Meltonium
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
Purifying Potassium Permanganate
So recently I ordered about 1.5kg of potassium permanganate off of Amazon. I read the MSDS for the product from the supplier and it says 60-100% KMnO4
with sodium sulfate contamination accounting for the majority of the other percentage. I tried to recrystallize some of it but there was a lot of MnO2
residue from the recrystallizing dish. Is there any way I can separate the Na2SO4 and the KMnO4 without a lot of decomposition?
|
|
Texium
|
Thread Moved 25-9-2016 at 16:27 |
nezza
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Potassium permanganate is much less soluble in water than Sodium sulphate so initially I would try washing it with a few changes of slightly
acidulated water (a drop of two of sulphuric acid to keep the pH down). Then you can try recrystallising it again in slightly acidulated water. KMnO4
is not very soluble in water (a couple of hundred grams per litre in hot water) so assuming you end up with 700g of KMnO4 you should try 2 or 3 l of
water for the recrystallisation. Try doing these on a sample first with scaled down amounts to make sure it will work before committing the lot.
If you're not part of the solution, you're part of the precipitate.
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 514
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
In my experience when an MSDS lists 60-100% of some ingredient they are purposefully being vague. If you look up some MSDS's for paint thinner some of
them say "60-100% Hydrotreated light distillate (petroleum)." But really if you think about it what other thing can be part of paint thinner? So I
think that the product you bought can be used as is, unless there is another reason for you to suspect high contaminations (color etc.) A link to the
actual MSDS would be helpful though.
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
If manganese dioxide precipitate is a problem, then you can just filter the solution using a sinistered glass filter.
|
|
wg48
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
Washing with even very dilute acid is very likely to make more manganese dioxide as it would produce permanganic acid which decomposes to manganese
dioxide.
|
|
Maroboduus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
I think acetone might be your answer. Try dissolving some in a minimum of acetone filtering and evaporating.
Low solubility would require an awful lot though.
Got a Soxhlet? perhaps you could leach it out with a Soxhlet, under partial vacuum if needed.
Sodium sulphate might only be common in those permanganate products described as "free flowing' . Perhaps you can find one without this anti-caking
agent in it.
Or you could even try buying an actual reagent instead of a can of green sand filter regenerator, or whatever you bought.
Depending on just what you want it for, you might not need to eliminate the sodium sulphate.
[Edited on 26-9-2016 by Maroboduus]
|
|
Maroboduus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
Amazon also sells Black Swan permanganate, which according to the company is 97% Potassium permanganate. A 3lb bottle is around $45 US.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Depending on intended usage, just use it as-is.
What is the intended purpose that requires it to be free of sodium suphate ?
Alternatively, buy purer material off ebay :-
http://www.ebay.co.uk/itm/100-g-Potassium-permanganate-Kaliu...
It's not expensive enough to mess about with, although messing about with things is what it's all really about.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
@Meltonium - I know this is an old thread of yours, but did you ever find a decent way to purify the KMnO₄? I just purchased 2 pounds of technical
grade, looking for a good way to purify it as well.
Quote: Originally posted by Maroboduus ![](images/xpblue/lastpost.gif) | I think acetone might be your answer. Try dissolving some in a minimum of acetone filtering and evaporating.
Low solubility would require an awful lot though.
Got a Soxhlet? perhaps you could leach it out with a Soxhlet, under partial vacuum if needed.[Edited on 26-9-2016 by Maroboduus]
|
Using acetone and a soxhlet extractor seems like an interesting idea. You thinking just let the soxhlet run and eventually some purified KMnO₄ will
precipitate out of the acetone in the bottom flask as it gets overly saturated? I may give this a shot ![;)](./images/smilies/wink.gif)
Thanks!
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I could be worrying for nothing but heating acetone with potassium permanganate sounds like a potential fire bomb
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Sulaiman ![](images/xpblue/lastpost.gif) |
I could be worrying for nothing but heating acetone with potassium permanganate sounds like a potential fire bomb |
I second that.
Also, the OP has probably sorted it out in the intervening few years.
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Quote: Originally posted by Sulaiman ![](images/xpblue/lastpost.gif) |
I could be worrying for nothing but heating acetone with potassium permanganate sounds like a potential fire bomb |
I've distilled acetone from potassium permanganate before and it's fine.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
So have I. It's a good way to strip (some) impurities out of the acetone.
But the relevant question is "Have you distilled acetone from permanganate that contains unspecified impurities?".
|
|
BingTinsley
Harmless
Posts: 2
Registered: 24-11-2022
Member Is Offline
Mood: Always learning
|
|
What is the answer to the OP's question?
Surely someone on the forum has figured out how to separate potassium permanganate from a powdered mixture that contains sodium sulfate.
Potassium permanganate is incompatible with alcohols and inorganic solvents, so exploitation of Na2SO4's insolubility in organics seems unlikely.
So the obvious plan B is recrystallisation, right? Heat solution of the two compounds, cool it slowly, and (due to lower solubility of pot. perm. in
water) there should be nice majestic purple crystals in a few hours or the next morning...
BUT it seems to me that potassium permanganate is eagerly ready to destroy itself and degrades to manganese dioxide at any opportunity!
Does anyone have a proven method to separate KMnO4 from Na2SO4 ?
[Edited on 5-3-2023 by BingTinsley]
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Matter of fact, I was attempting last week-end to separate KMnO₄ from KCl {I obtained potassium permanganate using oxidation of manganese dioxide
with potassium hydroxide the usual way, but without extra potassium nitrate, then after dissolving the manganate in water, I used HCl to neutralise
the hydroxide and cause the manganate to disproportionate}. I couldn't recrystallise it properly. Now I just think the yield was super poor (it was
more a proof of concept than anything else), because KMnO₄ is much more soluble than KCl at high temp and much lower at low temp, so this makes it
the perfect candidate for recrystallisation from hot water, really.
|
|
Jome
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 154
Registered: 10-6-2004
Location: Soutwest sweden
Member Is Offline
Mood: desiccated
|
|
Potassium permanganate slowly decomposes in solutions even at room temperature, so any process involving heating a solution beyond that will destroy a
lot of the product. I did the MnO2-KOH air oxidation, IIRC the yield was 11-13% (by sodium oxalate titration)
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Thanks for the figure.
Apparently it is possible to operate up to 65 °C. Probably the lack of any solubility data above this point is due to rapid decomposition, but 65 °C
is quoted in several sources so it might be possible to raise the solution at this temperature without suffering to much loss.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 875
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
+1 use it as it is
Purifying of permanganates/manganates is a challenging task which requires special techniques.
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
I managed to get a batch of pretty pure potassium permanganate crystals from MnO₂ using KClO₃ as oxidant during the fusion with KOH, and then by
bubbling CO₂, from a simple generator made with sodium bicarbonate on which I dripped hydrochloric acid, until the solution of potassium manganate
turned purple.
This procedure is different from that of (the late) Chemplayer who couldn't achieve a clean separation using KNO₃ and sodium bicarbonate.
I could probably from then have optimised the crystallisation process, but that first run was just a demo. KCl and KCO₃ are much more soluble than
KMnO₄, so recrystallisation is easy. Apparently, evaporating down the permanganate solution until the first crystals appear is a viable option. Some
permanganate reverts to manganese dioxide, but it doesn’t really impact the yield.
|
|
Texium
|
Thread Split 14-5-2023 at 18:44 |
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2731
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
https://pubs.acs.org/doi/pdf/10.1021/ed064p1058
There seems to be little awareness that sunlight catalyzes the decomposition of permanganate solutions. As do cobalt and nickel:
https://www.sciencedirect.com/science/article/abs/pii/002219...
As such it is important to consider whether you can effectively avoid sunlight, Ni and Co when attempting this purification. The decomposition is also
catalysed by MnO2 itself.
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Purification of Laboratory Chemicals explicitly states that evaporation should be done in the dark. Matter of fact, I let my permanganate
solution dry for 3 weeks or more on a sunlit shelf (behind windows, of course), and I’m not sure much decomposed into manganese dioxide.
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
(Partial) Result of last batch.
|
|