VeritasC&E
Hazard to Others
Posts: 176
Registered: 29-1-2018
Member Is Offline
Mood: No Mood
|
|
Best Way to Dehydrate a Bunch of CaSO4
What is the best way (as most energy efficient + fastest / most convenient) way to dehydrate (not completely but hemihydrate state, thus with
sufficient temperature control) a bunch of CaSO4 (~10Kg)?
Is microwave a suitable method?
Can microwave form arcs with CaSO4 (or with metal salts)?
If I skip temperature control and dehydrate it completely, can I just leave it stored in a closed container with adequate amounts of H2O thrown in
hoping that it will homogenise to produce a uniform mass or hemihydrate after a few weeks/months?
__
[Edited on 3-9-2022 by VeritasC&E]
|
|
|
Sulaiman
International Hazard
Posts: 3724
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
There are a couple of things to consider when heating gypsum (dihydrate) to plaster (hemihydrate),
Gypsum and plaster are poor thermal conductors - spread thinly on a tray/hot surface
micro-pockets of steam burst, emitting very fine dust - disposable oven/kiln or a big clean up
Water added to bulk anhydrate or hemihydrate forms a solid lump of dihydrate.
Keeping moisture OUT is required.
PS probably the cheapest and easiest way to get small quantities of the hemihydrate is to buy plaster 
('plaster of Paris' is the purest type - I believe)
[Edited on 4-9-2022 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
VeritasC&E
Hazard to Others
Posts: 176
Registered: 29-1-2018
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Sulaiman  | There are a couple of things to consider when heating gypsum (dihydrate) to plaster (hemihydrate),
Gypsum and plaster are poor thermal conductors - spread thinly on a tray/hot surface
micro-pockets of steam burst, emitting very fine dust - disposable oven/kiln or a big clean up
Water added to bulk anhydrate or hemihydrate forms a solid lump of dihydrate.
Keeping moisture OUT is required.
PS probably the cheapest and easiest way to get small quantities of the hemihydrate is to buy plaster
('plaster of Paris' is the purest type - I believe)
[Edited on 4-9-2022 by Sulaiman] |
Thank you Sulaiman!
What about the microwave: Can I use a microwave to dehydrate it? Up to what approximate amount could I process at a time in w microwave? And what
would be the approximate dehydration time in the microwave per batch?
|
|
|
SplendidAcylation
Hazard to Others
Posts: 203
Registered: 28-10-2018
Location: Starving in some deep mystery
Member Is Offline
Mood: No one I think is in my tree.
|
|
| Quote: Originally posted by VeritasC&E |
If I skip temperature control and dehydrate it completely, can I just leave it stored in a closed container with adequate amounts of H2O thrown in
hoping that it will homogenise to produce a uniform mass or hemihydrate after a few weeks/months?
__
[Edited on 3-9-2022 by VeritasC&E] |
No 
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Sulaiman |
PS probably the cheapest and easiest way to get small quantities of the hemihydrate is to buy plaster
('plaster of Paris' is the purest type - I believe)
[Edited on 4-9-2022 by Sulaiman] |
I'd agree with that !
But the old way certainly did give an inconsistent product.
Ground gypsum used to be heated by ovens under the hill of Montmartre.
The hill was pierced by two entries from which Paris inhabitants could see the smoke rising and red glow in the night. Quite the Hellish view !
In the morning, quarry workers collected the homeless who had slipped in to find a warm place for the night and suffocated because of CO2.
Anyway, you'll want to look specifically for plaster of Paris or plain plaster.
There are other plasters: White of Meudon, White of Spain (maybe translated Spanish White etc. Those for example contain clay, so if you are looking
for a chemically pure product you'll want to read the label.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
|
yobbo II
National Hazard
Posts: 765
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
"If I skip temperature control and dehydrate it completely, ..."
Why do you want the hemihydrate as opposed to the anydrous?
I am asking because I simply don't know if the end result of adding water gives the same result.
Would putting it under a vacuum do the job?
"n the morning, quarry workers collected the homeless who had slipped in to find a warm place for the night and suffocated because of CO2."
Something similar would happen in a 'lime kiln' used to convert limestone into CaO except it was CO that did the killing.
Yob
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
