pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
thermometer
Hi,
is SAFE the use of a laser/infrarred thermometer in ethanol... at ambient temp or > 40ºC???
Maybe the ther. make a average temp reading with the flask and the liquid inside???
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
I have found that infrared thermometers (well mine at least) seem to give a slightly lower temperature reading when measuring through the side of a
breaker vs measuring from over the top down into the liquid. I would be very curious to know more about how infrared radiation is emitted from a
liquid and glass vessel combination. My guess is that most of what is emitted away from the surface of the liquid or vessel is then absorbed into the
liquid so it is only really what is emitted from the surface that is able to be detected by the thermopile. So, if you are measuring through the side
you are measuring the temperature of the glass and if measuring down from the top then you are measuring the surface of the liquid. Though glass is
pretty transparent to infrared, so some portion of the infrared must pass through.
|
|
pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
I was afraid! I read in some place glass filtrate a lot of infrared, ultraviolet... but the laser really can ignite the inflammable liquid??? maybe
the best is make a try :-)
|
|
Texium
|
Thread Moved 19-12-2022 at 12:25 |