Kloberth
Harmless
Posts: 38
Registered: 2-6-2023
Member Is Offline
|
|
NaClO from TCCA
I did not find any other thread talking about this, but is it possible to prepare concentrated bleach from TCCA? In theory the TCCA should form
hypochloric acid and isocyanuric acid when dissolved in water.
|
|
|
Pumukli
National Hazard
Posts: 708
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
As far as I know the solubility of TCCA in water is not too spectacular to say the least. (A few percent comes to mind, but it is only my gut
feeling.) On the other hand, even if you dissolve it in water you won't automatically get HOCl solution at the same time. There is a second
(hydrolysis) step involved and that is a relatively slow process around pH 7.
[Edited on 14-9-2023 by Pumukli]
[Edited on 14-9-2023 by Pumukli]
|
|
|
Bedlasky
International Hazard
Posts: 1241
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Make chlorine generator from TCCA and HCl, than bubble Cl2 in to the cold NaOH solution.
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
Couldnt he use pool shock, calcium hypochlorite Ca(ClO2)2
|
|
|
Kloberth
Harmless
Posts: 38
Registered: 2-6-2023
Member Is Offline
|
|
i could but dont have it on hand
just wanted to know if there is a easy way to make it from stuff i already have
[Edited on 14-9-2023 by Kloberth]
|
|
|
Texium
|
Thread Moved
14-9-2023 at 14:44 |
Achilles
Harmless
Posts: 24
Registered: 18-9-2023
Member Is Offline
|
|
if you bubble chlorine through cold sodium hydroxide you have to deal with a solution full of sodium chloride and the solution is heavily
corrosive/reactive even agains skin.
|
|
|
Bedlasky
International Hazard
Posts: 1241
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
NaOCl solutions always contain NaCl, they are always made frome chlorine and NaOH.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I doubt whether that still is true. In the past indeed such solutions were made from NaOH and Cl2, but nowadays I'm not sure about that.
When I was a teenager, I could buy powdered calcium-bleach, consisting of Ca(Cl)(OCl), which was made from Cl2 and Ca(OH)2. It was sold in
supermarkets as bleaching powder. This powder had about 35% "active chlorine". Nowadays it is not sold anymore, but now we have Ca(OCl)2, without the
chloride, with appr. 70% "active chlorine". The stuff we buy now is mainly used for swimming pools, but still also is used for bleaching purposes.
It might be that the same is true for bleach. Swimming pool bleach with 13% active chlorine may be mainly NaOCl in solution, with just a small
fraction of NaOH and NaCl in it. I might be wrong, it may be an interesting experiment to check that. If you buy fresh high concentration bleach, then
you could catalytically decompose all hypochlorite to chloride and oxygen and then determine the chloride concentration.
|
|
|
Chemgineer
Hazard to Others
Posts: 216
Registered: 25-5-2021
Member Is Offline
|
|
Quote: Originally posted by woelen  | I doubt whether that still is true. In the past indeed such solutions were made from NaOH and Cl2, but nowadays I'm not sure about that.
When I was a teenager, I could buy powdered calcium-bleach, consisting of Ca(Cl)(OCl), which was made from Cl2 and Ca(OH)2. It was sold in
supermarkets as bleaching powder. This powder had about 35% "active chlorine". Nowadays it is not sold anymore, but now we have Ca(OCl)2, without the
chloride, with appr. 70% "active chlorine". The stuff we buy now is mainly used for swimming pools, but still also is used for bleaching purposes.
It might be that the same is true for bleach. Swimming pool bleach with 13% active chlorine may be mainly NaOCl in solution, with just a small
fraction of NaOH and NaCl in it. I might be wrong, it may be an interesting experiment to check that. If you buy fresh high concentration bleach, then
you could catalytically decompose all hypochlorite to chloride and oxygen and then determine the chloride concentration. |
I recently bubbled chlorine through a saturated solution of NaOH, after my chlorine generator was done I had a nice yellow solution which I assume was
sodium hypochlorite with NaOH and NaCl.
Now in the past I have used shop bought thin bleach to mix with acetone and produce some chloroform.
I tried the same with my prepared hypochlorite solution, I got the heat from the haloform reaction but I did not manage to get a clear layer of
chloroform to settle out but ended up with a cloudy solution.
My guess is either the NaOH or the NaCl is interfering with it.
I could try running 2x Cl generators through it to reduce NaOH as much as possible if I decide to carry on with this,
I dissolved 181g of NaOH in 500ml of water and allowed to fully cool.
I then set up 250g of Sodium dichloroisocyanurate (pool granules) in a flask.
I placed an equalized dripping funnel over it with 420ml of 20% hcl and connected the top to tubing and a glass tube which was placed in the NaOH
solution.
I'm not sure I will do this again as even working outside, when breaking down the apparatus the chlorine was evil!
[Edited on 27-9-2023 by Chemgineer]
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
Store bought bleach has NaOH in it to stabilize.
An excess of NaOH should not stop the reaction.
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
And yes. Chlorine is evil.
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Are you sure it is not chlorine that is interfering?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
