Gammatron
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 125
Registered: 30-8-2022
Location: Abandoned Uranium Mines
Member Is Offline
|
|
Best spray paint for inside of fume hood blower
I am replacing my fume hood blower for obvious reasons. I painted this with regular black spray paint which worked for a while but ended up being
unreliable. I am putting a new blower together and I'm wondering what would be a better type of paint, mainly for acid fumes. Amazon has this epoxy enamel which seems like it could be good, I was also considering appliance epoxy, plain enamel or spray on rubber like flex seal or
undercoating. Any ideas?
![304964399_413311720912616_3816550283597873664_n.jpg - 583kB](https://www.sciencemadness.org/whisper/files.php?pid=676489&aid=94726)
[Edited on 9-6-2022 by Gammatron]
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Epoxy enamel is probably the way to go. That’s what I used when I built my fume hood, and it seemed to work well, but I didn’t have much time to
abuse it before I moved, so I can’t vouch for it 100%. I’d be wary of Flex Seal turning into sticky goop.
|
|
Gammatron
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 125
Registered: 30-8-2022
Location: Abandoned Uranium Mines
Member Is Offline
|
|
You're probably right about flex seal, especially with nitric acid.
|
|
Gammatron
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 125
Registered: 30-8-2022
Location: Abandoned Uranium Mines
Member Is Offline
|
|
I just found this stuff, much cheaper than the epoxy and specifically states good chemical resistance. Seems like a good option.
|
|
justender
Harmless
Posts: 9
Registered: 2-6-2024
Location: SW, US
Member Is Offline
|
|
Just in case anyone is looking for this in a decade, when the Amazon seller has moved on: SEYMOUR 620-1431 Industrial MRO High Solids Spray Paint,
Light Gray Primer
|
|
charley1957
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 155
Registered: 18-2-2012
Location: Texas
Member Is Offline
Mood: Extracted
|
|
This looks like some pretty good stuff. I’d certainly give it a try. I just painted some chemical storage cabinets after a rust problem due to a
small chlorine compound leak. I used appliance epoxy after sandblasting out the rust. I suppose one might be as good as the other.
You can’t claim you drank all day if you didn’t start early in the morning.
|
|