| Pages:
1
..
13
14
15
16 |
j_sum1
Administrator
Posts: 6328
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
That last one is particularly weird. Some kind of jacketed reaction vessel. But I can't imagine what the connections are. The orientation of the
ground joints seems strange. Maybe rotate 90° to the left. Powder input on the side and then stoppered. Addition of liquid and temperature
measurement via the ground joints. Excess solvent or liquid product drains through stopcock. But these are just guesses.
First one looks like a gas drying tube. Bubble chlorine etc through H2SO4. Setup allows for system to be drained without disassembly. But I am not
sure what the spherical bulb is for.
Middle one is a kind of jacketed beaker. But the wide ground glass opening is a bit interesting. Maybe just a lid. Maybe designed to work with
another equally strange piece of glassware.
|
|
|
Rainwater
National Hazard
Posts: 925
Registered: 22-12-2021
Member Is Offline
Mood: Loving every second
|
|
Visited an estate sale this morning. Seen this broken item
It looks like a plate still, with 1 ground glass joint at the base and an open top
Bottom plate has a glass mesh, middle and top plates are bubblers.
Not sure if its just a gas scrubber or if they went all out making a bong
  
"You can't do that" - challenge accepted
|
|
|
pneumatician
Hazard to Others
Posts: 412
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
A Hell to clean it!
|
|
|
Texium
Administrator
Posts: 4593
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
I do believe you bought yourself a
very dirty bong!
|
|
|
Raid
Hazard to Everyone
Posts: 203
Registered: 14-11-2022
Location: N/A
Member Is Offline
Mood: School
|
|
100% bong
|
|
|
esquizete_electrolysis
Harmless
Posts: 12
Registered: 9-10-2018
Location: N.C. RT
Member Is Offline
|
|
Very odd piece
Don’t know exactly what this is. I got it in a lot for a Soxhlet extractor. It looks like a mixing cylinder but it has a make joint.
 
|
|
|
Dr.Bob
International Hazard
Posts: 2739
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
That is the bottom of a gas washing tube. The tops get broken easily, and have a fritted tube (and an outlet tube) on a female jointed top. You
would fill the part shown with some liquid or solid to wash the gas in.
|
|
|
Raid
Hazard to Everyone
Posts: 203
Registered: 14-11-2022
Location: N/A
Member Is Offline
Mood: School
|
|
did the gas inlet and outlet come with it?
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Here is a similar gas washing bottle base:
eBay link
*edit*
The male joint kind of threw me a bit too.
[Edited on 2-22-2023 by arkoma]
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
DocX
Hazard to Others
Posts: 179
Registered: 22-10-2015
Member Is Offline
Mood: No Mood
|
|
Don't know what it's intended to be, but I would sure use it as a drying tube.
Quote: Originally posted by Konduktor  | Hi there,
Came across this strange piece when looking for glassware on my local auction site. Could anyone identify this mysterious part?
Cheers! |
|
|
|
Rainwater
National Hazard
Posts: 925
Registered: 22-12-2021
Member Is Offline
Mood: Loving every second
|
|
Is this a Kjeldahl bulb or a Chromotography Reservoir? Or both
"You can't do that" - challenge accepted
|
|
|
Sulaiman
International Hazard
Posts: 3703
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
It is a bump trap, (old design, before rotovaps became commonplace)
Normally fitted above a boiling pot to prevent splashes caused by bumping from reaching the condenser.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Ormarion
Hazard to Self
Posts: 55
Registered: 19-12-2017
Location: France
Member Is Offline
Mood: Alkylating her DNA
|
|
Recently got this extremely weird piece of glassware for wich i have no idea of its use, i believe the coil would be to make the volume of liquid in
it larger or something but i cant find much else
Any idea?
 
|
|
|
B(a)P
International Hazard
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
| Quote: Originally posted by Ormarion | Recently got this extremely weird piece of glassware for wich i have no idea of its use, i believe the coil would be to make the volume of liquid in
it larger or something but i cant find much else
Any idea?
|
Very interesting looking piece of kit! Could it be used for the separation of aqueous and non-aqueous liquids?
|
|
|
Sulaiman
International Hazard
Posts: 3703
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Looks like someone's brilliant idea
that didn't actually work.
OR maybe just a lamp work test/practice piece?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Parakeet
Hazard to Self
Posts: 74
Registered: 22-12-2022
Location: Japan
Member Is Offline
Mood: V (V)
|
|
Found this piece of glassware in a garbage area in my school. Does anyone know what this is?
|
|
|
Rainwater
National Hazard
Posts: 925
Registered: 22-12-2021
Member Is Offline
Mood: Loving every second
|
|
That goes into the top of a kipps apparatus...
"You can't do that" - challenge accepted
|
|
|
Fery
International Hazard
Posts: 1020
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
Also could be used as a fermentation tube.
https://sklep-chemland.pl/en/lejek-fermentacyjny.html
|
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
It's not glassware but I hope that is OK.
What is the extra stuff on this vacuum pump?
on ebay here:
https://www.ebay.co.uk/itm/145441349355?chn=ps&norover=1...
|
|
|
Cathoderay
Hazard to Self
Posts: 55
Registered: 29-1-2023
Location: US-Texas
Member Is Offline
|
|
My guess is that the small gray cylinder near the pump input is a vacuum switch. When the vacuum gets down to a low enough value it switches on the
assembly on the left end.
The assembly on the left end with the fins is probably a diffusion pump, a very small one.
The diffusion pump is air cooled. On top of the diffusion pump is maybe a butterfly valve that is controlled by the lever with the black ball handle.
I think there is some sort of plug or reducer on the diffusion pump inlet.
[Edited on 12/2/2023 by Cathoderay]
|
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Thanks for reply.
I though the piece with the air heat sink might be a diffusion pump but though it was too small!
The electrical boxes say forevac. and highvac so you are correct.
Yob
|
|
|
steadyhand
Harmless
Posts: 8
Registered: 23-11-2018
Member Is Offline
Mood: Puzzled
|
|
Inherited a bunch of glassware!
Can't figure this one out. Cross between a few things I can think of, but doesn't work in those roles.
|
|
|
steadyhand
Harmless
Posts: 8
Registered: 23-11-2018
Member Is Offline
Mood: Puzzled
|
|
Here's another one. Obviously an air lock, but for something needing careful temp control via the jacket. The inlet from the top goes through a frit
and then a tiny glass triangle ensures any drip falls straight. Odd access to the sumps via the barbed connectors. Lastly, the base doesn't have any
precision fitting to go on a reaction chamber. Maybe o-rings? Any clue what chemistry this might be used for?
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Got this lamp, labeled "Phillips M13", 0,5 ohm and I suspect it might be a spektral lamp producing only a certain part of the lights spectrum.
Could not find anything on the net, what is strange, so I ask here:
What kind of lamp for what spectrum and what application is this?
thx
|
|
|
Dr.Bob
International Hazard
Posts: 2739
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have a bunch of these things, they have a 19/22 joint, then 4 inches of wavy the end diameter is about 5/8" or 17 mm OD. The overall length is 5".
Any ideas of what it is useful for? I'd love to know what they are and even better find someone who has a use for them.
 
|
|
|
| Pages:
1
..
13
14
15
16 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
