Pages:
1
2 |
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Distilled some EtOH denatured with Bitrix, and the distillate smells funny
I use a decent amount of ethanol and typically I'll just buy a few 750mL bottles of Everclear from Walmart, dry them with sieves for a few days, then
react it with some sodium to get rid of the last vestiges of water, then distill it. But that's getting a bit expensive, so I started looking for some
denatured ethanol that I could... de-denature?
The product I settled on was this 200 Proof Ethanol - Denatured with Bitrix by USA Pure. The "Bitrix" they refer to is the bitterant denatonium
benzoate, which unlike other bitterants, is a solid that has a relatively high melting point. So in theory, it should completely stay behind once it's
been distilled.
I distilled about 2L of it today, and to my surprise, the distillate doesn't smell like pure ethanol. It smells like some bitterant (maybe slightly
like tert-Butyl alcohol, but not nearly as intense or bad). I also can't find a damn SDS/MSDS sheet for it to verify that it only has the one
bitterant included.
Questions: Has anyone used this brand of Ethanol before and stripped out the denatonium benzoate?
Did it have a smell left over afterwords?
Could it be possible that there are other denaturants or bittering agents in this than just Bitrix? Is there an easy way to test (other than NMR or
chromotography)?
Thanks
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
The classic additive around here was 2% MIBK. I think it forms an azeotrope that makes it impossible to distill off, but it rarely affects performance (at least as a solvent).
We're not banging rocks together here. We know how to put a man back together.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by Fulmen ![](images/xpblue/lastpost.gif) | The classic additive around here was 2% MIBK. I think it forms an azeotrope that makes it impossible to distill off, but it rarely affects performance (at least as a solvent).
|
Hmm... I have my doubts. When I lookup MIBK, the NIOSH page for it says it's a "Colorless liquid with a pleasant odor." While this
odor isn't as bad as the EtOH I got that was denatured specifically with tert-Butyl alcohol, it's still far from a pleasant odor.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
It's been a while since I've been around the stuff, I remember the smell as stronger and more distinct than EtOH. I wouldn't want to call it bad, but
you really wasn't tempted to take a sip either.
We're not banging rocks together here. We know how to put a man back together.
|
|
Twospoons
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1311
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
As I recall the whole purpose of the denaturants is to make the alcohol undrinkable (and therefore not taxable), and they are usually chosen such that
simple distillation wont work - as that is a process that is far too accessible for most people.
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 513
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
FYI you don't need to find the SDS to know that there is more than just Bitrix in the denatured alcohol because it is not legal to denature alcohol
with just Bitrix. Here is a list of all formulas that can be sold as denatured alcohol in the US:
The closest I can find is Formula #40-B under Speciallty Denatured Spirits with the following additives: https://www.law.cornell.edu/cfr/text/27/part-21
§ 21.76 Formula No. 40-B.
(a) Formula. To every 100 gallons of alcohol add:
One-sixteenth avoirdupois ounce of denatonium benzoate, N.F., and 1/8 gallon of tert-butyl alcohol.
So you probably are smelling the t-butyl alcohol.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
I already distilled something like 10L of bitrex denaturated alcohol (but this is not your brand, I buy it in NL). The lable says there is only bitrex
in addition to EtOH but I suspect there are other additives. When distill I put NaOH or KOH in the source flask and after the distillation the rest
(~10% alkali solution) is usually colored orange-brown. That's why I suspect it is not only bitrex. Also the smell of the product is pure EtOH when I
use this method.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by teodor ![](images/xpblue/lastpost.gif) | I already distilled something like 10L of bitrex denaturated alcohol (but this is not your brand, I buy it in NL). The lable says there is only bitrex
in addition to EtOH but I suspect there are other additives. When distill I put NaOH or KOH in the source flask and after the distillation the rest
(~10% alkali solution) is usually colored orange-brown. That's why I suspect it is not only bitrex. Also the smell of the product is pure EtOH when I
use this method. |
Great, I'll try this. What does the NaOH/KOH do? And which would you recommend, NaOH or KOH?
Edit: I'm going to try to reprocess 1.5L of the EtOH. How much KOH would you recommend? I added 20g KOH flakes, didn't seem like it was very much tho,
do I need more?
Maybe I should just add some straight up sodium metal?
[Edited on 12-1-2023 by SuperOxide]
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Quote: Originally posted by teodor ![](images/xpblue/lastpost.gif) | I already distilled something like 10L of bitrex denaturated alcohol (but this is not your brand, I buy it in NL). The lable says there is only bitrex
in addition to EtOH but I suspect there are other additives. When distill I put NaOH or KOH in the source flask and after the distillation the rest
(~10% alkali solution) is usually colored orange-brown. That's why I suspect it is not only bitrex. Also the smell of the product is pure EtOH when I
use this method. |
In Europe denaturated EtOH usually contains around 1,5% MEK, 1,5% i-PrOH and 0,01% denatonium benzoate. I don't how in NL, but in CZ you can find
safety data sheet online which have list of all components (or at least EtOH from Severochema have safety data sheet online, I don't know if other
companies give you that).
Quote: Originally posted by SuperOxide ![](images/xpblue/lastpost.gif) |
Great, I'll try this. What does the NaOH/KOH do? And which would you recommend, NaOH or KOH?
Edit: I'm going to try to reprocess 1.5L of the EtOH. How much KOH would you recommend? I added 20g KOH flakes, didn't seem like it was very much tho,
do I need more?
Maybe I should just add some straight up sodium metal?
[Edited on 12-1-2023 by SuperOxide] |
Aldol condensation. MEK react with itself in alkaline solution to form compounds with higher boiling point. But this can't help you remove t-BuOH. You
can use this method just for removal of ketones.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by Bedlasky ![](images/xpblue/lastpost.gif) | Quote: Originally posted by teodor ![](images/xpblue/lastpost.gif) | I already distilled something like 10L of bitrex denaturated alcohol (but this is not your brand, I buy it in NL). The lable says there is only bitrex
in addition to EtOH but I suspect there are other additives. When distill I put NaOH or KOH in the source flask and after the distillation the rest
(~10% alkali solution) is usually colored orange-brown. That's why I suspect it is not only bitrex. Also the smell of the product is pure EtOH when I
use this method. |
In Europe denaturated EtOH usually contains around 1,5% MEK, 1,5% i-PrOH and 0,01% denatonium benzoate. I don't how in NL, but in CZ you can find
safety data sheet online which have list of all components (or at least EtOH from Severochema have safety data sheet online, I don't know if other
companies give you that).
Quote: Originally posted by SuperOxide ![](images/xpblue/lastpost.gif) |
Great, I'll try this. What does the NaOH/KOH do? And which would you recommend, NaOH or KOH?
Edit: I'm going to try to reprocess 1.5L of the EtOH. How much KOH would you recommend? I added 20g KOH flakes, didn't seem like it was very much tho,
do I need more?
Maybe I should just add some straight up sodium metal?
[Edited on 12-1-2023 by SuperOxide] |
Aldol condensation. MEK react with itself in alkaline solution to form compounds with higher boiling point. But this can't help you remove t-BuOH. You
can use this method just for removal of ketones. |
Since the KOH is just a catalyst, I probably added too much, but it'll be fine.
I'm refluxing it now, and it seems to be working since it turned yellow (pic below) and is slowly getting darker.
![](https://i.imgur.com/u89XwgN.jpg)
[Edited on 13-1-2023 by SuperOxide]
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I think you are smelling MEK, even in pure ethanol it has a distinctive smell. I always reflux an hour or so before starting the distillation, as
otherwise a good portion (first 20% or so) of the distillate will smell. I never checked how much hydroxide I used, a good dash. Probably more than 20
grams per 1.5 liters.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by Tsjerk ![](images/xpblue/lastpost.gif) | I think you are smelling MEK, even in pure ethanol it has a distinctive smell. I always reflux an hour or so before starting the distillation, as
otherwise a good portion (first 20% or so) of the distillate will smell. I never checked how much hydroxide I used, a good dash. Probably more than 20
grams per 1.5 liters. |
Well, I ended up going with 30g. Since the KOH is just being used as a catalyst for the aldol condensation, I figured it didn't really need much as
long as I refluxed it for a bit.
After adding 30g of KOH to 1.5L of smelly denatured EtOH, I refluxed for just over 2.5 hours, at which point it turned very dark red in color:
![](https://i.imgur.com/IWCB8uU.jpg)
Now I'm fractionally distilling the ethanol. I ditched the first ~100mL that came over and I'll keep everything except the last ~200mL of nasty dark
polymerized aldol condensate that's left.
Even though the distillation isn't done, I can still smell some musky odor from the distillate. So I may repeat this process again to see if it
polymerizes again, and if it turns the same dark red.
Updates to come!
[Edited on 13-1-2023 by SuperOxide]
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
I'm quoting the process of a guy who turned Australian diggers brand metho aka denatured alcohol or methylated spirits into drinkable ethanol:
Firstly Oz metho contains no methanol so forget that problem
next problem is the bitrex & the mek/mibk impurity and standing over
caustic soda+stirring overnight followed by distilling gave an improved
but not yet pure product that maybe had t-butyl or isopropyl still in there which was removed by a fractional distillation. The last impurity was
thought to be cyclohexane
and was removed by diluting product down to 40% with water (it turned cloudy) and mixing with cooking oil(can't remember which one) which removed a
peppermint smelling impurity and clarified the cloudy liquid. There was also a carbon filtration and a distillation with heads and tails removed at
some points.this is a summary of a long post but all vital points are made
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
There's a point where it's easier to start with sugar, water and yeast.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
If it got to that point, I would just buy a case of everclear and Dehydrate that, which is what I was doing before this denatured ethanol.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Fermentations don't produce pure alcohol. Trust me, personal experience... ![:(](./images/smilies/sad.gif)
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Well, I've finally got it down to a decent process.I had to do a couple more cycles of adding more KOH and refluxing longer, but eventually the
distillate comes over with pretty much no odor now (other than the typical EtOH odor).
Nothing left but to scale it up and process the rest of the gallon! I think now would be a great time to brag about a new purchase that I had a hard
time finding. A brand new 45/50 4L Kimble Erlenmeyer flask for situations just like this :-D
![](https://i.imgur.com/Vafcm49.jpg)
I had a hell of a time finding jointed erlenmeyer flasks over 2L, so a Kimble brand 4L flask with 45/50 joint... No way could I say no to that.
I added a truckload of KOH to the denatured Ethanol in the flask, and i'll let it stir over night, then tomorrow ill reflux it (probably for the whole
day), then get to fractional distillation eventually.
Thanks for the input everyone! As always, much appreciated :-)
P.S. If youre interested in an oversized jointed Erlenmeyer flask, reach out to LabProglass on ebay (very reputable vendor). They even have a 5000 mL Erlenmeyer flask available. Neither the 4L or 5L were listed, I had to ask them for them before they would list them (kinda weird, but
whatever). So if you don't see what you want, just message them.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1638
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
I'm going that method, 55 gallons at ideal 20%, sadly that's the easy part the yeast does the work there.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1638
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Don't know many who ever tried to drink the mash !
I prefer triple pass over a nice 4 foot packed reflux!
|
|
Lionel Spanner
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 14-12-2021
Location: near Barnsley, UK
Member Is Offline
|
|
Quote: Originally posted by Bedlasky ![](images/xpblue/lastpost.gif) | In Europe denaturated EtOH usually contains around 1,5% MEK, 1,5% i-PrOH and 0,01% denatonium benzoate. I don't how in NL, but in CZ you can find
safety data sheet online which have list of all components (or at least EtOH from Severochema have safety data sheet online, I don't know if other
companies give you that). |
European denatured alcohol is standardised as per Regulation 2018/1880, the standard recipe being 1% v/v methyl ethyl ketone, 1% v/v isopropyl alcohol and 0.001% w/v Bitrex.
A few member states use higher concentrations of denaturants, and Czechia and Greece use mixtures without Bitrex.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
MEK forms a fairly convenient azeotrope.
Stripping out IPA would be harder, but for a lot of things it wouldn't matter.
I did discover that you can use cation exchange resin to strip out the violet dye and pyridine that they used to use.
I think it would work for bitrex too.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) | MEK forms a fairly convenient azeotrope.
Stripping out IPA would be harder, but for a lot of things it wouldn't matter.
I did discover that you can use cation exchange resin to strip out the violet dye and pyridine that they used to use.
I think it would work for bitrex too. |
Honestly, this now is just an exercise in seeing just how pure I can get this to be. I've decided that from now on, I'll just go with Everclear, then
use 3A sieves, then add in some sodium, and distill and store over sieves. That's so much less work than denaturing this crap..... Almost like that's
the point? lol..
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 867
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Can you do a tlc plate, find an eludent mixture that provides seperation?
"You can't do that" - challenge accepted
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
So doing a fermentation using water, sugar and turbo yeast, then distilling the filtered liquid in a big distiller with column filled with ratchig
rings dont produce ethanol?
Discarding the liquid coming over first (forerun) then dilute distillate to 40% and then running it through a pipe filled with activated carbon.
I have made drinkable ethanol like this a lot in the past and its way better than store bought drinkable ethanol.
This must surely be just ethanol, or am i wrong about this?
I have plans to do this again but adding a second distillation step to get it to high % and then use this for chemistry experiments.
But is this pure ethanol?
It sure is drinkable and tastes good.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Fermentation doesn't give you pure alcohol. I don't imagine anyone thought it did.
But the impurities produced by fermentaion are not specifically chosen to be hard to remove from pure alcohol.
So, if you want pure alcohol, should you start with wine or with denatured spirits?
|
|
Pages:
1
2 |