Pages:
1
2 |
oneup
Harmless
Posts: 47
Registered: 17-12-2005
Member Is Offline
Mood: No Mood
|
|
C-Anfo: Prilled or powdererd?
I'm not sure if I'm allowed to ask this, if not i'm sorry just close the topic.
Can you make C-ANFO without crushing the prills? it would be a lot easier to make larger ammounts of it. my C-AN is in the form of brown prills.
|
|
Coolio
Harmless
Posts: 14
Registered: 19-1-2006
Member Is Offline
Mood: No Mood
|
|
whats the meaning of C ??
catalysator or coal ?
but i think it couldn`t be coal because AN plus 2% somthing what is able to burn is an explosive...so its illegal.
Do you know "ultimate chopper" ?
its some kind of strong blender for kitchen work.....I always use to hackle my AN,coal,naclo3,citric acid ....
and it goes fast....prilles in it, 5 seconds on the ON button and ready
|
|
oneup
Harmless
Posts: 47
Registered: 17-12-2005
Member Is Offline
Mood: No Mood
|
|
The C stands for calcium.
That's the impurity added to the AN for some reason i dunno.
In convential means the an is dissolved in water, the calcium carbonate sinks to the bottom and the clear an solution is boiled down. fuel oil is
mixed with that.
another way is to use prilled AN, BUT pure. yet another way is to crush the CAN prills and add the fuel oil to that. my question is can I use the
impure amonium nitrate (it's arround 75%AN 25% Calcium compounds, mostly carbonate but it's brown so it can't be all carbonate) without crushing the
prills, just adding the fuel oil to the prills.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Me thinks CAN is ammonium nitrate mixed with calcium nitrate, not calcium carbonate. Not sure if it's formulated for purely agricultural reasons or
because it won't work in explosives, but I do have a sneaky feeling it's the second alternative.
Anyway, fertilizer grades aren't really suitable for explosives as they have little to no ability to absorb the fuel. Your best bet will be to powder
it well or activate it by adding a few % of water, letting it soak inn for a couple of hours and then dry it.
|
|
Esplosivo
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline
Mood: Quantized
|
|
Calcium carbonate might be useful in agriculture, to reduce the acidity of certain soils and thus elevating soil pH to support growth of certain
plants which do not cope in an acidic substratum.
[Edited on 22-1-2006 by Esplosivo]
Theory guides, experiment decides.
|
|
DeAdFX
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 339
Registered: 1-7-2005
Location: Brothel
Member Is Offline
Mood: @%&$ing hardcore baby
|
|
Different situation but I always powdered my ammonium nitrate. I experminted with different ammonium nitrate based propellants.
|
|
Taaie-Neuskoek
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 222
Registered: 14-5-2004
Location: Zermany
Member Is Offline
Mood: Botanical!
|
|
It is carbonate, as the crap can be filtered out, I assume that you are talking about 'kalkammonsalpeter', where 'kalk' is the Dutch word for chalk.
Calcium is usefull for plants as it is an importand signalling molecule, and is indeed often used as the carbonate to increase the pH of the soil.
(Though plants need an acidic soil for a number of reasons, but that's offtopic... )
Can't you powder it in a coffeegrinder? Those are not too expensive new (20 E at 'Blokker'), and probably even cheaper somewhere 2nd hand. Or try to
find a 2nd hand blender, they can handle a bit more volume. Crushing prills in a coffeegrinder goes really, really quick, within 5sec. operating they
will be fine enough for your purpose, but it will take an afternoon to get a lot through.
A 2nd hand blender would be an ideal solution I think.
Never argue with idiots, they drag you down their level and beat you with experience.
|
|
Boomer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 190
Registered: 11-11-2005
Member Is Offline
Mood: No Mood
|
|
"...a lot easier to make larger ammounts ..." sound not too good to me. If a minute per pound in a blender is too slow for you, what are you planning
to make? 100+ pounds?
And yes, it is Ca carbonate, and sometimes Mg carbonate. It is given on the sack as CaO or MgO content, with 27% nitrogen, i.e. 3/4 is AN.
The prills will *not* work in ANFO, they are pressed so hard the do not absorb fuel. Even if crushed the mix is close to un-detonable, though IRA
found a way to use it.
But they use 3000 pound with a 20 pound booster! You are better off re-crystallizing the pure AN, if activated well even 100g will work in a plastic
tube!
ANd please don't try a monster blast, it only draws attention!
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
You're right, looks like it's AN with a bit of CaCO3 and MgCO3. I think it should work "as is" if properly activated, take a look at US patent 4093478
(part of the Kinepak-patent by Jerry Ico).
|
|
froot
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 347
Registered: 23-10-2003
Location: South Africa
Member Is Offline
Mood: refluxed
|
|
Just to confirm what has been said, here it's called LAN (limestone ammonium nitrate) and it's a lawn fertiliser. I extract it by dissolving,
filtering and evapouration -> heat drying.
I have made a liter of HNO3 with it before by adding the prills, as they are, into sulfuric acid and distilling. The acid is a golden yellow colour
and fumes profusely.
We salute the improvement of the human genome by honoring those who remove themselves from it.
Of necessity, this honor is generally bestowed posthumously. - www.darwinawards.com
|
|
oneup
Harmless
Posts: 47
Registered: 17-12-2005
Member Is Offline
Mood: No Mood
|
|
TN: Yes I mean 'kalkammonsalpeter'
It's simply not true that it only contains calcium carbonate and magnesium carbonate as impurity, the prills are brown and calcium carbonate,
magnesium carbonate and ammonium nitrate are all white. there must be something else in it too.
And right now I wont draw much attention at all with monster blasts becouse this month the army is doing some kind of training and we hear massive
explosions about 2 times a day, sometimes i can here the windows vibrate.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
It's virtually impossible to make any conclusions based on color, it can be anyting from small amounts of impurities to dyes (I've seen fertilizer
dyed in almost every color of the rainbow). Can you post full specs or the producer/brand?
|
|
oneup
Harmless
Posts: 47
Registered: 17-12-2005
Member Is Offline
Mood: No Mood
|
|
hmm I don't know what the brand is I threw away the bag to put it in air-tight glass jars. But you guys say you can't make ANFO with CAN prills. I've
seen commercial ANFO in prilled form. (or does this only work with 100% pure AN?)
Edit: I usually do about 5 pounds ANFO (a little over 2Kg)
[Edited on 23-1-2006 by oneup]
|
|
quicksilver
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
The preperation of the prill is extremely importantant to the over all effectivness of an ANFO agent. The Hurst patents showed that by the
administration of a small amount of water (0.75-1%) and the "baking" of the prills how they become more absorbant and "phased". The "baking" is the
exposure of the prill to 34 C for approx 3 hours (although there are other techniques) the prill chages density level and becomes more sensitive to
exposure to initiation ("cap sensitivity"). The "Cap Sensitive ANFO" is not a theory; it can be done; but not on an industrial level due to cost
factor. If the AN were to be "baked" in the prescribed manner the cost factor would sky-rocket and the whole idea of using ANFO would be less
attractive to the mining companies that now use it. Calcium nitrate itself can be made into a useful blasting agent just as AN can; there are a host
of patents on just that subject. One of the most interesting things about some prills is that by crushing them they become more sensitive. There was a
time when DuPont went to great lengths to eliminate crushed prills. Now DuPont sells crushed AN as a type of ANFO prep. The pre-mixed ANFO comes in
25and 100kg bags. Not all ANFO products come from the cement mixer-type trucks. The pre-mixed ANFO contains an anti-setteling agent to retain the
fuel. Cost factors are marginalized for mining concerns that don't have a roadway large enough to the blast sites for the trucks to make it. So they
pay extra for the bags. Most of those bages are huge tubes that can fit in many boreholes; thus precluding water getting into the blasting agent. AN
must be vertually anhydrous for it to be of value. Any water before or after mixing ruins the work.
|
|
Coolio
Harmless
Posts: 14
Registered: 19-1-2006
Member Is Offline
Mood: No Mood
|
|
ok guys,
I tested 10 kg KAS ANFO-K (Catalysator) last summer ,...Booster: 200g HAPAN (for normal anfo-k only 50g are reqired..)
And of the 10 kg just around one kg detonated,....and everything was dry.
Its just a waste of time and fertilizer.
Its really neccesary for Anfo explosives that the An ist pure...
|
|
nitro-genes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
One of the more sensitive anfo compositions I have ever made was detonable in 4 cm diameter, strong paper tubes with a 750 mg PETN detonator.
Starting with KAS, I first filtered out al the MgO and the solution was boiled down to the point decomposition became visible.
To that cooled solution was added dishwash detergent and 5,5% Sunfloweroil. (the 5,5% is relative to the amount of AN in the solution) This was then
baked at the lowest temperature the oven could handle with the ovendoor slightly ajar...
Drying time can be reduced quite a bit by crushing the Anfo every few hours before putting it back into the oven. Only 8-10 hours was sufficient.
(which is still quite long) The Anfo becomes slightly yellow when it becomes more anhydrous which is a good marker for when it is ready...2% Iron
oxide was then added and mixed thoroughly through the Anfo..The result is a very fluffy powder, which doesn't separate. The baking of the oil together
with the AN makes the oil turn into a hard fat beacuse of additions to the double bonds that make it an oil.
The oven part may seem a bit dangerous but I never put more than half a kilo in the oven at once, and I made sure that the anfo was a in thin layer.
(explosives need a critical diameter to detonate)
[Edited on 24-1-2006 by nitro-genes]
|
|
oneup
Harmless
Posts: 47
Registered: 17-12-2005
Member Is Offline
Mood: No Mood
|
|
Sunfloweroil in ANFO? i've never heard of that.
but the thing about critical diameter is true, I once tried to make detcord by filling a tube with an inner diameter of 0.5cm with nitroglycerin. Only
a few centimeters detonated.
|
|
Coolio
Harmless
Posts: 14
Registered: 19-1-2006
Member Is Offline
Mood: No Mood
|
|
@ nitro genes
I think the effort of your method is really to big.
I just mix 5kg KAS with 5 Litres HOT water and then I wait for 3 days...the K is set down to the bottom so you can decant the AN Solution....
Then I cook 1,5 litres of this solution for about an half our..., let it become hard , then i hackle it with my ultimate chopper...and then i give it
into the ofen for about 2 hours at 100C°..
ready....
|
|
nitro-genes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1048
Registered: 5-4-2005
Member Is Offline
|
|
It is not realy that big an effort. Every step is the same, I only add the oil with the detergent to the boiled down AN solution and then put it in
the oven. My drying time is much longer but my hightech-automated-thermostat-equiped oven can do this al by itself!
To be honest nobody I know gets fully dried AN bij putting it in the oven for 2 hours, certainly not in quantaties of a kilo. ![:o](./images/smilies/shocked.gif)
Fully dried AN when put in the blender creates this fine mist of very irritating airborne AN. It doesn't stick to anything, not even dry skin and it
has an incredibily low density...
For the ANNM you use it is less a problem, in fact a few %'s of water make ANNM more sensitive! But have you ever tested your ANFO with a small
blastingcap only? My point was that this method creates highly sensitive ANFO ![:)](./images/smilies/smile.gif)
[Edited on 24-1-2006 by nitro-genes]
|
|
quicksilver
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
Below is enclosed the original Hurst KINEPAC patent. The information on preperation of the prill (or AN grinding) is exceedingly valuable. It answers
a lot of questions and opens up new concepts. For instance the use of NM is not nesessary if a subsitute nitroalkane is used with xylene. Xylene
balence and cap sensitivity is explored. As well as the fact that we are talking about a #6 cap here gentelmen! This becomes a very sensitive
composition ![:o](./images/smilies/shocked.gif)
Attachment: AN-patent_hurst_2.rar (9kB) This file has been downloaded 1180 times
|
|
Coolio
Harmless
Posts: 14
Registered: 19-1-2006
Member Is Offline
Mood: No Mood
|
|
hm my AN is nearly completely without water after two hours...but I put about 3/4 kg in our high tech 10 year old ofen. ![:P](./images/smilies/tongue.gif)
the anfo-k detonatet at amounts of 300g with 50g HAPAN booster..---- I think thats sensetive enough because I don`t use anfo-k amounts under two kg
|
|
Boomer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 190
Registered: 11-11-2005
Member Is Offline
Mood: No Mood
|
|
"... nearly completely without water after two hours"
The trick is to have lots of air move over it. It dries better on a radiator with a blower at 50C than at 90C in an oven with door slightly ajar.
To see if it is completely dry you put the HOT powder into a glass jar and into the fridge. ANY moisture will give itself away by condensation on the
inside. Even stuff I thought was dry (pan dried at 140C, close to melting) condensed.
My method is boiling the sln down till 180C, and letting solidify with stirring to get soft lumps instead of a hard cake. This has *approx* 3% water
left, OK for distilling NA. Once solid, but above 100C, I crush the lumps and keep on low heat with stirring. When it is anhydrous it turns from
slightly dirty white to snow white.
But then again, I use only a pound per month, and mostly for synths. Hardly det over 50 grams.
|
|
enhzflep
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 217
Registered: 9-4-2006
Member Is Offline
Mood: No Mood
|
|
Although this thread has been dead for some time now, I was lucky enough to have some jpegs, htmls and a link emailed to me this last week of some
rather spectacular shots and thought a few fellow readers here may appreciate them.
The shots on the beach are the results of the blaster using 9.3kg finely blended CAN soaked for 5 hours in 700 grams desiel, using a booster made from
1kg APAN and a 1g AP detonater. Apparently, the charge was buried 1.5 meters deep and set off electrically 60m away by the rather nervous blaster who
was lying down in a trench dug into the sand. On detonationg he got covered in shit... ![:D](./images/smilies/biggrin.gif)
Whilst not ANFO, the shots in the field are similarly awesome. In this instance, the charge was a total of 20 kilos of Sodium Chlorate mixed with
Nitrobenzene. Fired with a PETN booster of unspecified size and a detonator of unknown specs.
Here is a link to the 13MB video (no sound) of the beach shot
http://rapidshare.de/files/22497917/ANFO_10k_-_Beach1.mpg.ht...
And in the attachment, you'll see a quick couple of stills from each det.
Hope you enjoy. original post to be found at RS.org under "Got 5m crater?"
Oh, one last thing - You think the crater in the field is decent? Wait till you see the video ![;)](./images/smilies/wink.gif)
That's one kiwi I won't be pissing off....
[Edited on 23-6-2006 by enhzflep]
|
|
simply RED
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 209
Registered: 18-8-2005
Location: noitacoL
Member Is Offline
Mood: booM
|
|
What is HAPAN?
APAN I know, but that H?
When logic and proportion have fallen sloppy dead...
|
|
DeAdFX
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 339
Registered: 1-7-2005
Location: Brothel
Member Is Offline
Mood: @%&$ing hardcore baby
|
|
Hydroxyl Ammonium Perchlorate Ammonium Nitrate ?
|
|
Pages:
1
2 |