| Pages:
1
..
73
74
75
76
77
..
81 |
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
I can remember seeing something about an energetic powder made from k nitrate and k carbonate but that is ALL I remember. Anyone got any insight?
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Quote: Originally posted by arkoma  | | I can remember seeing something about an energetic powder made from k nitrate and k carbonate but that is ALL I remember. Anyone got any insight?
|
There is an historical mixture called "yellow powder", allegedly percussion sensitive and possibly even a primary explosive in old descriptions.
It was made from a mixture of potassium nitrate, potassium carbonate and SULFUR in 3:2:1 ratio by weight.
The mixture had to be carefully and slowly heated to the melting point of at least one of the ingredients (sulfur being the most likely) with constant
mixing, kept semi molten for a period, then allowed to harden and afterwards be crushed to a powder.
This mixture/product dearly loved to either catch fire or explode during processing. It was also hygroscopic.
There is at least one 1800's patent in USA for use as a percussion priming compound, I don't believe there was ever any substantial commercial use of
this mixture/product. When I tried to replicate historical accounts of production, I had a few accidental fires and failed to produce a product which
behaved as described more often than not. Then ONE TIME, IT WORKED. And damned if I could figure out what I'd done differently THAT time!
As always, if you are going to try? SMALL quantities and personal protective equipment are a must. I recall reading some descriptions by whoever took
out the patent of pound sized batches going off in processing, how he lived long enough to get his patent is a good question.
There is speculation that the mixture + heating process generates polysulfides of unknown stoichiometry/behaviors. It definitely turned a darker
orange/brown color during the heating & mixing process.
[Edited on 3-19-2023 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Thanks Bert. Believe I will leave this one alone.
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
Laboratory of Liptakov
International Hazard
Posts: 1406
Registered: 2-9-2014
Location: Technion Haifa
Member Is Online
Mood: old jew
|
|
Hello everyone. Worldwide, it is not possible to determine the oxygen balance for sodium hypophosphite, NaH2PO2. Available but imprecise calculations
point to -36.9 per CO2. But it is nonsense, because in molecule is not Carbon. Can any of you calculate it exactly?
Thank you. Dr. Liptakov....
[Edited on 3-4-2023 by Laboratory of Liptakov]
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
|
dettoo456
Hazard to Others
Posts: 249
Registered: 12-9-2021
Member Is Offline
|
|
LL, I’m guessing it’d just be substituting the complete oxidation of C to CO2 to P to H3PO4 (technically could be P2O5 but since H3PO4 is more
stable it’s probably favored in the complete decomp pathway). Same as for assuming the OB% on NH4ClO4 (where I believe the Cl is oxidizing in its
own right and converting to HCl). The general formula for OB% also takes into account metallic and non-metallic elements other than C, like Al and
Fe2O3.
|
|
|
Laboratory of Liptakov
International Hazard
Posts: 1406
Registered: 2-9-2014
Location: Technion Haifa
Member Is Online
Mood: old jew
|
|
Thanks, dettoo456....burning results show for NaH2PO2 x 1H2O on OB - 35. Is it not exact, but for orientation ratios is it useful.
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
|
dettoo456
Hazard to Others
Posts: 249
Registered: 12-9-2021
Member Is Offline
|
|
Does anyone happen to know about the acidic properties related to N-oxides (and also their acidity as it relates to N-oxides in
hydroxy/ketone-containing heterocycles? For example, TKX-50 carries two NH2OH molecules as bases for the N-doxides on it and NTO exhibits mild acidity
related to its amphoteric NHs at the 1 & 2 position(which tautomerize with the ketone to form OH- salts with metals and other bases). If one were
to combine both a ketone and N-oxide into a single molecule though (like 5-hydroxytetrazole-2-oxide or even
3,6-dihydroxy-1,2,4,5-tetrazine-2,5-dioxide), how would it act as an acid? Would the base preferentially react with the N-oxide or the hydroxyl group,
and would it be stabilized or sensitized by a constant ‘switching’ of metathesis neutralization at different positions?
|
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Yellow powder
Yellow Powder is a mixture of Potassium nitrate,Potassium carbonate and Sulfur. It has no apparent use in fireworks and should be made for educational
reasons only.
Tutorial Take 20 parts of Potassium Carbonate and 10 parts of sulfur and melt it until a paste. Then let it solidify and add 30 parts of milled
Potassium nitrate to the comp and mix it by diaper method. Besides the violent and unpredictable nature, the chronic hygroscopicity has the effect of
making this substance unsuitable for firework manufacture.
Commonly found on less reputable internet websites and databases is a proposed method of manufacture involving three component melting. This method
has been shown by experiments to very often detonate during this process. This is a good example of why, given the nature of explosives, one should be
wary of trusting internet advice. Much of it is known to be false, and given the consequences of taking false advice. While the internet is an
invaluable learning tool, Don't take what you read as true unless you have backed it up with a number of other sources, even though this will mean
research will further delay your experimentation.
From Pyroguide
Would this work if you were to use sodium nitrate and sodium carbonate or Na Nitrate/ K Carbonate etc
Must it be KN and KC only?
Yob
|
|
|
Laboratory of Liptakov
International Hazard
Posts: 1406
Registered: 2-9-2014
Location: Technion Haifa
Member Is Online
Mood: old jew
|
|
Mixtures Na / Na or K/Na or Na/ K will works. Only behavior will slightly different. Else melting point, else explo point. Else power of explo. Any
way, using cold crushed Yellow powder has low practical using.
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
|
proculation
Harmless
Posts: 3
Registered: 24-12-2020
Member Is Offline
|
|
(this is my first post  but I have been a several years reader/member (not for
"energetic materials" purpose  ))
I'm looking at different pest control (i.e. woodchucks in my case) smoke cartridges (M)SDS's and most of them have mostly the same formulation as
black powder (nitrate, carbon/charcoal, sulfur) but with a ~1:1 nitrate/sulfur ratio instead of ~15:2 and containing about the same carbon/charcoal
percentage.
Question: what is making black powder explode/deflagrate in a confined space (cartridge) but not those smoke cartridges, even though the nitrate
oxidizer composition is only 1/3 less ?
[Edited on 29-4-2023 by proculation]
|
|
|
Rainwater
National Hazard
Posts: 937
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
Pressure, if you where to contain the smoke bomb in a pressure vessel, it would become a real bomb.
The composition amd processing are likely different
Commercial black powder is finely milled, sometimes for days to better mix the reagents and produce a faster boom.
As for pest control, you need a king snake.
"You can't do that" - challenge accepted
|
|
|
specialactivitieSK
Hazard to Self
Posts: 94
Registered: 21-10-2014
Member Is Offline
Mood: No Mood
|
|
Guanidine perchlorate can be produced by double exchange reaction of guanidine hydrochloride with sodium perchlorate, possibly also ammonium
perchlorate.
If I wanted to produce perchlorate of glycine, pyridine... would it be possible to produce these basic raw materials by reacting with HCl ? In an
aqueous solution, or by introducing dried gas into the liquid.
|
|
|
proculation
Harmless
Posts: 3
Registered: 24-12-2020
Member Is Offline
|
|
| Quote: Originally posted by Rainwater | Pressure, if you where to contain the smoke bomb in a pressure vessel, it would become a real bomb.
The composition amd processing are likely different
Commercial black powder is finely milled, sometimes for days to better mix the reagents and produce a faster boom.
As for pest control, you need a king snake. |
Of course, I understand the pressure in an ammunition cartridge. My question was more about the difference in speed/velocity of the
combustion/reaction between the two.
e.g. ignite a black powder (not necessarily commercial) filled cardboard cartridge like those smoke "bombs" and you would actually have created a
"firework" and the whole thing would be propulsed out burning with the gas produced.
From what I understand, the concept of having about 1/3 less nitrate and more sulfur instead is to produce "incomplete" oxidation of the
carbon/charcoal to create more CO than CO2 and also SO2 (CO and SO2 being the gases wanted to kill the pests). But why only that quite minimal change
in composition can make such a big difference in the burning speed ?
|
|
|
Rainwater
National Hazard
Posts: 937
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
Its not clear what the complete composition is, but increasing the content of sulfer might also increases the SOx products. SO2
is toxic, SO3 would be cruel as it combines with water in the lungs to make H2SO4
I couldnt find and literature reguarding this exact topic
[Edit]
https://www.jes.or.jp/isem/2017/invitedspeakers/documents/Mi...
This paper list normal black powder's products of conbustion.
Its a mix of K2S, K2CO3 and K2SO4.
Given the excess of sulfer, K2S and K2SO4 should be major products
These will acidified water and is an inhalation hazard.
The particulate size is listed as 1uM. This also poses an inhalation hazard.
[Edited on 30-4-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Low molecular weight exhaust/high combustion energy ramjet fuel?
I don't do much work with "exotic" or liquid rocket fuels. Looking at the recent trends in tactical rockets, a number of deployed systems are using
fuel rich SOLID fueled rocket engines which once up to speed change from high thrust fuels to an insufficiently oxidized fuel and add rammed
atmospheric oxygen to their incompletely burned rocket exhaust either in the primary combustion chamber or some arrangement of "afterburning"
expansion bell.
Looking at several tables for LIQUID fuels offering low molecular weight combustion products/high combustion energies while considering potential fuel
for a similar hybrid rocket/ram air breathing combustion system? I see lithium borohydride has 24.89g/100cc solubility in tetrahydrofuran @ 25°C.
Density of such a solution is perhaps a bit low, molecular weight of exhaust gasses looks interestingly low, combustion energy with air is quite
decent.
Anyone got experience with how unstable in storage/toxic/corrosive/generally nasty a solution of Lithium borohydride in terahydrofuran might be? I do
understand that some organic reactions makes use of such solution.
https://en.m.wikipedia.org/wiki/Meteor_(missile)
https://en.m.wikipedia.org/wiki/Air-augmented_rocket#:~:text=Typical%20solid%20rockets%20have%20a,oxygen%20engines%20can't%20
https://www.sciencemadness.org/smwiki/index.php/Lithium_boro...
https://www.sciencemadness.org/smwiki/index.php/Tetrahydrofu...
[Edited on 5-12-2023 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: Originally posted by proculation | | Quote: Originally posted by Rainwater | Pressure, if you where to contain the smoke bomb in a pressure vessel, it would become a real bomb.
The composition amd processing are likely different
Commercial black powder is finely milled, sometimes for days to better mix the reagents and produce a faster boom.
As for pest control, you need a king snake. |
Of course, I understand the pressure in an ammunition cartridge. My question was more about the difference in speed/velocity of the
combustion/reaction between the two.
e.g. ignite a black powder (not necessarily commercial) filled cardboard cartridge like those smoke "bombs" and you would actually have created a
"firework" and the whole thing would be propulsed out burning with the gas produced.
From what I understand, the concept of having about 1/3 less nitrate and more sulfur instead is to produce "incomplete" oxidation of the
carbon/charcoal to create more CO than CO2 and also SO2 (CO and SO2 being the gases wanted to kill the pests). But why only that quite minimal change
in composition can make such a big difference in the burning speed ?
|
Having used dozens of such pest control cartridges (rats! I HATE RATS) I observed the pressed composition was a very rough mixture, one could see
crystals of the oxidizer on the pressed surface of the compressed composition without magnification. In a properly milled propellant powder, you would
need a microscope to see the individual crystals of nitrate.
A similar sized pressed grain of powder in a small end burning rocket engine would burn for a few seconds. The "gopher gasser" cartridges smoldered
for perhaps 30 seconds- A long, slow burn, skewed to produce excess sulfur dioxide and CARBON MONOXIDE. Very little chance for overpressuring a rat
tunnel or otherwise going "kaboom".
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
MineMan
International Hazard
Posts: 1012
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Bert | I don't do much work with "exotic" or liquid rocket fuels. Looking at the recent trends in tactical rockets, a number of deployed systems are using
fuel rich SOLID fueled rocket engines which once up to speed change from high thrust fuels to an insufficiently oxidized fuel and add rammed
atmospheric oxygen to their incompletely burned rocket exhaust either in the primary combustion chamber or some arrangement of "afterburning"
expansion bell.
Looking at several tables for LIQUID fuels offering low molecular weight combustion products/high combustion energies while considering potential fuel
for a similar hybrid rocket/ram air breathing combustion system? I see lithium borohydride has 24.89g/100cc solubility in tetrahydrofuran @ 25°C.
Density of such a solution is perhaps a bit low, molecular weight of exhaust gasses looks interestingly low, combustion energy with air is quite
decent.
Anyone got experience with how unstable in storage/toxic/corrosive/generally nasty a solution of Lithium borohydride in terahydrofuran might be? I do
understand that some organic reactions makes use of such solution.
https://en.m.wikipedia.org/wiki/Meteor_(missile)
https://en.m.wikipedia.org/wiki/Air-augmented_rocket#:~:text=Typical%20solid%20rockets%20have%20a,oxygen%20engines%20can't%20
https://www.sciencemadness.org/smwiki/index.php/Lithium_boro...
https://www.sciencemadness.org/smwiki/index.php/Tetrahydrofu...
[Edited on 5-12-2023 by Bert] |
Damn it. That was one of my ideas, that I was going to develop, a fuel rich solid propellant capable of being a ramjet, it simplifies things greatly
and I am upset they developed it before I could… I had formulations in mind as well. But I am sure the engineers in the 60s had thought of this too,
they thought of everything. It’s painful to see an idea I was saving developed, but it also confirms my thinking is calibrated correctly.
Bert. I think solid fuels hold the candle here… liquid fuels do not have the density, yes, higher energy per unit volume…. But exotic liquid fuels
will be around .6-1 density… I think solid can be up to 1.5 or high density… even 2.0 if done right!!
Lithium borohydride. Nice. Chem force has a video on excotic hydrides. Not sure if he tested LBH, but he did test borohydrides and mixed them with
oxidizers. One showed the most impressive brisance I have ever seen… maybe above 10kms
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: |
I was looking at a lower oxidizer % whistle mix with some azodicarbonamide added... |
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
MineMan
International Hazard
Posts: 1012
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: |
Have you used azidocarbonamide In pyrotechnics, it has an extremely high density and looks promising. Seems like it’s a “super fuel”. Isn’t
density about 1.9? |
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: | | Quote: Originally posted by MineMan |
Have you used azidocarbonamide In pyrotechnics, it has an extremely high density and looks promising. Seems like it’s a “super fuel”. Isn’t
density about 1.9? |
It's a gas generator when heated to fairly low temperatures. It is added in SMALL quantities as a fine powder to composite rocket fuels &
propellants to increase burn speed, as each particle will blow up into a gas bubble/form a pit as it is heated either by conduction or IR below the
burning surface, this effectively increases the burning area & speeds up deflagration of grains while providing some additional gas.
|
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
MineMan
International Hazard
Posts: 1012
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
What about in large quantities?
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Azodicarbonamide has two possible decomposition scenarios depending on temperature. I am ASSUMING that when used in explosives/propellants rather than
to puff up plastic resin or frozen pizza dough (YECH!!!) the decomoisition will be under the high temperature scenario, which decomposes it into
carbon monoxide, nitrogen and amonia. Amonia and carbon monoxide DO burn, it's not going to be as high energy as many rocket fuels but COULD be used?
All the use I've seen is as a small adjunct to modify burn speed in composite rocket fuels. Not sure how the economics work out, I suspect the energy
per mass or volume are't attractive as a primary fuel when HTPB, PBAN and aluminum are available & cheap
Someplace around here is about 100g of it, it also speeds up slow burning star compositions, cheaper things did as well or better though.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
MineMan
International Hazard
Posts: 1012
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: | | thought the main attraction was a density of 1.9, if so it has far more energy per volume than other fuels… even close to Al
|
Could you give your source for density figure? The material I've handled is an extremely fine, low density powder. As it was manufactured/sold as a
blowing agent for foamed plastics, the particle size was chosen for ease of wide dispersion in plastic resin feed stocks. It MAY have a high
theoretical density/crystal density, the commercial product is less apparently dense than food grade corn starch, which it somewhat resembles.
[Edited on 5-16-2023 by Bert]
[Edited on 5-16-2023 by Bert]
|
|
|
EF2000
Hazard to Others
Posts: 153
Registered: 10-5-2023
Location: The Steppes
Member Is Offline
Mood: Taste testing the Tonka fuel
|
|
Dornier 335A's videos
I have found a dump of videos from Dornier 335A's channel on archive.org: here. While it's fortunate that they were saved, video descriptions are gone (as are comments). So when there're no details given in the video
itself or file name, what was exactly tested (components, ratios and so on) remains a mystery.
So I have a question: have anybody here those descriptions saved in some form? Like screenshots, text dumps, memories, whatever.
|
|
|
Rainwater
National Hazard
Posts: 937
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
Nice find
| Code: |
youtube user Dornier335AVideo Item Preview
1
1,3,5-Trichlorohexahydrotriazine-6ssW1fypU7E
00:57
2
30 milligram HE FP (High Explosive Flash Powder)-omjlv9iWGe4
00:25
3
55 gram flash powder explosion - Mg NaNO3 C-CKsfaxj8c2g
01:53
4
Ammonium Chlorate (NH4ClO3)-T59J0GjqfXc
01:26
5
Armstrong's Mixture + Ferrocerium - Extremely Powerful-WWPamyEQclM
02:06
6
Armstrong's Mixture + Ferrocerium Detonations-6vnQadeGVD8
01:24
7
Armstrong's Mixture - KClO3, KClO4, KMnO4 and KBrO3-F4lkPn1QQr4
01:33
8
Armstrong's mixture + ferrocerium - different ratios-7EhLMaVA3lw
02:49
9
Armstrong's mixture vs Mg NaNO3 flash powder-zv7i5A45zio
02:22
10
Burning Oxyliquit (Liquid Oxygen Explosives)-3Pr6dyaH17w
02:07
11
Chlorate Based Whistle Mix (part 1)-ptDgmk4pevs
01:15
12
Coloured Flash Powder - Red, Yellow, Green & Blue!-Dz cPOmviU8
02:27
13
Comparison of Burst Compositions-biOZbtc Wvs
02:18
14
Copper Acetylide-y2RNQczD0f8
01:24
15
Copper sulfate magnesium flash powder (CuSO4 Mg)-k6n3-rZOzPk
01:35
16
Copper(II) 5-Azidotetrazolate-Bdtl4-vABUw
01:01
17
CuO Mg thermite-4I0HQu-38sw
01:14
18
Detonator initiated super flash powder (0,05 gram)-ubyCi 7FRQs
01:57
19
Ditetrazolylhexaazadiene - Nitrogen Rich Super Explosive-qVZT5aR3ih0
01:59
20
Dragon's eggs (crackling microstars) in slow motion-2zceUUs R20
02:05
21
Exploding Ferrocerium Flint (High Speed)-375f2SqU6g0
00:34
22
Extremely Powerful Super Flash Powder - 5 milligrams-3k9QDhjVZDA
00:44
23
Fe2O3 Mg thermite-pqQg4R8XRXY
00:50
24
Ferrocerium Based Super Flash Powder - Detonation Test-d7BST4XpF5s
02:01
25
Filming Flash Powder with an Optical Filter-6EZS-OQ0Flw
01:13
26
Flash Powder Comparison - KClO3 Al vs KClO4 Al-N3PXxxptZzA
02:34
27
Flash powder and flour explosions (High speed)-GdF2xAmsQlg
01:11
28
Flash powder with silver and golden sparks-eN2xKceRjDw
01:32
29
Flash powder with water as oxidizer!-ix-OTDv0i8s
01:55
30
Golden Powder and Crimson Powder-Usb6tjrjY1g
01:00
31
High Density Armstrong's Mixture-ixr JHIW 8
01:05
32
Homemade Det Cord-LYMyPZVweyY
03:32
33
How to build a salute shell-UaCUF0asJvI
03:32 33 How to build a salute shell-UaCUF0asJvI
03:25 34 How to make super fine powdered magnesium and aluminium powder (1 micron)-JeMeRhgKFsk
00:49 35 Magnesium Flash Powder Comparison-b1tBxJXoxwo
01:01 36 Magnesium Teflon Flash powder (Mg PTFE)-WDXs3B51GH8
01:00 37 Magnesium sodium nitrate flash powder - 100 µm vs 1 µm-l-FETdncn3I
00:29 38 Magnesium and snow flash powder!- 19a5Tps2C8
00:20 39 Magnesium based yellow star-UGzFV3WDYAQ
04:10 40 Manganese Heptoxide, Mn2O7 [high speed]-7urXzTegEIc
02:58 41 Metal Picrates - Properties and Mixtures-txWSNvw4i8o
01:57 42 Mg KClO3 Flash Powder-Y5JjpjwaSWo
00:27 43 Mg NaNO3 C Flash Powder - 20 milligrams- WV FUz-kZc
02:08 44 Mg NaNO3 flash powder - different ratios-4DkOY0qMXe0
00:31 45 Minecraft - TNT in real life-1ZxQSxKoruM
02:40 46 Mini missile with HEAT warhead-Y1Jdc5JrTk0
01:44 47 Molten Whistle Mix (part 2)-ZRHCnOhx7kU
02:13 48 More Mg NaNO3 flash powder sensitivity tests-spT2vvOZlvc
00:12 49 My first 0.5 Inch Aerial Shell-vHqjGWsHa3A
01:50 50 NaNO3 Flash Powder, KClO3 Flash Powder, Black Powder and H3 Comparison-esQ4G1a519o
00:27 51 NaNO3 Mg ferrocerium flash powder-o9p3-j1CTnc
02:11 52 Nano Armstrong's Mixture - Properties and Sensitivity-UAmJ6QWHmTg
01:28 53 Nano Armstrong's Mixture-bSQIMXuyC8M
01:56 54 Nano Flash Powder - KClO3 MgAl-mpr1MWE1B8I
01:06 55 Nano Flash Powder - KClO4 Mg-HgsLsKlDwpE
01:00 56 Nano Flash Powder - Mg NaNO3-Zr02r-dqSp4
00:30 57 Nano-thermite (super-thermite) 0,05 g-dShGYuU Wks
00:35 58 New black match test-BWLuIWbmlR4
00:37 59 Nitrogen Triiodide (NI3 NH3)-5LaVRNKqBZw
01:34 60 Normal magnalium thermite vs submicron super thermite-61gImPPFRrk
01:11 61 One year of pyrotechnics-lqFmOz4krao
01:18 62 Potassium Chlorate and Potassium Ferricyanide-Cv0SZZyGgyA
01:17 63 Potassium Nitrate vs Sodium Nitrate - Rocket Candy and Flash Powder-ReDz3wyUYRM
02:47 64 Pure Manganese Heptoxide-gPcfwiJcqSY
03:13 65 Pyromusical-AhQod8Qvjzw
00:52 66 Rare Earth Metal Flash Powders-O3lHX-ayzDQ
03:19 67 Saltpeter sugar smoke bomb vs newspaper smoke bomb-RCTTlrFdSkE
02:21 68 Silver Acetylide vs Armstrong's Mixture REVISITED!-lxqkVwC-bks
02:51 69 Silver acetylide vs Armstrong's mixture + ferrocerium-HNRKuuwsZQQ
03:10 70 Slow motion Water Balloon popping (Canon IXUS 300 HS)-1eGLTPeQSec
00:57 71 Sodium Bismuthate Flash Powder-KvmBYe13SUI
01:00 72 Sodium Persulfate and Magnesium Flash Powder-5HsJE7YrfRg
00:52 73 Sodium nitrate flash powder - Mg NaNO3 vs Mg NaNO3 C-EMP4AOKzK5s
00:32 74 Super Fast Flash Powder (NaNO3 Mg ferrocerium)-NyHsoHoMaLQ
01:11 75 Super Flash Powder - 0.4 g Mg NaNO3 C-3ZS6HvD7dBI
02:07 76 Super Flash Powder - K2S2O8 Mg-G-Pwqvb3yu8
01:16 77 Super Flash Powder - KMnO4 with Mg, Al and MgAl- T8zR-f-9X0
00:48 78 Super Flash Powder - The first high explosive flash powder-GcPedD A0BU
01:13 79 Super Flash Powder Detonation - HE FP-2VsbFHYnXWk
01:19 80 Super Flash Powder Tests - NaNO3 Mg, NaNO3 Mg S, NaNO3 Mg ferrocerium-OvV0e a8KpI
01:22 81 Super Flash Powder Tests - Unconfined-fE2ml9Nb6nk
01:47 82 Super Flash Powder and Armstrong's Mixture Comparison-PyOBFvpbo7c
01:11 83 Tetraamminecopper(II) persulfate (TACPS)-5u7jVVaE-Gg
03:17 84 Tetrazole Madness-WowrwV-0ca8
02:45 85 The HVRCA and my projectile velocity meter-KVQhpTuV46I
01:31 86 The Munroe Effect - Demonstrated with Armstrong's Mixture-SJGq0E6EqYU
01:12 87 The Power of Armstrong's Mixture + Ferrocerium-cLWcjiujJVU
01:09 88 The finest homemade aluminium powder you'll probably ever see-I0-itXJVvZI
01:01 89 Thermite test Fe2O3 Al-5i36DF oyYE
01:39 90 Tiny Fireworks Show 2015-09-25-HAaKiDtoUBk
03:13 91 Two Stage Combustion Light Gas Gun Prototype-JXeUvEVZ3mg
00:49 92 Underwater flash powder explosion-FWOHqeRSVkM
01:01 93 Water Activated Flash Powder - AgNO3 Mg-RcflI gQMYA
01:34 94 Yellow Powder-yJj2shi1kvg
00:52 95 Zinc Flash Powder-qAdAH4G KpM
02:09 96 Zinc Sulfur Rockets-u95g XQh5V0
|
"You can't do that" - challenge accepted
|
|
|
| Pages:
1
..
73
74
75
76
77
..
81 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
