Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Some question on Peroxide as an anti-septic
Blind Angel
National Hazard
****




Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline

Mood: Meh!

[*] posted on 18-11-2006 at 18:01
Some question on Peroxide as an anti-septic


We were wondering how to kill all bacteria into a drain pipe (the one around the house) because of Iron Ochre deposit. We first though of using NaOCl solution but due to environnemental regulation we can't use any chlorine-derivative bactericide. So my choice is on H2O2 for the moment.We would first wash the pipe with water then using a low pressure sprayer we would spray H2O2 in them. Here are some question:
1) What is the minimal contact time for most bacteria to die under the effect of peroxide
2) Related to #1, would 6% H2O2 be sufficient or a more concentrated solution would be necessary
3) We are talking here of about 15l of Peroxide solution which would end up in the soil or maybe in a creek, wouldn't that be domageable for the ecosystem (soil vs. creek)

I would be very grateful if you could give me some info on this subject, please feel free to drop in idea if you have any too.

Thx




/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED
View user's profile View All Posts By User This user has MSN Messenger
enhzflep
Hazard to Others
***




Posts: 217
Registered: 9-4-2006
Member Is Offline

Mood: No Mood

[*] posted on 19-11-2006 at 02:59


Just a few thoughts..

1) Do we know which bacteria we're dealing with?

2) Without answer to #1, a bit hard to answer. 3% H2O2 is sold as a disinfectant for humans, so at 6% it'll certainly kill..... something.

3) Hydroponic systems use H2O2 (couple of mls per ltr) as an oxygen provider and as a disinfectant. So long as the peroxide isn't too concentrated, the plants'll only get bigger :D


------------------------
NOTE: I may be completely out of my tree here, but I'd be cautions about tipping 15L of H2O2 into a relatively sealed system. I mean, should it find something it doesn't agree with, and subsequently decompose. At 3% you'll suddenly be faced with 300L of extra gas. 6% -> 600L. 12% ->1200L etc.
------------------------
View user's profile View All Posts By User
Nerro
National Hazard
****




Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline

Mood: Whatever...

[*] posted on 19-11-2006 at 03:42


I suppose flushing the tube with a solution of a couple of grams of CuSO4 is out of the question too?



#261501 +(11351)- [X]

the \"bishop\" came to our church today
he was a fucken impostor
never once moved diagonally

courtesy of bash
View user's profile View All Posts By User
Blind Angel
National Hazard
****




Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline

Mood: Meh!

[*] posted on 19-11-2006 at 04:34


The system isn't seale, it's an absorbing drain, it's a semi porous plastic tube (the one wich is rippled) which absorb and then reject at the end the water. We are talking here of about 60 meter (~200ft) of 10cm (4inch) tubing. It might be possible to flush the tubing but it'll be easier to just spray in since the flow rate isn't very constant and it'll be hard to calculate how much water would be required to fill the pipe for a said amount of time. The tube is underground and we don't really want to excavate it.

The bacteria that we are talking about are long filament Iron deposing bacteria from what I can read, they are mainly from the genus Gallionella, Leptothris, and Sphaerotilus. To a lesser extent they are some rod type too: Pseudomonas and Enterobacter. I don't think that they are very resistant to oxydant, I might need to check that further when I'll have time though.




/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED
View user's profile View All Posts By User This user has MSN Messenger
Nerro
National Hazard
****




Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline

Mood: Whatever...

[*] posted on 19-11-2006 at 05:22


How resistant are most bacteria to just plain ol' soap? I'd expect it to wreak havoc on their cellmembranes.



#261501 +(11351)- [X]

the \"bishop\" came to our church today
he was a fucken impostor
never once moved diagonally

courtesy of bash
View user's profile View All Posts By User
Elawr
Hazard to Others
***




Posts: 174
Registered: 4-6-2006
Location: Alabama
Member Is Offline

Mood: vitriolic

[*] posted on 19-11-2006 at 19:56


You could use a chelator such as EDTA, or even Calgon. Make the Fe unavailable to the bacteria, and starve the little buggers.



1
View user's profile View All Posts By User
Twospoons
International Hazard
*****




Posts: 1326
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline

Mood: A trace of hope...

[*] posted on 19-11-2006 at 20:32


I'd have thought H2O2 would be about the most benign bactericide you could find, with regard to persistance in the environment. The iron from the bacteria will probably make the peroxide decompose anyway - which is good, if the peroxide doesn't kill them then the heat certainly will! ICI make 30% peroxide as a 'shock' treatment for swimming pools, for use with the Bacqacil pool chem range, should you be looking for a stronger source.



Helicopter: "helico" -> spiral, "pter" -> with wings
View user's profile View All Posts By User
Blind Angel
National Hazard
****




Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline

Mood: Meh!

[*] posted on 20-11-2006 at 15:23


And what about contact time, how long are we speaking for a good disinfection? I'm guessing rather short, but if anybody has number it'd be nice.



/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED
View user's profile View All Posts By User This user has MSN Messenger
nitro-genes
International Hazard
*****




Posts: 1048
Registered: 5-4-2005
Member Is Offline


[*] posted on 20-11-2006 at 16:45


Lipids are very susceptable to peroxidation, altering the fluidity and permeability of the cellmembrane almost instantly. Cellmembranes are freely permeable for water (changing osmotic potential of the environment will kill them also), so I see no reason why hydrogen peroxide (small molecule, without charge) shouldn't permeate freely too. Once permeated into the cell it will wreak havoc on all cytosolic enzymes, killing the cell very fast. Hydrogen peroxide is one of the meanest compounds to have in the cell. Ever wondered why enzymes involving oxidase reactions are located in a seperate organel? :P Prokaroytes lack peroxisomes completely, so they are even more vulnerable to peroxides probably...

In general, small chemicals that can permeate the cellmembrane very fast, like formaldehyde, chlorine, hydrogenperoxide or alchohol for example are the quickest desinfectants...

Of course concentrated NaOH or H2SO4 will do the job also... :D

[Edited on 21-11-2006 by nitro-genes]
View user's profile View All Posts By User
chemoleo
Biochemicus Energeticus
*****




Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline

Mood: crystalline

[*] posted on 20-11-2006 at 19:19


Well I'd recommend a combination of a shitload (20-50 l) of 3-6% H2O2, detergent (even dishwasher liquid will do), EDTA, and hot boiling water. The large volume is required to maximise contact time - clearly these bacteria are hardy, so they need a solid prolonged pounding until their cell membranes crack (due to heat and time and detergent), and then the H2O2 as well as the EDTA finish them of quickly.

The hot water will be important, from personal experience. Also, H2O2, as well as detergetns, are more reactive that way.




Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
View user's profile View All Posts By User
gil
Unregistered




Posts: N/A
Registered: N/A
Member Is Offline


[*] posted on 16-12-2006 at 17:55


to Blind Angel
didyou finish your job already? I ask this because I presume I'm too late. If this is not the case, or if you did but you are not 100% happy whith results, then have a look at this;get some sand/protozoa mix from a cold pond/lake/river by diggin' 1 foot to reach the fine sand.Fill up a bucket sieving out big bits.pour this sand/amoebae mix trough your pipe using a funnel.Follow it(or mix to last portion of sand) whith 3 or 4 kg. of sodium bicarbonate if you like and have a beer/treat whith the two dime you spared. prefill the pipe+mix sand x
make it runny helping whith some extra water help prevent blocks. Leave few hour/more before add bicarb,if choosen.I would keep it as a last option. the organisms will suffice.It does for Earth since 2.000.000.000 b.c and
some of those organism are able to carry away incredible quantity of particulates,like a snowball downhill; also they find most filamentous bacteria and all that biofilm stuff very appetising.Try it!?




Blind Angel
National Hazard
****




Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline

Mood: Meh!

[*] posted on 17-12-2006 at 07:13


I'm not sure if this is an elaborate trolling attemp or an idea that I'm just too tired to fully grasp, but anyway there is already 2 to 3 feet of snow here and the soil is frozen so sand digging is not really and option.



/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED
View user's profile View All Posts By User This user has MSN Messenger
vulture
Forum Gatekeeper
*****




Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline

Mood: No Mood

[*] posted on 17-12-2006 at 14:11


Formaldehyde is preferred over H2O2 if solid desinfection is required.



One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
View user's profile View All Posts By User

  Go To Top