Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Stubborn benzophenone
Folks,
I've just made some benzophenone using a Friedels-Craft reaction between benzene and benzoyl chloride, as described in Vogel’s classic reference
work. Distilled at 175 °C under reduced pressure, came as a clear, colourless liquid. Left in the flask was an orange compound (biphenyl?) not unlike
what many people have obtained after distilling benzene from pyrolysis of sodium benzoate.
Problem is: albeit this benzophenone smells exactly as it should, with no overtones of any contaminant, it won’t crystallise. It is stubbornly
liquid, and even a few hours at -18 °C won’t solidify it. Any idea why it displays such behaviour? Is benzophenone known to supercool in any way?
Thanks!
|
|
EF2000
Hazard to Others
Posts: 153
Registered: 10-5-2023
Location: The Steppes
Member Is Offline
Mood: Taste testing the Tonka fuel
|
|
An article about benzophenone's glassy state (https://doi.org/10.1557/PROC-455-429) says that "In fact, it is difficult to freeze benzophenone on cooling."
You can try to introduce nucleation points, something like freezing a droplet and adding it to the rest of benzophenone.
[Edited on 31-5-2024 by EF2000]
Wroom wroom
"The practice of pouring yourself alcohol from a rocket fuel tank is to be strongly condemned encouraged"
-R-1 User's Guide
|
|
Sir_Gawain
Hazard to Others
Posts: 457
Registered: 12-10-2022
Location: [REDACTED]
Member Is Offline
Mood: Stable
|
|
Try gently scratching the inside of the beaker with a glass rod. That usually does the trick.
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Yeah, I tried that. Not a beaker but a tiny bottle. No dice :/
|
|
bnull
Hazard to Others
Posts: 474
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
Dissolve some drops of benzophenone in ethanol or ether, spread the solution on a dish to dry and then sprinkle the powder over the rest of the
benzophenone. I wonder if it will crystallize suddenly or do it slowly.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
Rainwater
National Hazard
Posts: 936
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
When scratching the glass doesn't work, using glass frits usually does the trick.
Frits is easily made by heading the end of a glass rod to red heat, then submerging it into water.
"You can't do that" - challenge accepted
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Quote: Originally posted by bnull | Dissolve some drops of benzophenone in ethanol or ether, spread the solution on a dish to dry and then sprinkle the powder over the rest of the
benzophenone. I wonder if it will crystallize suddenly or do it slowly. |
So far, neither. I've just ended up with droplets of liquid benzophenone all around.
Facing these repeated failures, I asked myself if there were traces of contaminants which could explain this stubbornness. I washed my benzophenone
twice with boiling water (the rationale being that any leftover benzoyl chloride would hydrolyse into benzoic acid/hydrochloric acid and be dissolved
in hot water, and any leftover benzene would float above the water layer while liquid benzophenone is denser), but apart of making wet benzophenone
that I had to dry up with a significant amount of sodium sulphate, it is still liquid.
|
|
bnull
Hazard to Others
Posts: 474
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
Did you distill it again?
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
No. I didn't get back to my lab since, and have only a reduced set of tools at home (my water aspirator is over there).
[EDIT] I did it without much hope using the cheap vacuum pump I use for vacuum filtration and which turned out to be sturdier than I thought. I was
able to get the benzophenone boiling on my hob (stovetop) without even turning the smallest burner in full (see picture). There were definitely
impurities since I was left with a nice benzophenone and some sort of carbonised compound in the RBF. Now I've put the distillate back in its bottle
and in the fridge. Will it crystallise? Bets are open. :p
[Edited on 3-6-2024 by Keras]
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Well, I’m not sure what happened.
I stored the redistilled benzophenone in the same vial I used the first time. There were like small bubbles in it, I wonder if it’s a leftover from
the pre-redistilled product (didn't wash the vial in-between, which was silly). The smell is slightly different, more ‘sooty’? Definitely
stronger.
I put the vial in the fridge. Still liquid. Put it in the freezer. Very syrupy, but still liquid. Put it back in the fridge, then I was fed up, I
grabbed it and simply placed it on the table. Nothing happened. Got to get somewhere else for two minutes, and when I came back it was all frozen
solid! :/ And the vial was slightly warm.
Now, what's weird is that I even have crystals on the vial thread. It simply beats me. Now I’ll have to recrystallise it, obviously. I’ll scratch
it to save some tiny crystals before… :p
[Edited on 3-6-2024 by Keras]
|
|
bnull
Hazard to Others
Posts: 474
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
I thought a re-distillation would work. It's good to see that it did.
Quote: | I put the vial in the fridge. Still liquid. Put it in the freezer. Very syrupy, but still liquid. Put it back in the fridge, then I was fed up, I
grabbed it and simply placed it on the table. Nothing happened. Got to get somewhere else for two minutes, and when I came back it was all frozen
solid! :/ And the vial was slightly warm. |
Just like sodium acetate. Congratulations.
If you have more than enough benzophenone, you may want to try the synthesis of benzopinacol: benzophenone plus isopropanol (or ethanol) and
light (http://www.orgsyn.org/demo.aspx?prep=CV2P0071).
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Thanks! Also thanks for suggesting that second distillation. I’m always a bit wary, because of the inherent losses. Yet, with the microscale
apparatus I use, very little product remain stuck to the glassware.
I can try benzopinacol. Couldn't find much information on it, though. Does it have a particular use or scent or w/e?
[EDIT] Speaking of acetate, I have no such problem with calcium acetate that I make as a byproduct of the haloform reaction between calcium
hypochlorite and acetone. It crystallises quite well!
[Edited on 4-6-2024 by Keras]
|
|
bnull
Hazard to Others
Posts: 474
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
You would have to do that second distillation anyway.
No, I just thought benzopinacol would be interesting because it is a photochemical synthesis, and you can suspend the reaction and continue later
without problems. It resumes from where it had stopped. Benzopinacol is used in polymerizations by free radicals. As for the smell, no clue.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
Keras
National Hazard
Posts: 929
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
I also would like to try the making of tetrachloromethane from chloroform and chlorine in a seal quartz RBF left outside in the sun.
|
|