory.
Because stoichiometric ratios are concerned with the proper number of atoms reacting and because lab equipment measures mass rather than atoms, it is
inconvenient that all atoms do not weigh the same. Thanks to the periodic table we are able to determine the weight of a set amount of atoms (the
mole). 1 mole = 6.022 x 10<sup>23</sup> units, by the way. Anyhow, 1 mole of copper atoms does not have the same mass as 1 mole of
aluminum atoms or 1 mole of oxygen atoms. The mass of a mole of a given type of atom is found on the periodic table underneath the symbol.
Copper has a molar mass of 63.54 grams per mole.
Oxygen has a molar mass of 16 grams per mole.
Aluminum has a molar mass of 26.98 grams per mole.
To determine the amount you need of each, start with a balanced equation.
3CuO + 2Al --> Al<sub>2</sub>O<sub>3</sub> + 3Cu
Simply, 3 molecules of CuO react with 2 molecules of Al to form one molecule of Al<sub>2</sub>O<sub>3</sub> and 3 molecules of
Cu. Therefore, 3 moles of CuO react with 2 moles of Al to form one mole of Al<sub>2</sub>O<sub>3</sub> and 3 moles of Cu.
Great! Or at least it would be great if you had a scale to measure the number of atoms in a pile of CuO. Fear not, you likely possess a scale that
can measure mass so we can figure out the proper ratios with a little bit of math.
One mole of CuO weighs the same as one mole of Cu + one mole of O. Three moles of CuO, then, weighs 3 * (63.54 + 16) = 238.62 grams.
Two moles of Al weighs 2 * 26.98 = 53.96 grams.
The ratio then is 238.62 grams of CuO for every 53.96 grams of Al.
This is roughly 9:2 by weight.
Chemcrime does not entail death. Chemcrime is death.
|
|
|
Levi
Hazard to Others
Posts: 196
Registered: 24-1-2007
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by DeAdFX
Hell while we are at it lets use a frozen block of hydrogen peroxide. I have a feeling the iron oxide would decompose the frozen peroxide causing the
thermite mix to fly into the air. The oxygen released from the peroxide and iron oxide would then combine with the Aluminum.
[Edited on 21-11-2006 by DeAdFX] |
It might almost be worth the cost of the reagents to see a Ag<sub>2</sub>O and Al thermite dripping molten silver into a beaker of
concentrated peroxide
The silver thermite reaction alone would be almost twice as exothermic as the Fe<sub>2</sub>O<sub>3</sub> variety and I expect
silver would do a much better job of decomposing the peroxide than iron would.
[Edited on 3-4-2007 by Levi]
Chemcrime does not entail death. Chemcrime is death.
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
I imagine silver oxide will be fairly hard to get. Expensive, too. That V2O5 was 13$.
The scale is forthcoming. I'm still pricing them.
|
|
|
DeAdFX
Hazard to Others
Posts: 339
Registered: 1-7-2005
Location: Brothel
Member Is Offline
Mood: @%&$ing hardcore baby
|
|
There are some sellers of AgNO3 and Ag2O on ebay.. Their prices are quite nice in comparison to the other resellers of overly priced transition metal
chemicals.
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
Can't seem to find any.
I am getting my camera this week, so I'll be sure to videotape all these reactions.
|
|
|
mrjeffy321
Hazard to Others
Posts: 149
Registered: 11-6-2005
Member Is Offline
|
|
| Quote: | Originally posted by UnintentionalChaos
I don't think Cu2O will get you much since it is a lower oxidation state. |
Actually, Cu2O does give off a very decent thermite reaction.
Cu2O thermite is not as 'vigorous' as CuO thermite (CuO thermite can be VERY reactive), but it still is very much comparable to Iron Oxide thermites
in terms of the reaction it produces (from my experience).
In doing a Cu2O thermite reaction, I was left with a very nice lump of pure Cu metal in the end.
Performing the same reaction with CuO would leave me with virtually nothing in the reaction vessel since all the products were vaporized / thrown out
during the reaction.
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
I'm guessing I use Mg ribbon to light these different compositions? I got a good deal on 75ft of it for just this purpose. It works well for Fe
thermite but I want to make sure it'll work with this, too.
According to wikipedia, silver oxide decomposes when exposed to light.
Alright, I worked everything out. I scaled them all down to be about 50g total. Everything is rounded to a tenth of a gram.
3CuO + 2Al -> Al2O3 + 3Cu
3Cu2O + 2Al -> Al2O3 + 6Cu
3V2O5 + 10Al -> 5AlO3 + 6V
CuO + Zn -> ZnO + Cu
Cu2O + Zn -> ZnO + 2Cu
V2O5 + 5Zn -> 5ZnO + 2V
3CuO + 2Al -> 39.8 + 9
3Cu2O + 2Al -> 42.9 + 9
3V2O5 + 10Al -> 34.1 + 16.9
CuO + Zn -> 26.5 + 9
Cu2O + Zn -> 35.8 + 6.8
V2O5 + 5Zn -> 18.2 + 32.7
[Edited on 6-4-2007 by egloskerry]
|
|
|
Levi
Hazard to Others
Posts: 196
Registered: 24-1-2007
Member Is Offline
Mood: No Mood
|
|
How easily ignitable the mix is depends heavily on particle size. If the particle size is the same for all mixes then I expect any method capable of
initiating iron thermite will also initiate the more exotic blends but I'm only guessing here. V<sub>2</sub>O<sub>5</sub> is
beyond me but if any of the afore mentioned is doomed to failure I imagine it is the vanadium / zinc mix but this is just a hunch because I couldn't
find any thermodynamic data for V<sub>2</sub>O<sub>5</sub> although one site did say that vanadium metal is usually produced
by reducing the pentoxide with calcium--of course calcium is considerably more reactive than zinc. Particle size and proper ratio will be key.
Chemcrime does not entail death. Chemcrime is death.
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
The Al is somewhere around 600 mesh, the Zn is 300. I'm not sure about the others because I don't have them yet. I believe they were shipped on
monday, so I should have them soon. They're in massachusetts.
[Edited on 6-4-2007 by egloskerry]
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
Commercial Niobium Metal & its alloys
Some months ago, my school did a excursion with some students (including i ) to
another city where stay 2 big firms of minning industry. one of phosphate prodution for fertilizers, and another of niobium prodution.
the second , has the BIGGEST niobium mine and prodution in the world. (english version: http://www.us.cbmm.com.br/ ) and can produce (estimated) very easily bulk quantities of niobium metal for at least 300 years!
first we go to mines (all at soil surface, neither at subsoil), and after to prodution (metallurgical) plants( http://www.us.cbmm.com.br/english/sources/mine/operat/f_oper... see "Standard Grade Ferroniobium Production" ) and to a big lab of researches of
niobium uses and anothers things.
i'm still quite wondered with the live vision of the big eletric arc furnace of Nb/Fe alloy production . my colleague take in this moment some
photos..
below, the photos:
(note the aluminium sparks going out of the molten Ni-Fe : .. one of the most beautiful things )
[Editado em 12-4-2007 por Aqua_Fortis_100%]
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
This photo below is after the molten alloy go out of the furnace and stay on metal suports on a small "rail" for transport to another place of the
plant.
in the conferences room of the firm (CBMM), a metallurgical engineer and a mine engineer are in this , explainning to the students all of the mine and
processes.. the metallurgical eng. explained which the Al powder (unfortunately he not said the mesh grade) are mixed with Nb2O5 and the desired
amount of iron (though he not said if this iron is in the form of Fe or Fe2O3) and initiated and keep by eletric arc, and then the molten alloy is
collected below the furnace. i asked about details, and he says which there are another methods for small scale and researche and others furnaces for
producing anothers alloys.
the CBMM also, sell the niobium oxide for other purposes.
my school planning to do another excursion with others teams of students, after holidays, and i think in will ask my teacher to see if she can get
small amounts of Nb2O5 just for "souvenir" ehehe, because its very probably which not sell small amounts, only big.
if i get this i will try make a different thermit.. i know which this thermite not auto sustain it self, so i can add small amounts of Fe2O3 to see
the progress.. what about this?
[Editado em 12-4-2007 por Aqua_Fortis_100%]
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Mind uploading those pictures to an internet server, mmm?
Tim
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
how, finally ,i think, i turn able to upload this photos..was quite difficult to me editing these photos ,since original size was MUCH larger to put
here without irritating members..
12AX7 , thanks to advise me.
i really like to try this if my teacher will got a sample to my..
anyone has made mad experiments with Nb2O5?
edit: ( i remember that when in the lab i asked (with description) to the firm chemist why i cann't use some Nb2O5 in experiments as catalyst in the
production of SO3 instead of V2O5, then he said anything as the resistance of heat(necessary in the catalysis) which the Nb2O5 offer without
decreasing in performance without decreasing greatly in performance, compared to V2O5. Proceed this information?
i hate myself by not ask to he some sample of Nb2O5 (of course!) and more detailed info about thheir reaction with aluminium , chemistry and their
metallurgy.
[Editado em 12-4-2007 por Aqua_Fortis_100%]
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
| Pages:
1
..
7
8
9
10
11
..
25 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
