John paul III
Hazard to Others
Posts: 110
Registered: 28-4-2018
Member Is Offline
Mood: No Mood
|
|
How to remove arsenic from arsenopyrite tailings?
I have a few tons of tailings from an arsenic mine. It used to be arsenopyrite, after roasting its mostly iron oxides with some (2.6%) arsenic
contamination. Is there a way to remove the arsenic or concentrate the iron oxides?
|
|
Rainwater
National Hazard
Posts: 957
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
I ran into some ore like that a few months ago.
It wound up being processed with gold ore and entered into solution,
scared the crap out of me when i finally figured out what it was.
I used a ball mill then concentrated NaOH leaching to break up the rock, then panned the concentrates and performed a magnetic seperation to pull out
the iron.
KNO3 + HCl
Ended up with a very consentrated arsenic solution.
Not sure if this would be economical on a large scale, and its deffenetly very toxic.
not the easiest method. But most the reagents are recoverable for the next run
"You can't do that" - challenge accepted
|
|