VialsOnRye
Harmless
Posts: 1
Registered: 26-2-2023
Member Is Offline
|
|
Mel-Temp Replacement Bulb
Hi folks! I've recently acquired a nonfunctional Barnstead Mel-Temp melting point apparatus; purportedly the only issue is a burnt out bulb. Having
disassembled the unit, the bulb is an unusual one, with a non-threaded base. The unit is discontinued, and the bulbs seem to be as well, although I
cannot find much information regarding this unit's maintenance (Model 1101D). If anyone has a corresponding manual, or information about a bulb that
would fit this purpose, I would love the help! I'm including photos of the bulb, its housing, and the information placard on the bottom of the unit.
The measured dimensions of the bulb itself are:
Base diameter 1.5cm
Widest glass bulb diameter 1.85cm
Entire height 4.45cm
    
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Ok, easy bake oven.... that is a "can dc bar" style socket, originally used back in the eddision vs. tesla patient wars. But does not mean it's a dc
bulb. As long as you use rms voltages, doesnt make a difference.
Found a unit on ebay, says it is 200 watts. Thats total for the unit. Not the bulb.
From your picture, i can only make out the last 3 letters printed on the bulb socket
If you very carefully test the live socket, at max power to obtain the voltage and current type, it will be easy to find a bulb to match.
And you can do tye poor mans trick of powering the bulb, then rolling it to the point the filliment makes connection and welds itself back. No greater
feeling of pride than when it works
"You can't do that" - challenge accepted
|
|
|
Sulaiman
International Hazard
Posts: 3692
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The imprint on the lamp is 250V 6W.
Bayonet connection (BC) type B22 I think.
Edit : 15mm not 22mm...
[Edited on 15-4-2023 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Maybe this one
https://www.grainger.com/product/4RZW5
$2
"You can't do that" - challenge accepted
|
|
|
Cathoderay
Hazard to Self
Posts: 54
Registered: 29-1-2023
Location: US-Texas
Member Is Offline
|
|
It would be vitally important that you read the voltage rating on the bulb base.
It isn't quite clear enough in the photo.
DC in this case means Double Contact (on the bottom).
Are the two projections on the side of the brass base at the same distance from the bottom?
If they are at the same distance then it is a DC Bayonet base, if they are at a different distance then it is a DC Index base.
The bulb is probably a S-8 shape, US automobiles used to use this type for tail lights years ago. But those were rated 6 or 12V.
I have a miniature lamp catalog but none are listed that are rated for voltages over 55V.
[Edited on 4/14/2023 by Cathoderay]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
