night429
Harmless
Posts: 48
Registered: 12-11-2019
Member Is Offline
Mood:
|
|
Isopropyl salicylate sensitivity
I recently made isopropyl salicylate following a paper that detailed its synthesis. I did it a little bit fast and loose, using pressed-dry salicylic acid and non-distilled isopropyl alcohol I
dried from 91% using sodium hydroxide, followed by decanting the upper layer and neutralizing with 93% sulfuric acid (which I also used as the
catalyst in the esterification).
In using heptane to extract instead of chloroform, since the paper mentioned it was "extremely soluble in hydrocarbons", I only got about 1mL of the
expected 12mL. The only reason I can think of as to why this was so low is because of the small amount of water present.
I did manage to recover 8.6g of salicylic acid after acidification and a recrystallization. Was this low yield due to my fast and loose method of
synthesizing it?
In a free fall of fire and ice with explosions in the sky
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
isopropyl alcohol is pretty sterically hindered, so I would expect it may just be really slow, plus the water will slow it down some. But I suspect
if you could reflux it longer, it would go much closer to completion. isopropanol should not be too hard to find dry, so it might be worth trying.
|
|
night429
Harmless
Posts: 48
Registered: 12-11-2019
Member Is Offline
Mood:
|
|
Quote: Originally posted by Dr.Bob ![](images/xpblue/lastpost.gif) | isopropyl alcohol is pretty sterically hindered, so I would expect it may just be really slow, plus the water will slow it down some. But I suspect
if you could reflux it longer, it would go much closer to completion. isopropanol should not be too hard to find dry, so it might be worth trying.
|
Thanks for the recommendation. I'll have to repeat the synthesis and reflux it for at least double the time to see how much it increases yield.
Honestly, I'm just shocked that the paper reports having a good yield in only 8 hours.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Well, it is a Russian paper.....
Anyway, what did it smell like? We all know that methyl salicylate is wintergreen, butyl salicylate is supposed to smell like blackberry, and I find
that propyl salicylate smells exactly like celery.
[Edited on 8-4-2024 by DraconicAcid]
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
night429
Harmless
Posts: 48
Registered: 12-11-2019
Member Is Offline
Mood:
|
|
Quote: Originally posted by DraconicAcid ![](images/xpblue/lastpost.gif) | Anyway, what did it smell like? We all know that methyl salicylate is wintergreen, butyl salicylate is supposed to smell like blackberry, and I find
that propyl salicylate smells exactly like celery. |
I've found it smells similar to a glossy magazine while dilute, turning slightly wintergreen-like when concentrated.
It's always fascinating how a small change in alcohol length makes a large difference in smell with these.
|
|