Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
 Pages:  1  
Author: Subject: colchicine
crushpack
Harmless
*




Posts: 9
Registered: 28-10-2004
Location: CZ
Member Is Offline

Mood: No Mood

[*] posted on 17-11-2006 at 14:24
colchicine


hi all isn't here anyone who has experience with colchicine extraction (from colchicum autumnale) to share it with the others?
I want the recipe for my friend who wants to use it in gardening but of course I'm interested too:D
Or if you find any good source on this extraction please let me know in this forum I would be most gratefull

thx
View user's profile View All Posts By User
solo
International Hazard
*****




Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline

Mood: ....getting old and drowning in a sea of knowledge

[*] posted on 17-11-2006 at 15:00


................see if you can get this, I can't get access to it maybe somone else can,.....solo

Supercritical carbon dioxide extraction of colchicine and related alkaloids from seeds of Colchicum autumnale L.
Ernesto Ellington, Jaume Bastida, Francesc Viladomat, Carles Codina *
Phytochemistry analysis vol.14, issue.3, pg.164
Department of Natural Products, Plant Biology and Edaphology, Faculty of Pharmacy, University of Barcelona, Barcelona, Spain
email: Carles Codina (ccodina@farmacia.far.ub.es)

*Correspondence to Carles Codina, Department of Natural Products, Plant Biology and Edaphology, Faculty of Pharmacy, University of Barcelona, Avda Diagonal 643, Barcelona 08028, Spain

Keywords
Supercritical carbon dioxide extraction • colchicine • 3-demethylcolchicine • colchicoside • HPLC analysis • Colchicum autumnale

Abstract
A method for the extraction of the alkaloids colchicine, 3-demethylcolchicine and colchicoside from seeds of Colchicum autumnale by supercritical carbon dioxide has been established. Several parameters such as pressure, temperature, percentage of modifier and extraction time have been examined. Two extraction steps with constant carbon dioxide density (0.90 g/mL) and flux (1.5 mL/min) were required to extract the alkaloids in 110 min using 3% methanol as modifier. The quantitative determination of the alkaloids was performed by HPLC; the percentages of recovery were higher than 98% for the three alkaloids. This extraction procedure was compared with a conventional method involving maceration and sonication, and the same levels of alkaloids were obtained in each case. The supercritical carbon dioxide method is, however, very efficient, more rapid and more environmentally friendly than conventional methods. Copyright © 2003 John Wiley & Sons, Ltd.
Received: 30 November 2001; Revised: 5 February 2002; Accepted: 13 February 2002

Digital Object Identifier (DOI)

10.1002/pca.702 About DO




It's better to die on your feet, than live on your knees....Emiliano Zapata.
View user's profile View All Posts By User
Elawr
Hazard to Others
***




Posts: 174
Registered: 4-6-2006
Location: Alabama
Member Is Offline

Mood: vitriolic

[*] posted on 17-11-2006 at 19:01


Colchicine is readily available in pill form as a gout remedy. It is not a controlled substance, although in the US you have to have prescription from a doctor. Extracting your own from the plant would be really cool though.



1
View user's profile View All Posts By User
phangue
Harmless
*




Posts: 18
Registered: 1-10-2006
Member Is Offline

Mood: No Mood

[*] posted on 18-11-2006 at 17:49


Look for a copy of the U. S. DISPENSARY from the late 18-hundreds. There used to be one in our community collage library in this small N. Nevada city until somebody ripped it off. Try a university library. These books contain detailed extractions for many alkaloids, including colchicine.
View user's profile View All Posts By User
Esplosivo
Hazard to Others
***




Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline

Mood: Quantized

[*] posted on 19-11-2006 at 00:40


Colchicine should be available OTC at pharmacies. According to the latest BNF, it is sold as 500mcg tables - net price for 20 tables £3.32. Not that expensive.

Is the extraction possible with other forms of solvents, say the cheap dichloromethane?

phangue, I will try looking out for an old dispensary at med school. Thanks for the info. Will post here if I find anything. I guess there should be something on the use of colchicum on Felter's Materia Medica, but don't think it goes so deep as to give an extraction.

(I missed it so much here I decided to make time to return. It's been a very long time since I posted here but I still used to visit every now and then. Med school is though but I still love organic chemistry so darn much :) )




Theory guides, experiment decides.
View user's profile Visit user's homepage View All Posts By User
crushpack
Harmless
*




Posts: 9
Registered: 28-10-2004
Location: CZ
Member Is Offline

Mood: No Mood

[*] posted on 24-11-2006 at 05:51


Thanks for the supercritical carbon dioxide extraction method though I can't imagine how to perform it with my fairly limited home lab equipment:D

I would be more gratefull for some more conventional methods of extraction, typical for alkaloids, something like dissolving this substance in acid to make a water soluble salt from it, which could be then simply extracted by water.

I want good yields and purity, both warranted, that is the reason why I think that experimentation (for which I have no time anyway) is not promising me any success.
Moreover I would need some analytical (at least qualitative) method for this purpose - though of course if you know about any let me please know about it:)

Maybe I should express my demand more accurately than before: I (resp. my friend of mine) want to gain colchicine from colchicum autumnale (my only source) and <I>I don't care if it will be pure colchicine as a base or its salt</I> (though to be truth the last one possibility seems to me better).
And of course to dispose with some analytical method for this substance would be pretty cool:)

Thank all for you help

[Edited on 24-11-2006 by crushpack]

[Edited on 24-11-2006 by crushpack]
View user's profile View All Posts By User
chemoleo
Biochemicus Energeticus
*****




Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline

Mood: crystalline

[*] posted on 24-11-2006 at 19:31


To attain biological small molecular water- and organic solvent-soluble compounds, I suppose a general purification routine can be used:

Crack cells (plants), with a blender and cellulase (washing powder contains that). Extract soluble compounds by centrifugation.
To remove soluble protein, dissolve up to 4M of ammonium sulphate (final concentration), and centrifuge (possibly filter) it off. The soluble fraction should contain the colchicine, amongst a vast array of other compounds.

Now, since colchicine contains no free amine that can be converted to a salt, nor a free carboxy group, you can use that to remove anything containing ionic compounds. For this, lyophilise (freezedry) the extract which has had its salt removed. Dissolve this in weak HCl, and extract the C. with ether/DCM etc. To this extract, add NaOH (weak) and once again extract soluble compounds with ether/DCM. YOu should be left with an extract containing organic nonionic, compounds, that lack COOH or free NH2 groups, devoid of peptides, carbohydrates and so on. So fairly pure. After this a chromatography step will be necessary to isolate the final product (HPLC.... using i.e. an acetonitrile/water gradient).

It won't be easy, and you'll need decent equipment for a proper purification. But obtaining a reasonably pure extract should be possible with simple methods.

May I ask, why are you after colchicine?




Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
View user's profile View All Posts By User
dr. nick
Hazard to Self
**




Posts: 94
Registered: 20-6-2004
Location: Doh!land
Member Is Offline

Mood: yes

[*] posted on 25-11-2006 at 09:32


i don't know why he's after colchicine, but i am after it for use in plant breeding :)

does there exist something like a approximate value how much plant mass of seeds will contain how much colchicine? Just asking, elseway one could never guess the concentration of the solution one uses ...

thanks!
View user's profile View All Posts By User
S.C. Wack
bibliomaster
*****




Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline

Mood: Enhanced

[*] posted on 25-11-2006 at 11:31


in German:

http://www.sciencemadness.org/talk/viewthread.php?tid=3564
http://www.sciencemadness.org/talk/viewthread.php?tid=6806
View user's profile Visit user's homepage View All Posts By User
dr. nick
Hazard to Self
**




Posts: 94
Registered: 20-6-2004
Location: Doh!land
Member Is Offline

Mood: yes

[*] posted on 26-11-2006 at 01:26


wow, i'm flabbergasted (<-ahem ... can one say so?)
The rapidshare link is already dead, but the other one is awesome!

thanks a lot!
View user's profile View All Posts By User
crushpack
Harmless
*




Posts: 9
Registered: 28-10-2004
Location: CZ
Member Is Offline

Mood: No Mood

[*] posted on 26-11-2006 at 06:52


Quote:
Originally posted by chemoleo
May I ask, why are you after colchicine?


I want to use colchicine for the same purpose as dr. nick - plant breeding. But since I'm not gardener, in fact it's not me who want it but as I already said the friend of mine. He wanted me to find out some extraction recipe and as reward I will have some chemical substance which I long sought for - this is a good job i think:)

But of course being chemist the thing with the extraction is not without interest for me and if I will have some (more or less) pure colchicin in the end the better - just for the pleasure of it if no other use occurs for it later.

Otherwise thanx for your proposal of extraction process maybe it can be of some use to me
View user's profile View All Posts By User
gil
Unregistered




Posts: N/A
Registered: N/A
Member Is Offline


[*] posted on 3-12-2006 at 14:30


I did few experiment with it,using aqueous sol. on seeds and on living specimens. Got at best 4 branch x internode which never expressed on the offspring, due to the recessive nature of the gene itself. Also the growing females whith 4 branches and a peculiar squared stem would split in two normal 2 opposite branch each internode or simply revert to normal.Good luck to you anyway!



gil
Unregistered




Posts: N/A
Registered: N/A
Member Is Offline


[*] posted on 3-12-2006 at 14:59


X chemo. : it is said to stimulate mutants (polyploids:3 or 4 sets of genes instead of normal 2 present in a diploid).
Heavy stress does the same job eventually,nearly total stripping of a mature,fast growing plant for example, or any other extreme manipolation of the enviromental parameter protracted overtime.This way would get a more permanent genetic mutation,as common sense suggest. If you have green thumbs,at 6 or more generation X year
it doesn't take long.That is BREEDING! [EUGenetic's ROCK!]
I have nae time nae space but if ... I would try recombinase carrier,maybe in cell culture first, then develop,select and cross, but this WEE human breeding ties mae hands!




crushpack
Harmless
*




Posts: 9
Registered: 28-10-2004
Location: CZ
Member Is Offline

Mood: No Mood

[*] posted on 17-2-2007 at 06:23


Now when I've got some extraction methods it would be great to know somethink about its application. On my mind is especially its use in inducing polyploidy in plants. Gil u said u have some experience with that I would be really gratefull if u can tell me more about it. U said to use it in aequous solution and on seeds but could u give more details (f.e. how to make those solutions, how long to treat the seeds and so on)?
thx for your reply
View user's profile View All Posts By User
Sauron
International Hazard
*****




Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline

Mood: metastable

[*] posted on 17-2-2007 at 08:56


As this stuff is not a scheduled subatnce it ought to be commercially available and a lot cheaper than buying pharm grade in retail pill form.

Have a peak at Aldrich, Fluka, Merck, Acros, etc.

As for extraction, there is a book on alkaloids in the forum library (two volumes) available for free download. Doubtless it has a chapter on colchicine. That will cover extraction, solublity, physical constants of the base and its salts etc etc. I am sure you will need the dried and powdered (in a herb mill) plant and a lot of it is you expect to get a qty of the alkaloid. This is not a trivial process.
View user's profile View All Posts By User
Sauron
International Hazard
*****




Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline

Mood: metastable

[*] posted on 17-2-2007 at 09:12


Here's the structure. This stuff is a noteworthy classical poison.

The structure strikes me as interesting. But as these fellows are only interested in plant breeding they will surely not be interested in hitting this with permanganate to cleave those bonds in that six membered ring to give 3,4,5-trimethoxybenzaldehyde along with the 2,3,4 isomer, and some seven membered trash to put out. No, I'm sure the thought never crossed their minds. Good botanists that they are.



[Edited on 17-2-2007 by Sauron]

Colchicine_structure.jpg - 13kB
View user's profile View All Posts By User
Blind Angel
National Hazard
****




Posts: 845
Registered: 24-11-2002
Location: Québec
Member Is Offline

Mood: Meh!

[*] posted on 17-2-2007 at 10:10


Colchicine is a reported mutagen, it create tetraploidy. This is why a lot of gardener tend to be interested in this substance, it create mutant plant which are said to be stronger and bigger, and you can keep this tetraploidy over generation too, this first one being said to be a tad toxic due to colchicine presence.

I would be very interested if you could develop the idea of hitting that with MnO4-. I'm still not a very good chemist and I don't see which bond would be attacked and why, if anyone would care to explain to me I'd be very pleased.

[Edit]
Here are some propriety of Colchicine (Source: Merck 13th Edition):
Colchicine
Solubility:
1g dissolve in 22ml of water, 220ml ether and 100ml of benzene. Freely soluble in alcohol or chloroform. Praticaly insoluble in petroleum ether.
Melting Point: 142-150°C
It says here that it form a crystal compound with chloroform, the twon can be separated by heating for a long time at 60-70°C

And news refs to check:
Chemnitius, J. Prakt. Chem [II] 118, 29 (1928)
F. E. Hamerslag, Technology and Chemistry of Alkaloids (New York, 1950) pp. 66-80

[Edited on 17-2-2007 by Blind Angel]




/}/_//|//) /-\\/|//¬/=/_
My PGP Key Fingerprint: D4EA A609 55E4 7ADD 8529 359D D6E2 33F6 4C76 78ED
View user's profile View All Posts By User This user has MSN Messenger
Sauron
International Hazard
*****




Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline

Mood: metastable

[*] posted on 17-2-2007 at 12:00


How do you make phthalic acid? One way is to chew up napthalene with permanganate, most particularly a partially reduced napthalene and you end up with only the two carboxyls hanging these where the second ring used to be.

Colchcine looks to be a setup for that sort of brute force oxidation. True it may be tricky to get the three methoxyl groups to survive in those conditions. That may present a challenge.

Anyway maybe I am wrong and this is strictly botany and not chemistry, though I am not at all sure why toxicity is a concern in early generation plants unless they are to be eaten...or perhaps, smoked.

I don't really care, it was all idle curiosity
View user's profile View All Posts By User
albabatter
Harmless
*




Posts: 4
Registered: 20-2-2007
Location: Auld Reekie
Member Is Offline

Mood: emphatic

[*] posted on 20-2-2007 at 06:39


Quote:
Originally posted by crushpack
Now when I've got some extraction methods it would be great to know somethink about its application. On my mind is especially its use in inducing polyploidy in plants. Gil u said u have some experience with that I would be really gratefull if u can tell me more about it. U said to use it in aequous solution and on seeds but could u give more details (f.e. how to make those solutions, how long to treat the seeds and so on)?
thx for your reply

I would no bother unless outdoor.
The idea is to select 1000's seeds getting few mutants back,killing the rest in the process.Then monitor what genes mutated.Usually the interesting ones are recessive.Take few bulbs,make a cold infusion,sprout your seeds in that .Most will die. Or try to wet the meristem after sprout every day,or do it to cuttings.
The only polyploid commercial cultivar I remember of,are sicilian oranges,the cutting of which are fiercely guarded.I did not check but I suppose Israeli may have cuttin edge study on the field. I prefer other way of breeding.
And as infusion goes, check(are you? or is Catanzaro?) salix (willow?). A bunch of young,growing stems in 1L. water is a very good root initiator (in cuttings).Pseudomona putida is preferred as stimulator. Also, never judge a specimen until sure it reached full potential.
Extreme condition,manual defoliation,trimming,pruning will cause mutation too,as radical increase of U.V. levels will,also.
Chernobyl disaster did not mutate anything(in Liguria)

[Edited on 20-2-2007 by albabatter]
View user's profile View All Posts By User
JohnWW
International Hazard
*****




Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline

Mood: No Mood

[*] posted on 28-2-2007 at 17:25


Colchicine, extracted from autumn crocus, has long been known as a cure for gout, in sub-toxic amounts. It works by dissolving the deposits of crystals of uric acid ( 7,9-dihydro-1H-purine-2,6,8(3H)-trione, or C5H4N4O3, the final oxidation product of purine), in the tissues of extremities, which cause the condition. The 7-membered unsaturated carbon ring with a keto oxygen and conjugated double bonds is a feature that it has in common with derivatives made from atropine (from deadly nightshade) and cocaine (from coca), and this feature could have aromatic properties if separation of charges resulting in the =O becoming -O- is energetically favored.

[Edited on by JohnWW]
View user's profile View All Posts By User
magnus454
Hazard to Self
**




Posts: 57
Registered: 28-2-2007
Location: Clear Lake City, TX
Member Is Offline

Mood: No Mood

[*] posted on 2-3-2007 at 21:20


Probably get away with an ACETONE extraction of frozen and then ground up plant material, then evap. the acetone, and mix with distilled water, anything water soluable should then dissolve out into the water, and you can then soak the seeds in it for the effect your wanting, try the MARIJUANNA GROWERS GUIDE:P



History is repeating itself.
View user's profile Visit user's homepage View All Posts By User
unionised
International Hazard
*****




Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline

Mood: No Mood

[*] posted on 3-3-2007 at 06:39


JohnWW's post has the wrong structure for uric acid and the wrong mechanism for colchicine as a treatment for gout. There's more information here
http://en.wikipedia.org/wiki/Gout

While atropine does contain a 7 membered ring it is staurated, and atropine is the ester of an alcohol OH group attached to that ring rather than a ketone. I think he's getting atropine muddled woth tropinone.
View user's profile View All Posts By User
kclo4
National Hazard
****




Posts: 916
Registered: 11-12-2004
Location:
Member Is Offline

Mood: No Mood

[*] posted on 15-11-2007 at 20:43


Tis doing this!

i ground three crocus "bulbs" added water and a little vinegar and let it sit for a few hours to dissolve. Filtered it, and let the smaller white particles fall out.. i have a clear solution now

I soaked a Lettuce sprout in it for 20-40 minutes, hopefully it will make super lettuce :)
i am also letting some other seeds soak, like morning glory and datura...

the morning glory is going to sit their for 24 hours, maybe only 15 or something idk and so will half the datura seeds, and then i will also put some datura seeds in for about 5 hours
and compare and contrast germination rate, speed of growth, and size, i will also have just the normal seeds growing.
these seem to be the only seeds i can grow lol

i forgot to neutralize it by the way, ..so what effects will a little bit of acetic acid do to seeds? less then 1% I'm sure

but right, anyways my question is can you boil away water from colchicine?
i don't think its concentrated very much at all...
i know it decomposes from light so it makes me think that heat will do the same as well..
View user's profile Visit user's homepage View All Posts By User
JohnWW
International Hazard
*****




Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline

Mood: No Mood

[*] posted on 16-11-2007 at 00:20


Do you suffer from gout, KClO4? You could try taking the stuff to cure it, in sub-lethal amounts. Gout occurs in men who ingest both large amounts of proteins, and acid-reacting foods and beverages especially alcohol. The testosterone in ordinary men causes the excessive retention in their bodies of amino-acids from proteins, especially purine which oxidizes to uric acid.
View user's profile View All Posts By User
kclo4
National Hazard
****




Posts: 916
Registered: 11-12-2004
Location:
Member Is Offline

Mood: No Mood

[*] posted on 16-11-2007 at 15:35


Nope most people my age don't :) doesn't that play a roll?

I dropped a few pill bugs in my solution, they started to die so it seemed, the color of their shell became a different grey, but they are still alive for a while. this was ten to twenty minutes ago, and so far they seem to be getting better.
Perhaps they will do something cool if they live?

And i think, since its apparently fairly potent that my seeds are going to grow into some nice healthy polyploidys if i didn't kill them all.
and when my moss starts to grow i'm gonna add the colchicine to them and leave a control... might be rather interesting :)

[Edited on 16-11-2007 by kclo4]
View user's profile Visit user's homepage View All Posts By User
 Pages:  1  

  Go To Top