6dthjd1
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 70
Registered: 30-6-2018
Member Is Offline
|
|
liquifying SO2 into a disoposable helium tank
I've read the sulfur dioxide and Ammonia both liquify relatively easily compared to other common gases.
Sulfur dioxide is said to be not very aggressive to steel when dry.
The tank once held 14.9 cubic feet of helium.
So I was wondering if I could fill it with roughly 900 grams of sulfur dioxide?
https://fire.lacounty.gov/wp-content/uploads/2019/08/Gas_Con...
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
900 grams wouldn't fill a 420 liter cylinder would it? If you would pull a complete vacuum on the tank and fill it with 14 moles of SO2 you would
still have a vacuum in the tank.
|
|
6dthjd1
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 70
Registered: 30-6-2018
Member Is Offline
|
|
Quote: Originally posted by Tsjerk ![](images/xpblue/lastpost.gif) | 900 grams wouldn't fill a 420 liter cylinder would it? If you would pull a complete vacuum on the tank and fill it with 14 moles of SO2 you would
still have a vacuum in the tank. |
I think the tank has residual air. the helium was only 80%.
Given that this is disposable I would rather not fill it to the max (80% of capacity for safety reasons)
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Quote: Originally posted by 6dthjd1 ![](images/xpblue/lastpost.gif) |
I think the tank has residual air. the helium was only 80%.
Given that this is disposable I would rather not fill it to the max (80% of capacity for safety reasons) |
Then how will you get the gas out?
|
|
6dthjd1
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 70
Registered: 30-6-2018
Member Is Offline
|
|
Well I just learned the tank is still filled It gives a rushing sound when the black nozzle is bent.
So I guess I have no cylinder to use.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4552
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by Tsjerk ![](images/xpblue/lastpost.gif) | 900 grams wouldn't fill a 420 liter cylinder would it? If you would pull a complete vacuum on the tank and fill it with 14 moles of SO2 you would
still have a vacuum in the tank. | The cylinder is much smaller. The cubic feet figure is based on
uncompressed volume. The liquid volume would only be about 560 mL, based on the chart that OP linked. Given that, the 900 g of SO2 isn't
far off. I calculated about 800 grams myself.
So in theory, yes, it's possible. However, it's very poor and unsafe practice to refill a cylinder that is not intended to be refilled, especially
with a different gas than what it was designed for. Especially with a gas that is potentially corrosive. In order to accomplish this, you'd need to
generate clean SO2, get it bone dry somehow, and then cool it in your cylinder to below -10ÂșC without allowing any water vapor to condense
with it, before sealing the cylinder. Not an easy task whatsoever, and it's still a bad idea from a safety perspective even if you did everything
right.
|
|