| Pages:
1
2
3 |
MEXCHEM2006
Hazard to Self
Posts: 50
Registered: 22-8-2006
Location: MEXICO
Member Is Offline
Mood: No Mood
|
|
Reductive amination of L-PAC
I have 50 ml of L-Phenylacetylcarbinol and i want to make L-Ephedrine from it , im going to try LabTops reductive amination with NaBH4 but using a
0.4mole of methylamine /1 mole of L-PAC ratio , because i read that if you use a normal 3/1 ratio you will end up with racemic ephedrine , maybe
someone with practical experience in these reaction can help me establish the best conditions to take these project to a happy ending.
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
If you add the methylamine slowly in portions before reduction you can use a 1/1 ratio for l-PAC forms a quite stable imine.
PS: May I ask how you produced l-PAC pure enough for a NaBH4 reduction avoiding racemisation in the process?
I acually dont understand all this. The charm of the biosynthesis route to ephedrines is that the RAW extract of the fermentation can be used in an
Al/Hg reduction with decent yields, avoiding all workup which so easily results in racemisation.
[Edited on 11-12-2006 by Organikum]
|
|
|
Hilski
Hazard to Others
Posts: 197
Registered: 13-9-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Organikum
If you add the methylamine slowly in portions before reduction you can use a 1/1 ratio for l-PAC forms a quite stable imine.
PS: May I ask how you produced l-PAC pure enough for a NaBH4 reduction avoiding racemisation in the process?
I acually dont understand all this. The charm of the biosynthesis route to ephedrines is that the RAW extract of the fermentation can be used in an
Al/Hg reduction with decent yields, avoiding all workup which so easily results in racemisation.
[Edited on 11-12-2006 by Organikum] |
If the desired product is norephedrine as opposed to ephedrine, could one treat the raw fermentation extract in the same manner, with the exception
that hydroxylamine is used instead of methylamine?
Or is pure L-PAC required to produce norephedrine?
[Edited on 11-12-2006 by Hilski]
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Yes. Thats also covered in several patents IIRC.
|
|
|
roamingnome
Hazard to Others
Posts: 363
Registered: 9-9-2006
Member Is Offline
Mood: No Mood
|
|
Organikum:
Ive seen you mentioned before that a pressurized al/hg works well for animation. ive used unpressurized version with nitromethane to success with
another substrate.
html by rhodium, which is always inspiring, was reporting 30% yield to ppaHCl with raney nickel in benzene.
im leaning toward al/hg though.... of course useing microwaves to form the imine is intriging, my point is without spoon feeding here or pointless
rehash of al/hg banter...
what do you suggest.
ammonia in alcohol mixed with a bubbleing amalgam, then add l-pac and seal it all it a safe pressure vessel, i.e. not a champage bottle!!!
|
|
|
4
Harmless
Posts: 4
Registered: 23-11-2006
Location: in the clutter
Member Is Offline
Mood: paraniod
|
|
MEXCHEM2006, how did you get l-pac? did you go the " yeast culture+benzaldehyde " way?
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
| Quote: | Originally posted by roamingnome
Organikum:
Ive seen you mentioned before that a pressurized al/hg works well for animation. ive used unpressurized version with nitromethane to success with
another substrate.
html by rhodium, which is always inspiring, was reporting 30% yield to ppaHCl with raney nickel in benzene.
im leaning toward al/hg though.... of course useing microwaves to form the imine is intriging, my point is without spoon feeding here or pointless
rehash of al/hg banter...
what do you suggest.
ammonia in alcohol mixed with a bubbleing amalgam, then add l-pac and seal it all it a safe pressure vessel, i.e. not a champage bottle!!!
|
You are a bit confused arn´t you?
|
|
|
roger2003
Harmless
Posts: 5
Registered: 25-3-2004
Member Is Offline
Mood: No Mood
|
|
Reductive amination of L-Pac:
DE Pat 587,586
DE Pat 548,459
DE Pat 588,880
DE Pat 599,433
US Pat 1,956,950
US Pat 1,951,302
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Reference Information
SYNTHESIS OF 2-AMINO-1-PHENYL-1-PROPANOL AND ITS METHYLATED DERIVATIVES'
FRED W. HOOVER* AND HENRY B. HASS
Journal of organic chemistry yr:1947 vol:12 iss:4 pg:506
Summary
The synthesis of 2-amino-l-phenyl-l-propanol and of Z-methylamino-l-phenyl- 1-propanol has been effected in several ways, all utilizing economical
inter- mediates as initial materials. The mixture of diastereoisomers can be obtained in good yield but the methods for separating the isomers are
not yet entirely satisfactory .
Attachment: SYNTHESIS OF 2-AMINO-1-PHENYL-1-PROPANOL AND ITS METHYLATED DERIVATIVES' .pdf (320kB)
This file has been downloaded 6103 times
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
MEXCHEM2006
Hazard to Self
Posts: 50
Registered: 22-8-2006
Location: MEXICO
Member Is Offline
Mood: No Mood
|
|
A friend of mine that works in the pharmaceutical industry gave it to me (99% pure L-PAC), maybe i can have a little more in a few days , thank you
all for your help , this weekend ill try to make the reductive amination.
|
|
|
turd
National Hazard
Posts: 800
Registered: 5-3-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | | [...] but using a 0.4mole of methylamine /1 mole of L-PAC ratio , because i read that if you use a normal 3/1 ratio you will end up with racemic
ephedrine [...] |
That's curious because according to my knowledge (I'm not an organic chemist though) your amination will give two diastereomers. Therefore you will
obtain a mixture of two different compounds which will not be 50:50, because one of the two will be favoured (for kinetic or thermodynamic reasons).
But I don't see how you will get a very high selectivity given that -OH and -H are not *that* different. And why the selectivity is supposed to be
dependent on the methylamine/ketone-ratio. The reduction goes via the imine and once it is reduced, the orientation cannot change. Where does the
amount of methylamine come into play?
|
|
|
MEXCHEM2006
Hazard to Self
Posts: 50
Registered: 22-8-2006
Location: MEXICO
Member Is Offline
Mood: No Mood
|
|
The information came from the book : Secrets Of Methamphetamine Manufacture
.....One would think that the reductive alkylation of that phenylacetone derivative would yield d,l-ephedrine, and then that reduction of that
d,l-ephedrine would then give d,l-meth. That same racemic meth that results from reductive alkylation of phenylacetone. (Your Uncle prefers the buzz
produced by the racemate over the harsher, more nerve jangling buzz produced by d-meth.) Apparently, this isn't the case. The references for this
process claim that solely l-ephedrine is produced, and then reduction of this l-ephedrine, which is identical to natural ephedrine, yields that potent
but harsh d-meth.
The phenylpropanol-1-one-2 can be reductively alkylated to give l-ephedrine. Any one of several methods can be used, just as in the case of
reductively alkylating phenylacetone to meth. Method number one has to be catalytic hydrogenation using platinum catalyst.
In the example taken from US Patent 1,956,950, the chemists place 300 ml of the distilled phenyl-propanol-1-one-2 in the hydrogenation bomb along with
one gram of platinum catalyst, and 85 grams of 33% methylamine solution. They state that it's advantageous to add some ether to the hydrogenation
solution. How much is some, they don't say. They then hydrogenate the solution in the usual manner, with up to 3 atmospheres of hydrogen pressure, and
magnetic stirring of the contents of the hydrogenation bomb.
When absorption of hydrogen stops in two or three hours, the platinum catalyst is filtered out. Then the ethery hydrogenation mixture is shaken with a
volume or two of 10% HCl solution to pull the ephedrine out of the ether and into the acid water, forming the HCl salt of ephedrine. The ether layer
is separated off with a sep funnel, then the dilute acid is boiled away. The residue is diluted with a little alcohol, and then a lot more ether.
Passing dry HCl through this mixture then gives crystals of pure ephedrine hydrochloride. Their yield was around 110 grams.
My commentary on this hydrogenation? That yield is awfully low. Using phenylacetone as a guide, one should be expecting a yield around 300 grams of
ephedrine. What's up? Check out the amount of methylamine used. There are about two moles of the phenylacetone derivative, but they don't even use one
mole of methylamine. It should be the other way around, an excess of methylamine. Perhaps this is how they only get l-ephedrine from the phenylacetone
derivative. In any case, I'd much rather have 300 grams of racephedrine than 110 grams of 1-ephedrine. My thoughts are that one would be better served
just going to Chapter Eleven, and just plug in this phenylacetone derivative for the regular phenylacetone. That means two or three moles of
methylamine for each mole of phenylacetone, alcohol as solvent, and a bit more platinum catalyst in the mixture.
In the patent, they give another reductive alkylation example. They use amalgamated aluminum as the reducer, just like in Method Three in Chapter
Twelve. They take 120 grams of the undistilled fermentation product containing the 1-phenylpropanol-1-one-2, and drip it over the course of two hours
into a solution of 10 grams of methylamine in 500 ml of ether in the presence of 20 grams of activated aluminum amalgam. Simultaneously, they drip
into the mixture 20 to 30 ml of water. Stirring of the mixture is required.
The vigorous reaction that sets in is moderated by periodic cooling. When the reaction is complete after a few hours, they filter the mixture to
remove the aluminum. Then they shake the ether solution with 10% HCl solution to draw the ephedrine into the water. The ether layer is separated then
the dilute acid boiled off. The residue is thinned with a little alcohol, then dissolved in a lot more ether. Bubbling with dry HCl gives 25 to 45
grams of 1-ephedrine hydrochloride crystals.
My commentary on this procedure is identical to the last one. So little methylamine used! I haven't tried this, but I would be surprised to say the
least if more methylamine didn't greatly increase the yield of product. I would also think that any one of the activated aluminum procedures given in
Chapter Twelve could be used, just by plugging in this phenylacetone derivative for the regular phenylacetone. Also the use of ether is to be avoided
when possible.
|
|
|
turd
National Hazard
Posts: 800
Registered: 5-3-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | | Perhaps this is how they only get l-ephedrine from the phenylacetone derivative. |
(emphasis
added)
Judging style and wording, I think you are better off ignoring anything in this book which is not confirmed by more reliable sources.
|
|
|
roamingnome
Hazard to Others
Posts: 363
Registered: 9-9-2006
Member Is Offline
Mood: No Mood
|
|
i wish that I was more confused then I actually am, it would make things simpler, I could save my pennies for the new Xbox game, and 1080 kickflip
just like Tony Hawk, .
No one wants to know that I unfortunately chose to dispose of 500 mls lab-grade nitromethane during a necessitated move during a summer heat wave.
 Safety first you know. Even is I had gallons of it and specialty fine chemicals
in my stocking, I am searching for reaction schemes that don’t use such. Certain schemes rise to the top
I hope this thread produces such schemes. For example using microwaves to form the imine seems advantageous in that unreacted l-pac can be washed out
and recycled( the paper im referring to posted by solo, didn’t discuss racemization issues though) Then the imine can be processed. Yes NaBH is
certainly one method. I like metallic elemental catalysts like lindlar’s, adam’s, raney nickel and al/hg though. Their boss. Everyone wants a one
pot reaction, but there is more then one stair in a stair case.
Scalability, cleaness in reaction and workup, cost, continuous or batch processes, are the point of confusion in choosing a path. Recycling of
reagents etc etc…. anyone can crack open alrich fisher bottles and cook…. Dolphins are even welding under water oil rigs these days….
I appreciate the US patent numbers, pdf’s, web links, really its neato. But it’s up to the interested parties to masticate, discuss, and otherwise
bring life to the subject.
|
|
|
roamingnome
Hazard to Others
Posts: 363
Registered: 9-9-2006
Member Is Offline
Mood: No Mood
|
|
Analytical Sciences
Vol. 20 (2004) , No. 8 p.1179
http://www.jstage.jst.go.jp/article/analsci/20/8/1179/_pdf
my spiney senses are tingeling....
simple microwaves to form an imine..then the electrochemical reduction, i had a feeling that every wave length must be exploited...
any more relavent info on electrochemical reduction would be nice, this is just a grab and run link....
|
|
|
jon
Hazard to Others
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
I was thinking would a luekardt reaction work probably no huh?
what about zinc and ammonium formate?
[Edited on 14-12-2006 by jon]
|
|
|
roamingnome
Hazard to Others
Posts: 363
Registered: 9-9-2006
Member Is Offline
Mood: No Mood
|
|
Closer....
REDUCTION POTENTIALS OF CONJUGATED ALIPHATIC KETONES, OXIMES,. AND IMINES: CORRELATION WITH STRUCTURE AND BIOACTIVITY.
Journal of the Mexican Chemical Society..
redalyc.uaemex.mx/redalyc/pdf/475/47546403.pdf
i rather like south amercian chemistry papers... brazilian papers always seem on the mark, after all they are making ethanol for their whole country.
Contrast this to amercian journals which seem to focus on greater detection limits for drug testing or the like.
The luekardt reaction:
I havent done it, but its an option, and probably will work fine. Ive heard it can get messy for some reason.
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Reference Information
REDUCTION POTENTIALS OF CONJUGATED ALIPHATIC KETONES, OXIMES,. AND IMINES: CORRELATION WITH STRUCTURE AND BIOACTIVITY
Noah N. Niufar/ffiona L. Haycock/ Jodi L. Wesemann/ Jason A. MacStay/ vicctor L. Heaseley/ Peter Kovacic
Journal of the Mexican chemical society vol. 46, Nu. 004, pp. 307-312, 2002
Abstract
To determine which structural features may favor electron transfer in biological systems, cyclic voltammetric studies were carried out on conjugated
aliphatic ketone, oxime, and imine species at pH levels 2 through 7 in most cases. The nature of the conjugated substituents strongly influenced the
reduction potentials. The dione samples were most easily reduced, followed by the diimine and then the mono-and di-oxime analogs. The reduction
potentials for all compounds were pH-dependent, with the most favorable potentials occurring at the lower pHvalues. The possible roles of protonation
hydrogen bonding , the captodative effect , and other aspects were consdered.
The favorable reduction potentials of the compounds exhibiting bioactivity suggest that in vivo electron transfer and oxidative stress may be involved
in various types of bilological process.
Key words cyclic voltmmetry, diones, diimenes, dioximes, bioactive, electron transfer, oxidative stress.
Attachment: REDUCTION POTENTIALS OF CONJUGATED ALIPHATIC KETONES, OXIMES,. AND IMINES-CORRELATION WITH STRUCTURE AND BIOACTIVITY. .p (205kB)
This file has been downloaded 2482 times
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
MEXCHEM2006
Hazard to Self
Posts: 50
Registered: 22-8-2006
Location: MEXICO
Member Is Offline
Mood: No Mood
|
|
I'd appreciate if somebody could find the following reference for this project:
ON THE ANALYSIS OF PHENYLACETYLCARBINOL, AN INTERMEDIATE PRODUCT IN EPHEDRINE SYNTHESIS
Pharmazie. 1965 Feb;20:92-5
On the by-products of ephedrine synthesis
Pharmazie. 1968;23(8):437-43
Isolation, analysis, and synthesis of ephedrine and its derivatives
http://www.springerlink.com/content/q74q7673687m6138/
High-throughput assay of (R)-phenylacetylcarbinol synthesized by pyruvate decarboxylase
http://www.springerlink.com/content/566kpab90y910fk2/
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
High-throughput assay of (R )-phenylacetylcarbinol synthesized
by pyruvate decarboxylase
Michael Breuer · Martina Pohl · Bernhard Hauer · Bettina Lingen
Anal Bioanal Chem (2002) 374 :1069–1073
Abstract
A novel assay has been developed for the detection of (R)-phenylacetylcarbinol, (R)-PAC, a chiral intermediate
in the industrial synthesis of ephedrine. It is the product of a biotransformation of benzaldehyde catalysed by the enzyme pyruvate decarboxylase. The
assay, using 2,3,5-triphenyltetrazolium chloride, enables highthroughput photometric analysis of the activity of the enzyme
thus avoiding time-consuming chromatographic procedures.
Attachment: High-throughput assay of (R )-phenylacetylcarbinol synthesized by pyruvate decarboxylase.pdf (418kB)
This file has been downloaded 2720 times
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
Hilski
Hazard to Others
Posts: 197
Registered: 13-9-2006
Member Is Offline
Mood: No Mood
|
|
Assume one were to adapt procedure #1 from HERE. The MeNH2 would have to be replaced with an equimolar amount of NH2OH or NH3, and of course the P2P would be replaced with PAC.
This is a pretty straightforward procedure, but when one is dealing with the raw fermentation extract (a liter or more of extraction solvent) what
changes would need to be made to the process?
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Biotransformation of benzaldehyde to L-phenylacetylcarbinol (L-PAC) by and conversion to ephedrine by microwave radiation
Vilas B Shukla,1 Virendra R Madyar,2 Bhushan M Khadilkar2 and
Pushpa R Kulkarni
Journal of Chemical Technology & Biotechnology 77, 137, 2002
Abstract:
In a 5 dm3 stirred tank reactor, bioconversion of 30 g benzaldehyde by cells of Torulaspora delbrueckii yielded 22.9 g of pure L-phenylacetylcarbinol
(L-PAC). Facile functional group transformation of 4.5 g of L-PAC to 2-(methylimino)-1-phenyl-1-propanol by exposure to microwave irradiation for 9
min resulted in 2.48 g of product. Conversion of 4.8 g of 2-(methylimino)-1-phenyl-1-propanol to 3.11 g of ephedrine was achieved by exposure to
microwaves in a reaction time of 10 min. The identity of all the products was confirmed by 1H NMR and FT-IR analysis
Attachment: 20061026122321_Biotransformation.pdf (94kB)
This file has been downloaded 3860 times
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
ISOLATION, ANALYSIS, AND SYNTHESIS OF EPHEDRINE AND ITS DERIVATIVES
A. N. Gazaliev, M. Zh. Zhurinov, S. D. Fazylov, and S. N. Balitskii
Chemistry of Natural Compounds Volume 25, Number 3, pp.261,1989
Abstract
A review is given of methods for the isolation, quantitative determination,
and modification of the ephedrine alkaloids, and advances in this field
of natural compound chemistry are discussed.
Attachment: ISOLATION, ANALYSIS, AND SYNTHESIS OF EPHEDRINE AND ITS DERIVATIVES.pdf (911kB)
This file has been downloaded 5115 times
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
jon
Hazard to Others
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
So I can use sodium pyruvate intstead of acetaldehyde in the fermentation step?
has anyone tried this?
I know acetaldehyde can autolyze the yeast this would be preferable the moiety would be made in situ.
[Edited on 16-12-2006 by jon]
|
|
|
MEXCHEM2006
Hazard to Self
Posts: 50
Registered: 22-8-2006
Location: MEXICO
Member Is Offline
Mood: No Mood
|
|
Thank you Solo
Acetaldehyde only works for Zymomonas mobilis
[Edited on 16-12-2006 by MEXCHEM2006]
|
|
|
| Pages:
1
2
3 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
